Casio DT-X10 series Bedienungsanleitung

BL ABC DEF

GHI JKL MNO

PQRS

BS Alpha

TUV WXYZ

Handheld Terminal

User’s Guide

Series

Be sure to read “Safety

Precautions” inside this

manual before trying to use

your Handheld Terminal.

After reading this manual,

keep it in a safe place for

future reference.

E-8

Operating Precautions

Your Handheld Terminal is a precision digital instrument. Improper operation or rough

handling can cause problems with data storage and other problems. Note and observe

the following precautions to ensure proper operation.

•Do not continue operating the Handheld Terminal when battery power is low.

Doing so can cause data to be lost. When batteries go low, charge them as soon as

possible.

•Do not leave dead batteries in the Handheld Terminal for long periods.

Dead batteries can leak, leading to malfunction of and damage to the Handheld

Terminal.

•Use the Handheld Terminal only within the specified temperature range.

Use outside of the specified temperature range creates the risk of malfunction.

•Avoid using the Handheld Terminal in areas subject to the following conditions.

The following conditions create the risk of damage to the Handheld Terminal.

— Large amounts of static electricity

— Extreme heat or extreme cold

— High humidity

— Sudden temperature extremes

— Large amounts of dust

•Use only the special stylus that comes with the Handheld Terminal to operate its

touch screen and reset button.

•Do not use any instrument other than the special stylus to operate the touch

screen. Other instruments can scratch the touch screen and lead to malfunction.

•Never use thinner, benzene, cosmetic cleaning fluids, or other volatile agents to

clean the Handheld Terminal.

To clean the Handheld Terminal, wipe it with a dry cloth, or a cloth moistened in

a weak solution of water and a mild neutral detergent. Wring all excess moisture

from the cloth before wiping.

E-9

Introduction

•The contents of this manual are subject to change without notice.

•Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or any third

parties for any losses or damages arising from the use of this manual.

•This manual does not include any information about programming and download

procedures. See the applicable separate documentation for information about these

procedures.

Warranty and After Service

•This product comes with a warranty certificate. Carefully read the warranty

certificate and keep it in a safe place in case you need it in the future. Note that the

warranty is invalid and you will not be able to receive repairs covered by the warranty

if the product name, warranty period (purchase date), retailer name, and other

information are not filled in correctly on the warranty certificate. If your warranty

certificate is not filled out correctly, immediately contact your retailer to have it filled

out.

•Should this product ever malfunction, contact your original retailer and provide

information about the product name, the date you purchased it, and details about the

problem.

•In order to ensure worry-free operation, it is strongly recommended that you enter

into a maintenance contract when you purchase this product.

This product is a Class B information processing device that conforms to the standards

set forth by the Voluntary Control Council for Interference by Information Technology

Equipment (VCCI). Though this product is intended for use in a domestic environment,

it can cause interference with radio and TV reception if located too close to a radio or

television receiver. See the User’s Guide that comes with the product for details on how

to use it correctly.

E-10

CASIO Europe GmbH

Bornbarch 10, D-22848

Norderstedt, Germany

Please keep all information for future reference.

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not

applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC

emission limits.

Peripherals and Connectors

Battery Pack (DT-5023BAT)

Large-capacity Battery Pack (DT-5025LBAT)

AC Adaptor (AD-S42120)

Communication Card Cover (DT-892TCV)

Communication Card Cover (Large size) (DT-893TCV)

CF Card Extension Uint (DT-894CFU)

Connectors (DT-882RSC, DT-883RSC, DT887AXA, DT888RSC, DT-380USB, SB-201)

Declaration of Conformity

Model Number: DT-X10M20URC, DT-X10M30U, DT-X10M20U, DT-X10M30URC, DT-160IOE,

DT-167CHGE, DT-169CHGE, DT-5022CHGE

Trade Name: CASIO

Responsible party: CASIO, INC.

Address: 570 Mt. Plesant Avenue, Dover, New Jersey 07801

Telephone number: 973-361-5400

This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This device complies with Part 15 of FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undersired operation.

E-11

We, the undersigned.

Company CASIO Europ GmbH

Address, City Bornbarch 10, D-22848 Norderstedt, Germany

Country Germany

Phone number +49(0)40-528-65-0

Fax number +49(0)40-528-65-24

certify and declare under our sole responsibility that the following equipment:

Product description / Intended use

EU/EFTA member states intended for use EU: Austria, Belgium, Denmark, Finland, France,

Germany, Greece, Ireland, Italy, Luxembourg, The

Netherlands, Portugal, Spain, Sweden, United Kingdom

EFTA: Switzerland, Iceland, Lichtenstein, Norway

Member states with restrictive use NONE

Manufacturer CASIO COMPUTER CO., LTD.

Brand CASIO

Type DT-X10M30E, DT-X10M20E, DT-X10M30U,

DT-X10M20U

is tested to and conforms with the essential requirements for protection of health and the safety of the user

and any other person and Electromagnetic Compatibility, as included in following standards:

Standard lssue date

EN60950 1992

A1, 1993

A2, 1993

A3, 1995

A4, 1997

A11, 1997

EN301 489-1, 2001-09

EN301 489-17 2000

and is tested to and conforms with the essential radio test suites so that it effectively uses the frequency

spectrum allocated to terrestrial/space radio communication and orbital resources so to as to avoid harmful

interference, as included in following standards:

Standard lssue date

EN300-328-1 2000-07

EN300-328-2 2001-12

and therefore complies with the essential requirements and provisions of the Directive 1999/5/EC of the

European Parliament and of the council of March 9, 1999 on Radio equipment and Telecommunications

Terminal Equipment and the mutual recognition of their conformity and with the provisions of Annex III

(Conformity Assessment procedure referred to in article 10).

The technical documentation as required by the Conformity Assessment procedure is kept at the following

address:

Company CASIO Europ GmbH

Address, City Bornbarch 10, D-22848 Norderstedt, Germany

Country Germany

Phone number +49(0)40-528-65-0

Fax number +49(0)40-528-65-424

E-12

Contents

Safety Precautions .........................................................................................E-1

Operating Precautions ................................................................................... E-8

Introduction ....................................................................................................E-9

Before Getting Started .................................................................................E-14

Handheld Terminal System Configuration .................................................E-16

Optional Accessories ........................................................................................ E-16

General Guide ...............................................................................................E-19

Replacing the Battery ..................................................................................E-21

Replacing the Main Batteries ........................................................................... E-21

Attaching the Hand Strap ............................................................................ E-24

Configuring Handheld Terminal Settings ...................................................E-25

Calibrating Touch Screen Alignment ................................................................ E-25

Adjusting Display Contrast .............................................................................. E-25

Adjusting Display Brightness ........................................................................... E-25

Display Auto Dimmer ....................................................................................... E-26

Using the C-MOS Scanner ...........................................................................E-27

About the warning label ................................................................................... E-28

Performing Data Communication ...............................................................E-29

IR Data Communication ................................................................................... E-29

BluetoothTM Data Communication .................................................................... E-30

Resetting the Handheld Terminal ................................................................E-31

Performing a Full Reset (Initialization) ............................................................ E-32

DT-X10 Specifications ..................................................................................E-33

E-13

Using the Satellite Cradle (DT-160IOE) .......................................................E-34

General Guide ................................................................................................... E-34

Bundled Items ................................................................................................... E-34

Connecting the Satellite Cradle AC Adapter and Connecting to a Computer .. E-36

Configuring DIP Switch Settings ..................................................................... E-38

Using a Wall Mount Configuration .................................................................. E-39

Daisy Chaining Multiple Satellite Cradles (DT-160IOE) ................................ E-41

Satellite Cradle (DT-160IOE) Specifications ................................................... E-42

Using the Cradle-type Battery Charger ...................................................... E-43

General Guide ................................................................................................... E-43

Bundled Items ................................................................................................... E-43

Connecting the Cradle-type Battery Charger AC Adapter and Mounting

the Power PC Terminal ..................................................................................... E-45

Using a Wall Mount Configuration .................................................................. E-46

Cradle-type Battery Charger (DT-169CHGE) Specifications .......................... E-46

Using the Dual Battery Charger .................................................................. E-47

General Guide ................................................................................................... E-47

Bundled Items ................................................................................................... E-47

Charging a Battery Pack ................................................................................... E-49

Connecting Multiple Dual Battery Chargers .................................................... E-50

Dual Battery Charger (DT-5022CHGE) Specifications ................................... E-51

Using a PC Card ...........................................................................................E-52

Affixing a PC Card Remover Tape ................................................................... E-52

To load a PC card .............................................................................................. E-52

Using a CF Card Extension Unit .................................................................E-54

Bundled Items ................................................................................................... E-54

Attaching the CF Card Extension Unit ............................................................. E-54

Loading a CF Card ........................................................................................... E-55

CF Card Extension Unit (DT-894 CFU) Specifications ................................... E-55

Using a Rechargeable Battery Pack ...........................................................E-56

Battery Pack Specifications .............................................................................. E-56

Large-capacity Battery Pack Specifications ..................................................... E-56

E-14

Before Getting Started

Be sure to perform the following steps before trying to use the Handheld Terminal for

the first time.

1. When unpacking, check to make sure that everything is included.

Open the box and check to make sure that all of the items shown here are included.

Handheld Terminal Stylus

Large-capacity Battery Pack

Cover

Hand Strap

PC Card Remover Tape (2) User's Guide (this manual)

Warranty

2. Charge the battery pack.

Charge the separately available battery pack (DT-5023BAT or DT-5025LBAT). You

can use the Dual Battery Charger, the Cradle-type Battery Charger, or the Satellite

Cradle to charge a battery pack.

For information using these devices for charging, see page 36, 45, 49.

3. Load the battery pack into the Handheld Terminal.

1Slide the two battery pack lock switches to the “FREE” position, and then remove

the battery pack cover.

BL ABC DEF

GHI JKL MNO

PQRS

BS Alpha

TUV WXYZ

E-15

Load a battery pack (DT-5023BAT) or a large-capacity battery pack (DT-5025LBAT).

Take care that the battery pack is oriented correctly when you load it.

3Replace the

battery

pack cover, and then slide the battery pack cover lock switches

to the “LOCK”position. If you load a large-capacity battery pack, affix the large-

capacity battery pack cover.

4. Hold down the power key for about one second to turn on the Handheld Terminal.

Start up the application you want to use.

Stylus Operations

Tap: Lightly tap with the stylus once on the touch screen.

Tap and Hold: Hold the tip of the stylus against the touch screen without moving it.

Drag: Hold the tip of the stylus against the touch screen as you drag from one location

to another. This operation is the same as writing with a pencil on a piece of paper.

BL ABC DEF

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Casio Touch-Terminal Handbücher

Casio

Casio DT-X10M10E Bedienungsanleitung

Casio

Casio IT-G600 Series Bedienungsanleitung

Casio

Casio DT-X11 Series Bedienungsanleitung

Casio

Casio IT-10M20 Bedienungsanleitung

Casio

Casio DT-930M50E Bedienungsanleitung

Casio

Casio V-R100 Bedienungsanleitung

Casio

Casio DT-X5 Series Bedienungsanleitung

Casio

Casio V-REGI Series Bedienungsanleitung

Casio

Casio Cassiopeia IT-2000 Bedienungsanleitung

Casio

Casio IT-600M30 Bedienungsanleitung

Casio

Casio IT-G600 Series Bedienungsanleitung

Casio

Casio QT-6600 Bedienungsanleitung

Casio

Casio IT -G500 Series Bedienungsanleitung

Casio

Casio DT-X100 Series Bedienungsanleitung

Casio

Casio QT-6000 Installationsanleitung

Casio

Casio V-REGI Series Bedienungsanleitung

Casio

Casio BT-9100 Bedienungsanleitung

Casio

Casio QT-2100 Bedienungsanleitung

Casio

Casio IT-500 Series Bedienungsanleitung

Casio

Casio QT-6000 Bedienungsanleitung

Casio

Casio QT 6600 - 64 MB RAM Bedienungsanleitung

Casio

Casio DT-X8 Series Bedienungsanleitung

Casio

Casio DT-X8-20C-CNV Bedienungsanleitung

Casio

Casio DT-940 Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung