CDA SC223SS Kurzanleitung
www.cda.eu
SC223SS
Single oven
Installation, use and maintenance
2
Contents:
3 Important information
5 Safety instructions
6 First use of the oven
7 Oven controls, functions and use
10 Electronic programmer/timer
10 Setting the current time
10 Minute minder function
11 Semi-automatic cooking
12 Automatic cooking
14 Cleaning and maintenance
15 Removing the appliance door
16 Replacing the appliance door
17 Removing the inner door glass
19 Removing the shelf supports
20 Changing the oven light bulb
21 Installation
23 Mains electrical connection
25 Troubleshooting
26 Important notes on the oven timer/programmer
27 Energy Eciency Information
IMPORTANT: Please read the user instructions carefully before
using the appliance for the first time and before installing it.
Failure to install the oven, or to have it installed, as per the user
manual could invalidate the warranty. Any service calls relating to
misuse or incorrect installation could incur a service charge.
3
Important
This appliance must only be used for the purpose for which it is
intended, i.e. domestic cooking. Any other use could be dangerous
and may lead to premature failure of the appliance.
The CDA Group Ltd cannot be held responsible for injuries or losses
caused by incorrect use or installation of this product. Please note that
CDA reserve the right to invalidate the guarantee supplied with this
product following incorrect installation or misuse of the appliance.
Under no circumstances should any external covers be removed for
servicing or maintenance except by suitably qualified personnel.
User information:
• Ovens become hot during and immediately after use.
•The oven door can become very hot during operation.
•After use, please ensure that the oven switches are in the ‘O’
position.
•Keep children away from the appliance when in use, and
immediately after use.
•Do not allow children to play with or on the appliance.
•Keep the oven door closed whilst grilling.
Appliance information:
Please enter the details from the appliance rating plate on to the
following page for reference, to assist CDA Customer Care in the
event of a fault with your appliance and to register your appliance for
guarantee purposes.
4
Appliance Model
Serial Number
EU Declarations of Conformity:
This oven has been designed, constructed and marketed in
compliance with safety requirements of EU Directive 2014/35/EU (Low
voltage) and requirements of EU Directive 2014/30/EU.
This appliance has been manufactured to the strictest standards and
complies with all applicable legislation, including Electrical safety (LVD)
and Electromagnetic interference compatibility (EMC). Parts intended
to come into contact with food conform to 1935/2004/EC.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU.
At the end of its working life, the product must not be disposed
of as urban waste. It must be taken to a special local authority
dierentiated waste collection centre or to a dealer providing this
service.
Disposing of a household appliance separately avoids possible
negative consequences for the environment and health deriving from
inappropriate disposal and enables the constituent materials to be
recovered to obtain significant savings in energy and resources. As a
reminder of the need to dispose of household appliances separately,
the product is marked with a crossed-out wheeled dustbin.
5
Important
• Read the user instructions carefully before using the oven
for the first time.
• Follow the instructions for first use of the oven.
•Clean the oven regularly.
•Remove spills as soon as they occur.
•Always use oven gloves when removing shelves and trays
from the ovens.
•Do not allow children near the oven when in use.
•Do not allow fat or oils to build up on the oven shelves, grill
pan or oven base.
•Do not place any cooking utensils or plates directly on the
oven base.
•Always grill with the oven door closed.
•Do not grill food containing fat without using the grill pan
grid.
•Do not cover the grill pan grid or the oven walls with
aluminium foil.
•Do not use the oven tray for roasting.
•Do not perform maintenance or cleaning of the oven
without first switching o the electricity supply. If the oven
has recently been used, allow to cool.
•Do not place hot enamel parts in water. Leave them to
cool first.
•Do not allow vinegar, coee, milk, saltwater, lemon or
tomato juice to remain in contact with enamel parts.
•Do not use abrasive cleaners or powders that will scratch
the surface of the enamel.
•Do not attempt to repair the internal workings of your oven.
6
First use of the oven
First use
•The metal casing of this appliance has been coated with a
preservative to protect it during transport and storage. This should
be removed during installation by using a non-abrasive stainless
steel cleaner. Always follow the instructions given with the cleaner
being used.
•Before using the oven for the first time we recommend that you
clean the oven with soapy water, rinse carefully. Set the current
time on the programmer as per page 10. Heat on each of the
below programmes at maximum temperature for the specified time.
A slightly unpleasant smell may be produced, caused by grease
remaining on the oven elements from the production process.
15 minutes full grill 30 minutes fan oven
Please note:
•This oven has been fitted with a cooling fan to achieve maximum
eciency and to maintain low surface temperatures. The cooling
fan will switch on automatically when the oven switches on. It is
normal for the cooling fan to run for an hour or more after use,
depending on the duration, temperature and type of cooking
programme used.
IMPORTANT: The fanned grill must only be used to a maximum
temperature of 190°C
7
Oven controls and use
IMPORTANT: You must set the current time on the oven
programmer, as per page 10, for the oven to operate properly.
Cooking function knob (E)
To set the function, turn the cooking function knob (E in Fig. 1) to the
required function. You will need to set a temperature on all functions
except the light and defrost functions. The neon indicator next to
the temperature knob will extinguish when the temperature has been
reached.
Each of the oven functions uses dierent elements within the oven to
oer you the best choice of cooking every time. These are explained
below and on the following two pages:
Fan oven
This function uses the circular heating element with a
temperature between 50°C and 250°C. The fan then
circulates the hot air which helps to achieve uniform
heat distribution.
Fig. 1 A E
BCD
F
8
Eco fan oven
This function provides the most ecomonical method for
cooking food. It is similar in operation to the fan oven
function mentioned previously. However, cooking times
may be longer.
Defrost
This function uses the fan to circulate air, at ambient
temperature, within the oven which helps to accelerate
the defrosting process.
Half Grill
This function radiates the heat from the grill element.
This fully temperature variable grill can be set between
50°C and 250°C maximum.
Full Grill
This function radiates the heat from the grill element
and the top element.
This fully temperature variable grill is ideal for grilling a
full family meal. It can be set between 50°C and
250°C maximum.
When grilling, please note:
• Always grill with the oven door closed.
• Put the grill pan as close to the grill as possible.
• Do not grill for more than 30 minutes at a time.
• Preheat the grill for up to five minutes with the
oven door closed.
9
Fanned Grill
This function radiates the heat from the grill element and
the top element but also uses the fan to circulate the
hot air. The hot air is distributed over and under the food
that you are grilling.
This fully temperature variable grill is ideal for grilling
fish or other items whose appearance can be spoiled by
a normal grill function.
It can be set between 50°C and 190°C maximum.
When fan grilling, please note:
• Always grill with the oven door closed.
• The grill pan does not need to be as close to the
grill as possible.
• Do not grill for more than 30 minutes at a time.
• Preheat the grill for up to five minutes with the
oven door closed.
Light
This turns on the light within the oven.
Temperature knob (A)
•To set the temperature, turn the temperature knob clockwise to the
required temperature.
•Once the oven has reached the required temperature, the
temperature indicator lamp on the control panel will switch o.
•The temperature indicator lamp will light up when the oven
elements are in operation.
10
Electronic programmer/timer
This oven’s electronic timer is equipped with touch control sensors.
Each registered touch of a sensor field is confirmed by a single beep.
It is advisable to keep the sensor fields clean at all times.
Setting the current time
After connection to the mains supply, or reconnection after a power
outage, the display will show ‘0.00’ and the display will flash.
•Press the < and > sensors simultaneously until the symbol
shows on the display and the dot below flashes. You have
approximately 7 seconds to set the time using the < and > sensors.
Wait approximately 7 seconds and the time should be set.
•The time can be amended at any time by following these steps.
Please note: The time must be set for the oven to work.
Setting the minute minder function
The minute minder function can be set at any time, regardless of the
state of activity of the oven. The minute minder can be set anywhere
from 1 minute to 23 hours and 59 minutes.
•Press the menu sensor until the display shows the flashing ( )
symbol.
•Set the desired duration of the minute minder using the timer
left and right sensors. After an approximately 7 second wait, the
minute minder will be set and the ( ) symbol will be solidly lit. The
minute minder duration will be shown on the timer display.
•Press and hold any of the three sensors in order to deactivate
Inhaltsverzeichnis
Andere CDA Ofen Handbücher
CDA
CDA SL570BL Benutzerhandbuch
CDA
CDA DV1180 Series Referenzhandbuch
CDA
CDA DC730 Series Referenzhandbuch
CDA
CDA SC309 Series Referenzhandbuch
CDA
CDA SK110 Kurzanleitung
CDA
CDA SC145 for Referenzhandbuch
CDA
CDA SK510 Single Kurzanleitung
CDA
CDA 9Q6 Series Referenzhandbuch
CDA
CDA SL200BL Benutzerhandbuch
CDA
CDA VM452 Technisches Datenblatt
CDA
CDA SV 210 for Referenzhandbuch
CDA
CDA rv961 Referenzhandbuch
CDA
CDA SL400SS Benutzerhandbuch
CDA
CDA SV410 for Referenzhandbuch
CDA
CDA RV 1000 Series Bedienungsanleitung
CDA
CDA SK700 Montage- und Bedienungsanleitung
CDA
CDA SVA 100 PP Referenzhandbuch
CDA
CDA SK511 Kurzanleitung
CDA
CDA CD 307 Betriebsanleitung
CDA
CDA SC211 Referenzhandbuch
