CB ELECTRONICS TMC-1-DMon Bedienungsanleitung

TMC1-DMon Monitor Controller
2016 CB Electronics 1 Version 1.0
CB Electronics
TMC-1-DMon Monitor Remote
Use with the TMC-1Reference
Version 1.0

TMC1-DMon Monitor Controller
2016 CB Electronics 2 Version 1.0
C
Co
on
nt
te
en
nt
ts
s
C
Co
on
nt
te
en
nt
ts
s............................................................................................................................................ 2
T
Tr
ri
in
nn
no
ov
v
D
D-
-M
Mo
on
n ................................................................................................................................... 4
TMC-1-DMon User guide............................................................................................................... 4
Ethernet Connection .................................................................................................................... 4
Setting the TMC-1 P Address from the TMC-1-win/mac program................................................ 5
D-Mon nputs.............................................................................................................................. 6
D-Mon Dim ................................................................................................................................. 6
D-Mon 4.1 mplementation .......................................................................................................... 7
D-Mon E-Net Pages ................................................................................................................... 9
Discovery.................................................................................................................................... 9
Network Page: ........................................................................................................................... 9
Socket Debug:........................................................................................................................... 9
Other D-Mon Pages................................................................................................................... 9
Cue Sends Page:..................................................................................................................... 10
Session Snapshots Page: ......................................................................................................... 10
Studio Presets page:................................................................................................................ 10
Phones Source Page............................................................................................................... 10
H
HD
D1
15
5
C
Co
on
nn
ne
ec
ct
to
or
r
(
(X
XM
Mo
on
n)
)............................................................................................................ 12
Talkback Microphone and Headphone................................................................................... 12
nternal Talkback Microphone ............................................................................................... 12
Headphone Jack .................................................................................................................... 12

TMC1-DMon Monitor Controller
2016 CB Electronics 3 Version 1.0
Connecting to a con Console (D-Control or D-Command)............................................... 13
HD 15 Connector fitted to TMC-1 units .................................................................................. 14
15 pin “XMON” Headphone and Microphone Connections ..................................................... 15
D
D-
-M
Mo
on
n.............................................................................................................................................. 16
Trinnov Main Page................................................................................................................... 16
Trinnov Studio Setup Page ...................................................................................................... 17
Trinnov Session Configure........................................................................................................ 17
B
Ba
as
ss
s
E
Ex
xt
te
en
ns
si
io
on
n ................................................................................................................................. 18
C
Ca
as
se
e
S
St
tu
ud
dy
y:
: ..................................................................................................................................... 20
T
TM
MC
C-
-1
1
S
So
of
ft
tw
wa
ar
re
e
U
Up
pd
da
at
te
e................................................................................................................. 21
nstalling the D-Mon Option.................................................................................................... 21
T
TM
MC
C-
-1
1
F
Fa
au
ul
lt
t
F
Fi
in
nd
di
in
ng
g ........................................................................................................................ 22
C
CB
B
E
El
le
ec
ct
tr
ro
on
ni
ic
cs
s ................................................................................................................................. 23

TMC1-DMon Monitor Controller
2016 CB Electronics 4 Version 1.0
T
Tr
ri
in
nn
no
ov
v
D
D-
-M
Mo
on
n
TMC-1-DMon User guide
This document only describes the Ethernet connections of the TMC-1 and any differences in
operation. Please refer to the TMC-1 Reference which is available from the TMC-1-DMon
Web Page.
http://www.colinbroad.com/cbsoft/tmc1/tmc1dmon.html
Ethernet Connection
The TMC-1 communicates to the D-Mon via Ethernet, when connected to the network it will
discover any connected D-Mon’s and display them. f it has been paired with a D-Mon and
recognised the Serial number it will select the paired D-Mon.
To check the Ethernet connection depress [Select] and [Page] together to enable the Page
select menu. From the Page select menu depress the [E-Net] key to display the D-Mon
pages. Use the [<] and [>] keys to step through.
Note 1: The current version of the D-Mon software does not support discovery on different
sub-nets, the D-Mon and TMC-1 must be on the same subnet address. You can set the TMC-1
P Address using Midiupd or TMC-1-mac/win programs.
Note 2: The TMC-1 now supports DHCP, the default P of the TMC-1 is 169.254.149.250. f not
using a DHCP Server you can change the P Address of the TMC-1 using the TMC-1 or
Midiupd Mac/Windows programs.
Note 3: The D-Mon serial number is unique to each unit and is used to define the destination
instead of the P address.

TMC1-DMon Monitor Controller
2016 CB Electronics 5 Version 1.0
Setting the TMC-1 IP Address from the TMC-1-win/mac program

TMC1-DMon Monitor Controller
2016 CB Electronics 6 Version 1.0
D-Mon Engineer Headphone Source Selection
The engineers Headphone output allows the engineer to monitor different inputs and outputs
without disturbing the main monitor output.
The [PH Source] user key is used to access the headphone source selection page. Currently
two pages are available with a [More] key to switch between the pages.
The following user keys are provided for the D-Mon Headphone feed
[Ph Follow]: Headphones follow output selection – also available on phones source page
[Phones]: Headphone Enable, hold down and use knob to adjust gain
[PFL->Ph]: Route AFL/PFL to Phones
[Ph Source]: Access the Phones source selection page, hold down and use knob to adjust
gain.
D-Mon Inputs
The D-Mon does not differentiate between nputs and Cue inputs, the TMC-1 will assume that
the last 3 inputs are Cue inputs 1, 2 and 3 and can be sent to the cue outputs.
D-Mon Dim
The TMC-1 reads the D-Mon “Auto-Dim on Talkback” Option and determines the Dim as
follows
f Set: the fixed 20dB D-Mon Dim is used
f not Set: the programmable TMC-1 Dim is used

TMC1-DMon Monitor Controller
2016 CB Electronics 7 Version 1.0
D-Mon 4.1 Implementation
The TMC-1-DMon and D-Mon are both new, not everything is implemented at this time,
currently the TMC-1 can control anything that is available on the D-Mon Web interface.
Function Details Connection/Notes
Metering metering is available from the
D-Mon 4.1.2
nput and output names TMC-1 reads names from D-Mon and displays the first 7
characters
Control Room Gain Control
1 dB steps Control from both web page
and TMC-1
Dim The Dim action is set by the
Trinnov “Auto-Dim on
Talkback” flag (TMC-1 Talk Dim
Key), when enabled the
Trinnov dim is used, when not
enabled the TMC-1 dim is used
Control from web page or
TMC-1
Variable Dim available from
TMC-1
20dB Dim fixed on D-Mon,
Mute Control from both web page and TMC-1
Cal-A, Cal-B ndependent on web page and TMC-1
Source Selection 6 inputs Main, Alt, nputs 1-4 Control from both web page
and TMC-1
Source Summing Maximum of 5 inputs on
D-Mon-6 and D-Mon-8
Control from both web page
and TMC-1
Speakers Selection Up to 4 Sets –Default 3 Sets
Main, Alt, Mini
Control from both web page
and TMC-1
Speaker naming The TMC-1 reads the fist 7 characters of the speaker name
from the D-Mon
Cue nputs The TMC-1 will select the last 3 inputsas Cue in 1, Cue in 2, Cue
in 3. The TMC-1 reads the names from D-Mon

TMC1-DMon Monitor Controller
2016 CB Electronics 8 Version 1.0
Cue outputs Define on the D-mon, the TMC-1 can control up to 4 cue sends
and will read the first 7 characters of the name
Cue output source
selection
Link to Control room source, Cue in 1, Cue in 2, Cue in 3, T/B 1,
T/B 2
Talkback nput nternal and External T/B Mic’s
can be defined
Routing controlled from TMC-
1 only displayed on D-Mon
web page. Gain control from
both web page and TMC-1
Listen nput One input only Control from both web page
and TMC-1. Gain control
from both web page and
TMC-1
Bass management Use the [Bass-X] user key on the
TMC-1
Control from both web page
and TMC-1.
LFE +10dB Use the [LFE+10] user key on
the TMC-1
Control from both web page
and TMC-1.
Alt nput nsert Both [Alt Active] and [Alt enable] implemented as user keys on
TMC-1
D-Mon Phones O/P [Phones], [Ph Gain],
[Ph Source] and [Ph Follow]
from TMC-1 as user keys
Controlled from both web
page and TMC-1
AFL Gain and Switching ,
Mono, Stereo, 5.1 implemented as user keys on TMC-1
ndividual Speaker Trims Disabled in TMC-1, ncluded in
D-Mon Speaker correction
nput Trims mplement by changing main
output gain
Listen back 2 input Not implemented in D-Mon

TMC1-DMon Monitor Controller
2016 CB Electronics 9 Version 1.0
D-Mon E-Net Pages
Discovery
This page displays the D-Mon units
discovered by the TMC-1 (Max 4). The unit
highlighted in Yellow is the currently
connected unit. To select, use the [<] and
[>] keys and then depress the [Select] key.
Network Page:
This Page shows the current setup of the
Network connection. The TMC-1 copies
the subnet address from the selected D-
Mon on the Discovery page, the last
number (249 in the image) may be
defined from the “TMC1-DMon” program
on Mac or Windows with the Unit Name.
Socket De ug:
Used to debug systems, You can change
the socket number using the [+] or [-] keys.
Socket 00 = Discovery and setup
Socket 01 = D-Mon Control
Socket 02 - Meters
Other D-Mon Pages

TMC1-DMon Monitor Controller
2016 CB Electronics 10 Version 1.0
Cue Sends Page:
[Enable] mute/unmute the selected
output.
[PFL] will root the selected cue output to
the current monitor output
[Link] with route the current control room
source to the selected cue output
Talkback routing must be specified on this
page
Depress the [Select] key to enable the
source selection and gain for the selected
cue output as shown in the lower picture.
Session Snapshots Page:
Studio Presets page:
Access using the [Preset] user key
Use [^] and [v] keys to select and then
enable using the [Apply] key.
Use the [More] key toswitch between
Session Snapshots and Studio presets
Phones Source Page
Access using the [Ph Source] key
Two pages with a [More]/[Less] key to
select between the pages
(Todo: Display the names from D-mon)
Inhaltsverzeichnis
Andere CB ELECTRONICS Controller Handbücher



















