CB ELECTRONICS TMC-1 Service-Handbuch
CB Electronics
TMC-1 Monitor Remote
Reference
Version 6.0
TMC-1 Reference Manual
C
CB
B
E
El
le
ec
ct
tr
ro
on
ni
ic
cs
s
CB Electronics has made every effort to ensure the accuracy of information contained within
this document, which is nevertheless supplied for information purposes only and does not
constitute any form of warranty or guarantee.
All trademarks acknowledged.
The information in this document is subject to change without notice.
The nformation in the manual is updated as the TMC-1 is improved, you can find the latest
version of the software on the product web page.
CB Electronics
Loddonside, Lands End House
Beggars Hill Road
Charvil
Berkshire RG10 0UD
Tel: +44 (0)118 9320345
Fax: +44 (0)118 9320346
Email: support@colinbroad.com
Tech Support: +44 (0)118 9320345
Web: www.colinbroad.com
TMC-1 Reference Manual
INTRODUCTION 1
CONNECTIONS 2
INSTALLATION 2
Power 3
Connecting to XMon or A-Mon 3
XMon to HD-15 Converter 4
RJ45 Breakout Box 4
Connecting to N P DAD AX/DX32, N P Penta or Avit M RX 4
Connecting to D-Mon 5
PFL/AFL from the Mixer/Workstation 5
Hard Ware Mute 5
Record/Play tallies for Auto Mute/Auto alkback/ alkback Resume 5
SETTING UP TMC-1 6
F
OR THE FIRST TIME OR AFTER
M
AJOR
S
OFTWARE
U
PDATE
6
Factory Default: 6
/B Gain 1 & 2 6
Listen Gain 1 & 2 6
AFL Gain 6
P
ROTECTED
/C
ALIBRATED
S
ETTINGS
7
NPUT AND OUTPUT TRIMS
8
Input rim: 8
Speaker rim: 8
Using MC-1v5 to adjust rims 10
Mono rim: 11
7.1, 5.1 and User rim: 11
Cal A/B rim: 12
Cal P 12
CALIBRATING THE SPL LISTENING LEVEL 13
Why is there no overall output level adjustment for the speaker sets? 13
Power Amplifier Input Pad 14
OPERATION 14
Meters Page: 15
Speaker Mute: 15
Speaker Solo Page: 15
Input Select with Sum Enabled 15
Cue Sends Page: 16
Cue Sends Page with Select Depressed 16
Cue Mutes 16
Select Page: 17
In/Out Preset 17
TMC-1 Reference Manual
Information display: Shown Below 18
FORMAT 18
Auto Mute Page 19
Auto alkback 20
User Keys, GPIO’s and Auto: 20
Setup Menu: 21
/B, L/B, AFL Page 21
TMC-1
C
ONTROLS
22
[Mute] Key: 22
[Dim] Key : 23
[Page] Key: 23
[Select] and [Ctrl] Keys: 23
[Select] Key: 23
[Ctrl] Key: 23
USER FUNCTION KEYS: 24
Display Keys [1] – [8] 25
[User]: 25
Function Keys: [Fn-1], [Fn-2], [Fn-3] 25
Function Keys - normal operation after factory Reset 25
Knob Push 25
USER KEY FUNCTION TABLE 25
U
SER
K
EYS
-C
OMMON TO
A
LL
26
TMC1-X
MON
O
NLY
30
TMC1-P
ENTA
O
NLY
30
TMC-1-DM
ON ONLY
32
TMC-1-AM
ON ONLY
33
Knob Push 33
Display Keys [1] – [8] 34
M
ETERS
P
AGE
35
User keys: [1], [2], [3], [4], [5], [6], [7], [8]: 35
U
SER
K
EY BANK
2 35
M
ETER
S
OURCE
36
TMC-1-XM
ON
M
ETER
S
OURCE
36
TMC-1-P
ENTA
M
ETER
S
OURCES
36
TMC-1-DM
ON
M
ETER
S
OURCE
36
TMC-1-AM
ON
M
ETER
S
OURCES
37
C
UE
S
ENDS
P
AGE
38
User keys: [1], [5], [6], [8]: 38
[ v ] and [ ^ ]: 38
[Enable]: 38
[PFL]: 38
[Select] 38
TMC-1 Reference Manual
Cue Sends Display with [Select] depressed 39
Speaker Mute and Solo pages 39
Speaker Select keys [1]-[8]: 39
NPUT
S
ELECT PAGE
40
Input Select keys [1]-[8]: 40
Input Select page with Sum Enabled 41
TALKBACK 41
Internal alkback and Listen-back Latching 42
MC-1 Internal/External Microphone Gain adjust 42
XMon alkback: 42
Penta alkback: 42
Internal/External alkback and Listen-back Latching [1] and [6] 42
MC-1 Internal Microphone Gain adjust 42
MC-1 External Microphone Gain adjust 42
Auto- /B & Auto Mute 43
ENGINEER HEADPHONE SOURCE SELECTION 44
SYSTEM SETUP 45
Setup Menu: 45
Menu 01 – Meter Order 45
Menu 02 – alkback Latch Enable 45
Menu 3 – F Brightness 46
Menu 4 – op Display 46
Menu 5 – HUI AFL 46
Menu 6 – Mute Monitors when Listen Active 46
Menu 7 – Cue Output when alkback Active 47
Menu 8 – Level Display ype 47
Menu 9 alkback keys when Record Active 47
Menu 10 – Cal A / Cal B/Cal P Lock 47
Menu 11 – A / B Switch Lock 47
Menu 12 – Listen Speaker Output Assign 48
TMC-1-PENTA: LISTEN1 IS SENT TO LEFT AND LISTEN 2 IS SENT TO
RIGHT ADVANCED SETUP 48
ADVANCED SETUP 4
Adv Menu 01 – Lock/Un-Lock User Keys 49
Adv Menu 02 – Calibration Mode Enable 49
Adv Menu 03– SPL/Dolby Display for 0dB Gain 49
Adv Menu 04– External /B Dim 50
Adv Menu 05 – Volume Knob push switch Function 50
Adv Menu 06 – Page key function 51
Menu 07 – Select Key Off function 51
TMC-1 Reference Manual
Adv Menu 08 – Ctrl Key Off function 51
Adv Menu 09, 10, 11, 12, 13, 14 – GPI Inputs 51
he default function for GP4 in is Ext /B 2 52
Adv Menu 15 – AFL/PFL GPI Active level 53
Adv Menu 16 – GPI Record ally Active Level 53
Adv Menu 17 – GPI Play ally Active Level 53
Adv Menu 18 – GPO 1 Output Function 53
Adv Menu 19 – GPO 2 Output Function 53
Adv Menu 20 – GPO 3 Active High/Low 53
Adv Menu 21 – Maximum Gain 53
Adv Menu 22 – Factory Reset 54
TMC-1-XMON ONLY ADVANCED MENU’S 55
Adv Menu 23 – Alt Output Select 55
Adv Menu 24 – Communications 55
Adv Menu 25 – XPand Surround 55
TMC-1-PENTA ONLY ADVANCED MENU’S 55
Adv Menu 23 – Alt Output Select 55
Adv Menu 24 – Digital Headroom 56
Adv Menu 25 – Insert Makeup Gain 56
Adv Menu 22 –Set default Analogue Output level (On Menu Exit) 56
Adv Menu 27 – Write I/O Names o Penta / DAD AX/DX32 58
Adv Menu 28 – Reset Penta / DAD AX/DX32 to Defaults on Menu Exit 58
TMC-1-DMON ONLY ADVANCED MENU’S 5
Adv Menu 23 – Digital Headroom 59
Adv Menu 24 – Define Cue Mix Using 59
TMC-1-AMON ONLY ADVANCED MENU’S 60
Adv Menu 23 – Alt Output Select 60
Adv Menu 24 – Centre Speaker Fitted? 60
Adv Menu 25 – LFE Speaker Fitted? 60
Adv Menu 26 – Rear Surround Speakers Fitted 60
Adv Menu 27 – Communications 61
Adv Menu 28 – XPand Surround 61
GPIO 62
GPO Open Collector Outputs 63
Connecting a lamp to a Open collector outputs 63
Connecting a LED to a Open Collector Output 63
GPI Inputs 65
C
ONNECTING A SWITCH TO A
GP
NPUT
65
C
ONNECTING TO THE
A
VID
S6 65
C
ONNECTING TO THE
A
VID
S
YNC
O 66
TMC-1 Reference Manual
T/B MIC I/P 66
USB PORT 67
P
OWER
67
C
ONFIGURATION
67
HU
E
MULATION
67
M D
T
IMECODE
67
F
IRMWARE
U
PDATES
67
R
ECOVERY
68
NETWORK PORT 6
DHCP 69
OSC
(O
PEN
S
OUND
C
ONTROL
) 70
User Keys 70
OSC Slave O/P 72
OSC WiFi Connections 72
SETTING THE TMC-1 USER KEY FUNCTIONS 75
S
ETTING THE
NPUT
,
O
UTPUT
,
S
PEAKER
,
M
ETER AND
U
SER
N
AMES
75
PRESETS 76
TMC-1 INTERNAL CONNECTIONS 7
Corrected XMon 15 pin Connections 80
TALKBACK &HEADPHONES CONNECTOR (XMON)TMC-1 HD15 (VGA)
CONNECTOR 80
TMC-1 HD15 (VGA) CONNECTOR 81
C
ONNECTING A
A
VID
CON
C
ONSOLE TO THE
MTRX/D
AD
AX32/NTP
P
ENTA
82
TMC-1-XM
ON
/A-M
ON
RJ45
B
REAKOUT
B
OX
83
C
ONNECTING THE
TMC-1
H
EADPHONES AND
T
ALKBACK
M
ICROPHONE TO THE
DAD
A
X
32,
NTP
P
ENTA
720
AND
A
VID
MTRX 84
S
INGLE
M
INI
S
PEAKER
85
GLOSSARY 85
CUSTOMER QUESTIONS 86
TMC-1 Monitor Controller Introduction
14 September 2018 CB Electronics 1 Version 6.0
I
In
nt
tr
ro
od
du
uc
ct
ti
io
on
n
The TMC-1 Monitor Controller is supplied with different software to suit the system controlled,
TMC-1-XMon, TMC-1-Penta, TMC-1-DMon, TMC-1-AMon and TMC-1-Remote
•Connects to Avid XMon via 1 pin ‘D’ connector.
•Connects Trinnov D-Mon via Ethernet. Use the TMC-1-DMon Manual
with this manual
•Connects to DAD AX32/NTP Penta via Ethernet. Use the TMC-1-
Penta Manual with this manual
•Connects to A-Mon via HD1 and DCC VGA Cable
•Protected calibration settings
•Internal Talkback Microphone
•Play tally from Play GP Input, MTC, HUI or LTC
•Record/Red Light GP Input/Output
•Record Tally from Record GP Input or HUI
•Auto-Mute Main LS, Studio LS, Talkback and Listen Back
programmable from Play and Record GPI or HUI
•Before, During and After automation of Studio L/S and Headphone
Output.
•Two separate talkback destinations
•Dual Calibration Settings By default 8 and 80 SPL
•Dedicated speaker solo/mute keys.
•GPIO for Talkback, Listenback, PFL/AFL
•Stem Input mixing with Mute and Solo
•A/B Input selection
This guide will introduce the TMC-1 with examples and illustrations
Further information and software upgrade and x-mon, d-mon, penta, amon version
information can be found at
www.colinbroad.com/cbsoft/tmc1/tmc1.html for tmc-1-xmon
www.colinbroad.com/cbsoft/tmc1/tmc1penta.html for tmc-1-penta
www.colinbroad.com/cbsoft/tmc1/tmc1dmon.html for tmc-1-dmon
www.colinbroad.com/cbsoft/amon/amon.html for tmc-1-amon
Features
TMC-1 Reference Manual
14 September 2018 CB Electronics 2 Version 6.0
C
Co
on
nn
ne
ec
ct
ti
io
on
ns
s
The TMC-1 has six connectors on the rear as follows
•HD1 female: XMon connection including RS-422 or MIDI, Headphone, and Talkback
Microphone.
•USB: Used for Power and if connected to a DAW, can be used with MTC or HUI for
auto talkback and Timecode Display.
•¼” Jack: Headphone Cue monitor connection to X-Mon via 1 pin ‘D’.
•1 pin ‘D’ Male: GPIO in/out – Talkback 1 and 2 Enable/Selection, PFL/AFL enable,
H/W Mute output, LTC input, Play Input, Rec/Red light in/out.
•3. mm Jack: Electret Microphone input (Laptop Mic)
•RJ4 : Ethernet: Network connection
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
The TMC-1 is designed as a desktop unit but may be mounted flush with the desktop. The
unit should be sited in any convenient position away from sources of moisture or excessive
heat. The TFT display brightness may be adjusted via the Setup menu to optimise viewing
under different lighting conditions.
TMC-1 Reference Manual
14 September 2018 CB Electronics 3 Version 6.0
TMC-1 and TMC-1-S6 , TMC-1 Rear view with Ethernet and T/B Mic Input
Power
Power the TMC-1 via the USB cable supplied. The TMC-1 may be powered directly from the
USB power supply included or connected directly to the DAW.
Connecting to XMon or A-Mon
The HD1 Female on the rear can be connected to the A-Mon with a DDC VGA cable, a
Conversion box is supplied to connect to the XMon.
Andere Handbücher für TMC-1
3
Inhaltsverzeichnis
