Cavalry CADA001U32A Bedienungsanleitung

User’s Guide: CADA-U32A Series RAID Enclosure

This guide contains instructions for changing the RAID settings on your CADA-U32A

Series Personal Disk Array. If you need assistance, please contact customer service

at [email protected]. The guide is structured as follows:

Product Diagrams - Page 2

RAID Settings Overview with Explanations - Page 3

Instructions for Changing RAID Settings - Page 4

Diagrams

Front View:

1. Power indicator

2. Rebuild indicator

3. HDD1 Access Indicator

4. HDD2 Access Indicator

5. HDD1 Error Indicator*

6. HDD2 Error Indicator*

7. Ventilation

*The error LEDs light up when the

corresponding hard drive fails, when

there are rebuilding errors and when

the corresponding hard drive is not

present.

Rear View:

1. Power switch

2. Power port

3. USB 2.0 port

4. Fan for ventilation

RAID Settings Descriptions

SINGLE MODE Array will show up as two independent drives. This function

can be used if only if two different brands and/or capacities

of HDDs (Hard Disk Drives) are installed.

SPANNING MODE Two HDDs will show up as a single drive with the combined

capacity of both drives. Spanning writes data sequentially

across two drives.

RAID 0 (Striping) Two HDDs will show up as a single drive with the combined

capacity of both drives. Speed and performance increase.

The two HDDs “stripe" data across the two drives. This splits

each piece of Data across both HDDs in segments in a way

that speeds up reading and writing times. However, RAID 0

does not offer any data protection: if one drive fails or is

damaged, all data can be lost.

RAID 1 (Mirroring) The RAID controller creates an extra copy (or mirror) of data

on the two drives. Only a single drive will show up on your

computer, and it will have the capacity of a single drive.

Data is protected from the failure of one drive. If one drive

fails, replace it with an identical drive and the data rebuilds

automatically.

Using this mode requires 2 identical HDDs; the two drives

must be the same capacity, brand and model number.

Changing RAID Settings

1. Start your computer and wait for your operating system to load completely.

2. Connect the square end of the USB 2.0 cable to your CADA-U32 disk array.

Connect the flat end of the USB 2.0 cable to your computer.

3. Connect the power cable to your CADA-U32 disk array. Connect the other end

of the power cable to an electrical outlet.

4. Turn on the drive.

5. You will need to uninitialize the drive before changing RAID settings. To do

this, follow the instructions for your Operating System. (Windows users, see

below; Mac OS X users, see page 7) If your operating system is not listed,

contact customer service for assistance.

Windows 2000/XP/NT/Vista

a. Go to the Start

Menu and click

on “Run”.

b. The Run dialog box will show up. Enter “cmd” in the text box then press

the <ENTER> key.

c. Virtual DOS command console window will start. You will see the blinking

cursor where you can type commands. Now type “diskpart” as shown then

press the <ENTER> key.

d. Now to use DISKPART. Warning: Be careful not to select your system

drive as you could erase it and your current Windows system!

i. Type “list disk” to show all of your physical drives. Identify which is

the external drive. Make sure you know which before continuing.

ii. Now select it by typing “select disk #”, where # is the number of

the drive listed in the disk list.

iii. You can check that you selected the drive properly by typing “list

disk” again. The table will appear again with an asterisk (*) next to

the selected disk.

iv. Now type “clean” to completely un-allocate and un-initialize your

disk. Make sure you’ve selected the correct disk before typing

“clean”.

v. The drive is cleaned now. You can type “exit” to exit DISKPART and

type “exit” again to exit the virtual DOS window, or just close the

window to get back to your Windows desktop. Continue to Step 6

(p.12).

i. 

ii. 

iv. 

v. 

Mac OS X

a. Go to top menu “Go” and select “Utilities”. The Utilities window opens.

Select “Disk Utility” to start the disk utility program.

b. Click the header on the left which starts with the drive size in gigabytes

(1). Now click on the “partition” tab on top (2). Disk Utility will switch to

it’s partitioning function pane. Now click on the dual arrow button under

“Volume Scheme” (3). Choose “1 partition” (4).

c. Now click on “Options” under the partition graph (1). The partition scheme

type selection window will pop up. Make sure the selection is “Apple

Partition Map” (2). Then click “OK” (3). You can leave the format type on

the right to “MAC OS extended (journaled)” (4). Then click “Apply” to start

partitioning (5).

d. The warning dialog for partitioning will pop up. Go ahead click “partition”.

e. The drive will start partitioning as shown. It should take a minimum of 2

minutes to finish.

f. You now have a MAC OS extended partition. We can now delete the

volume and clear the drive. Click anywhere on the partition graph

representing the partition. Notice the [+ / -] under the graph on the lower

left. Click the [-] button to delete the partition.

Andere Handbücher für CADA001U32A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cavalry Lagerung Handbücher

Cavalry

Cavalry CAUI35120 Bedienungsanleitung

Cavalry

Cavalry CAND3001T0 Bedienungsanleitung

Cavalry

Cavalry EN-CAUH-B Bedienungsanleitung

Cavalry

Cavalry CAXT3701T0 Bedienungsanleitung

Cavalry

Cavalry CAUE Series Bedienungsanleitung

Cavalry

Cavalry CADA001SA2-H Bedienungsanleitung

Cavalry

Cavalry CAUR25080 Bedienungsanleitung

Cavalry

Cavalry CACE3701T0 Bedienungsanleitung

Cavalry

Cavalry CAUQ25100 Bedienungsanleitung

Cavalry

Cavalry CAXA Series Bedienungsanleitung

Cavalry

Cavalry CADT001SA2 Bedienungsanleitung

Cavalry

Cavalry CAUA3701T0 Bedienungsanleitung

Cavalry

Cavalry CADA002SA8 Bedienungsanleitung

Cavalry

Cavalry CAND Series Bedienungsanleitung

Cavalry

Cavalry CAU3G Gebrauchs- und Pflegehandbuch

Cavalry

Cavalry Hurricane ACBS3501000F Stücklistenhandbuch

Cavalry

Cavalry CAUT3701T0 Bedienungsanleitung

Cavalry

Cavalry CADB Series Bedienungsanleitung

Cavalry

Cavalry CADB001U32 Merkblatt

Cavalry

Cavalry CAXB3701T0 Bedienungsanleitung

Cavalry

Cavalry CAUM3701T0 Bedienungsanleitung

Cavalry

Cavalry CAUP25160 Bedienungsanleitung

Cavalry

Cavalry CAXR SERIES Bedienungsanleitung

Cavalry

Cavalry CAUPT25160 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung