Casio XJ-UT351WN SERIES Bedienungsanleitung

Network Connection Guide

Be sure to keep all user documentation handy for future reference.

To obtain the latest version of this manual visit the website at the URL below.

http://world.casio.com/manual/projector/

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the

United States and other countries.

Mac OS is a trademark or registered trademark of Apple Inc. in the United States and other

countries.

Other company and product names may be registered product names or trademarks of their

respective owners.

The contents of this User’s Guide are subject to change without notice.

Copying of this manual, either in part or its entirety is forbidden. You are allowed to use this

manual for your own personal use. Any other use is forbidden without the permission of CASIO

COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third

parties arising out of the use of this product or this manual.

CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of

data due to malfunction or maintenance of this product, or any other reason.

The sample screens shown in this manual are for illustrative purposes only, and may not be

exactly the same as the screens actually produced by the product.

MA1703-A

Network Connection is an application you can use to establish a LAN connection between a projector

and a computer, and to send display images, movies, and audio from a connected computer to the

projector.

Important!

The explanations in this section assume there is already a LAN connection between the

projector and computer, and that the computer screen contents are being projected. Before

performing the procedures in this section, you should use the procedure under “Projecting

Computer Screen Contents Over a LAN Connection” (see the separate “Network Function

Guide”) to establish a LAN connection between the projector and computer.

The Network Connection window shown below is displayed while there is a LAN connection between

the projector and computer.

Note

The Network Connection window, display screens, and notation used in this manual are all

based on Windows. These all may be somewhat different when running on Mac OS.

Network Connection Window

Project video stream button

Function menu button

Minimize button

Close button

Projection indicator

Stop button

Pause button

Project PC screen button

Project 1 screen button

Project 4 screens button

While there is a LAN connection between the projector and a computer, you can use the buttons on

the Network Connection window to perform the operations described below.

Network Connection Operations

Network Connection Button Operations

To do this: Click this button:

Project a single computer screen that fills the entire

projection screen images (project 1 screen)

(project 1 screen)

Divide the projection screen into four parts and project

four computer screens (project 4 screens)

One of the following buttons*1: , , ,

Freeze/unfreeze the computer screen that is currently

being projected

(pause)

Project a movie without displaying it on the computer

(project video stream)

For more information, see “Projecting a Video Stream”

on page 6.

Stop computer screen projection (stop)

Exit Network Connection (close)

*1 Clicking a button will project the computer screen image in the corresponding location: (1) Upper

left, (2) Upper right, (3) Lower left, (4) Lower right.

While there is a LAN connection between the projector and a computer, you can use the items on the

Network Connection function menu (which appears when you click the function menu button) to

perform the operations described below.

Network Connection Function Menu Operations

To do this: Select this function menu item: Refer to:

Prioritize display speed over projection

screen image quality*1

[Projection Setting] 3

[High-speed] –

Prioritize projection screen image

quality over display speed*1

[Projection Setting] 3

[High-resolution] –

Output computer audio from the

projector speaker [Audio Out] “Outputting Computer Audio from

the Projector Speaker” (page 5)

Switch from main screen projection to

extended screen projection*2

[Select the Projection Screen] 3

[Extended Screen] –

Switch from extended screen projection

to main screen projection*2

[Select the Projection Screen] 3

[Main Screen]

Use a smart device for remote control

of a computer that is running Network

Connection

[PC Remote]

“Remotely Controlling a Computer

from a Smart Device” (page 7)

Configure projector network settings

[Admin Screen]

“Using the Projector Admin Pages”

(See the separate “Network

Function Guide”.)

Remotely control the projector over a

LAN connection [Admin Screen]

“Remotely controlling the Projector

Over a LAN Connection” (See the

separate “Network Function

Guide”.)

Change the wireless LAN connection to

another projector [Server Search]

“To terminate the current wireless

LAN connection and re-connect”

(page 8)

Create a copy of Network Connection

on a USB flash drive*1[Token Wizard] “Using the Token Wizard (Windows

only)” (page 9)

Have your computer automatically

connect to an access point whenever

Network Connection is started up*3

[Auto WiFi Connect] –

Delete connection information

(passphrase) stored by Network

Connection*1

[Initialize]

“To delete connection information

(passphrase) stored by Network

Connection” (page 8)

Show the IP address and login code of

the projector connected via LAN [Info] –

Display Network Connection version

information [About] –

Exit Network Connection [Exit] –

*1 Not supported when running on Mac OS.

*2 With Windows 8/8.1/10 and Mac OS, installation of driver software is required to enable these

functions. See “Add-on Driver Software” (page 5).

*3 Not supported when running on Windows.

You can use Network Connection to output computer audio from the projector speaker while a

computer screen is being projected over a LAN connection.

To output computer audio from the projector speaker, select [Audio Out] on the Network

Connection function menu so there is check mark next to it.

Enabling projector speaker output will mute the audio output from the computer speaker(s).

To disable projector speaker audio output and re-enable output from the computer speaker(s),

select [Audio Out] on the function menu again to remove the check mark.

Note

The function menu [Audio Out] item is unchecked (disabled) whenever you start up Network

Connection.

Use of some parts of the Network Connection requires installation of the driver software shown in the

table below. For information about how to obtain this software, go to the CASIO website

(http://world.casio.com/download/projector/).

Outputting Computer Audio from the Projector Speaker

Add-on Driver Software

To use this function: Install this driver software:

Extended screen output function VDD driver (for Windows 8/8.1/10)

Syphon-Virtual-Screen*1(for Mac OS)

Audio output function Sound Flower*1(for Mac OS)

*1 When installing Network Connection on a Mac OS, a dialog box will appear asking whether or not

you want to install Syphon-Virtual-Screen and Sound Flower. Be sure to select [Yes] if you plan to

use extended screen output and audio output. Extended screen output and audio output will not be

possible if you select [Skip].

You can use Network Connection to play a movie and output the playback image to the projector for

projection. Only the movie’s video stream is displayed on the projection screen. You can leave the

normal desktop and Network Connection window (which are not projected) on the computer screen.

Supported Playback Files

AVI: 20 Mbps maximum 720/30P (MJPEG video, ADPCM audio)

MOV: 20 Mbps maximum 1080/30P (H.264 video, ADPCM audio or AAC audio)

MP4: 20 Mbps maximum 1080/30P (H.264 video, AAC audio)

To project a video stream

On the Network Connection window, click (project video stream).

This will cause the appearance of the Network Connection window to change as shown

below.

Click (select file).

Use the select file dialog box that appears to select the movie file you want to

play and then click [Open].

This starts playback of the file you selected and displays a full-screen view of the movie on the

projection screen.

To stop movie playback, click (stop).

To return to normal computer screen projection, click (project PC screen).

Note

After stopping playback in step 4 of the above procedure, you can restart playback from the

beginning of the file (movie) by clicking (play).

Video stream projection is always performed in full-screen view. In this case, the projection

screen cannot be divided into four parts as when projecting computer screen images.

When projecting a video stream the audio of the movie is always output by the projector.

Projecting a Video Stream

Project PC screen button

Stop button

Play button

Select file button

This section explains how to use a smart device for remote control of a computer running Network

Connection.

Important!

To perform remote control operation described here, your smart device will need to have

C-Assist installed on it (see the separate “Network Function Guide”).

To start PC remote

Perform the procedure under “Establishing a Direct Wireless LAN Connection

between the Projector and a Computer” in the separate Network Function Guide.

On the smart device, start up C-Assist and then perform the steps below.

(1) Log in to the projector.

(2) Enter PC Remote standby.

On the Network Connection window, click and then click [PC Remote] on the

menu that appears so there is a check mark next to it.

This will cause an image of the computer screen to appear on the smart device’s touch

screen.

The above indicates that you can use the smart device’s touch screen to perform computer

mouse operations. You can also use the smart device’s on-screen keyboard to input and edit

data on the computer.

Control the computer from the smart device as required.

To exit PC Remote

On the Network Connection window, click and then click [PC Remote] on the menu that appears

to clear the check mark next to it.

Remotely Controlling a Computer from a Smart Device

To terminate the current wireless LAN connection and

re-connect

On the Network Connection function menu, select [Server Search].

This terminates the current wireless LAN connection, and changes the projection screen to the

LAN connection standby screen.

Perform the procedure under “Establishing a Direct Wireless LAN Connection

between the Projector and a Computer” in the separate Network Function Guide.

To delete connection information (passphrase) stored by

Network Connection

On the Network Connection function menu, select [Initialize].

On the initialize confirmation dialog box that appears, click [OK] to initialize or

[Cancel] to cancel.

Restart the Network Connection.

Note

After you perform the above operation, the wireless LAN connection between the projector

and computer will be terminated. To re-establish a wireless LAN connection, perform the

operation under “Establishing a Direct Wireless LAN Connection between the Projector and a

Computer” in the separate “Network Function Guide”.

Other Network Connection Operations

You can use the Network Connection token wizard to copy Network Connection to a USB flash drive.

After you do that, you can run Network Connection on a computer that does not have the program

installed simply by plugging the USB flash drive (called a “USB Token”) into the computer’s USB port.

Using USB tokens is recommended when connecting to the projector from multiple computers.

To install Network Connection on a USB flash drive

Important!

Using the procedure below to install Network Connection on a USB flash drive creates a file

named “autorun.inf” (which is a Network Connection auto run file) in the USB flash drive root

directory. If the USB flash drive root directory already contains a file with the same name, the

existing file will be renamed by adding “.bak” or a three-digit number (.001, .002, etc.) to the

end of its file name.

Using the following procedure to install Network Connection on a USB flash drive will change

the name of the USB flash drive to “USB Token” and also change its icon to .

On the Network Connection window, click and then click [Token Wizard] on

the menu that appears.

This displays the token wizard.

Click [Next >].

This displays a USB drive selection screen.

If there is no USB flash drive connected to the computer, the message “USB memory could

not be detected.” will appear. If this happens, connect the USB flash drive and wait until its

USB flash drive name appears in the “USB Drive” box.

If there are multiple USB flash drives connected to the computer, click the []

button to the right of the “USB Drive” box and select the name of the drive where

you want to install Network Connection.

Click the [Next >] button.

This installs Network Connection on the specified USB flash drive. The message “Wizard

ended normally.” appears on the display after installation is complete.

Click [Exit] to close the token wizard screen.

To use a USB token to connect a computer to the projector via

a wireless LAN

Connect the USB token to the computer’s USB port and then double click the Network Connection

icon in the token. After Network Connection starts up, you can perform the same operations you do

when Network Connection is installed on a computer.

Using the Token Wizard (Windows only)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Casio Projektor Handbücher

Casio

Casio SC-210 Bedienungsanleitung

Casio

Casio XJ-S33 series Bedienungsanleitung

Casio

Casio XJ XJ-360 XJ-360 Bedienungsanleitung

Casio

Casio XJ-460 - 1 Bedienungsanleitung

Casio

Casio XJ-A Series Bedienungsanleitung

Casio

Casio XJ-A130 Bedienungsanleitung

Casio

Casio XJ-M145 Gebrauchsanweisung

Casio

Casio XJ-UT310WN Stücklistenhandbuch

Casio

Casio XJ-H1600 Bedienungsanleitung

Casio

Casio XJ-UT312WN Bedienungsanleitung

Casio

Casio XJ-M140/XJ-M145* Bedienungsanleitung

Casio

Casio SLIM XJ-A141 Bedienungsanleitung

Casio

Casio XJ-A130V/XJ-A135V* Bedienungsanleitung

Casio

Casio XJ-A246 Gebrauchsanweisung

Casio

Casio XJ-M145 Montage- und Wartungsanleitung

Casio

Casio pmn Bedienungsanleitung

Casio

Casio XJ-UT351W Bedienungsanleitung

Casio

Casio XJ-L8300HN Bedienungsanleitung

Casio

Casio XJ-H1750 Gebrauchsanweisung

Casio

Casio XJ-H1600 Bedienungsanleitung

Casio

Casio YC-400 - Document Camera Bedienungsanleitung

Casio

Casio XJ-350 Bedienungsanleitung

Casio

Casio XJ-S43W - WXGA DLP Projector Bedienungsanleitung

Casio

Casio XJ-A130 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung