CDVI CDV91F Bedienungsanleitung

2 -Wire Intercom System

DT-ENG-603F-V1 20141108

CDV91/92FSeries User Manual

CDV91FCDV92DF

-1-

1.Parts and Functions

110 mm

188 mm

Camera Lens

Speaker

Nameplate

Call Button

Microphone

Night Light

Side View Mounting box

2.Terminal Descriptions

1 2 3

JP/LK

S+ S-

Main Connect Port

BUS

-2-

•JP/LK: Lock control jumper, to select the lock type(see 5.2.1 , 5.2.2).

•Main Connect Port: To connect the bus line and the electronic locks.

•BUS: Connect to the bus line, no polarity.

•PL: External lock power input, connect to the power positive(power +).

•S+: Lock power(+) output.

•S-: Lock power(-) output, connect to the power(-) input of locks(only when using the camera to

power the locks, if using the external power supply for the locks, the S- will not be connected).

3.Specications

•Power Supply : DC 24V;

•Lock Power supply: 12Vdc, 300mA(Internal Power);

•Power Consumtion: Standby 33mA; Working status 110mA;

•Camera: Color ARS; 650 TV Lines;

•Unlocking time: 1~30s(Default 1s);

•Working temperature: -15ºC ~ 55ºC;

•Dimension: 188(H)×110(W)×39(D)mm.

4.Mounting

4.1 Mounting

1 2

Drill a hole in the wall to match the size of the

mounting box and attach to the wall.

Attach the panel to the mounting box and

use screws supplied to fix the panel

Connect the cable correctly

-3-

4.2 Placing Name Label

STEP 2

Replace name label.

Name label.

5.1 Basic Connection

5.System Wiring and Connections

BUS(IM) BUS(DS)

PC6

AC~

L1 L2 PL S+ S-

Doorbell Button

Switch

1 2 3

DIPS

From the rear of the metal section of the CDV91/92 unclip the plastic cover to open

the transparent name plate, insert a name label and replace the plastic cover.

STEP 1

Remove the screws.

-4-

5.2 Electric Lock Connection

5.2.1 Door Lock Controlled with Internal Power

Note:

1. Electronic lock of Power-on-to-unlock

type should be used.

2. The door lock is limited to 12V, and

holding current must be less than 250mA.

3. The door lock control is not timed from

Exit Button(EB).

4. The Unlock Mode Parameter of Monitor

must be set to 0 (by default).

LOCK

PL S+S-

1 2 3

BUS

1 2 3

5.2.2 Door Lock Controlled with Dry Contact

Note:

3. Setup the Unlock Mode of Monitor

for different lock types.

LOCK

Take off the Jumper

POWER

SUPPLY

BUS PL S+S-

1. The external power supply must be

used accordance to the lock current.

2. The jumper must be removed

before connecting.

•Power-on-to-unlock(fail secure):Unlock Mode=0 (by default)

•Power-off-to-unlock(fail safe):Unlock Mode=1

5. When it connected to a fail secure electronic

lock,set the jumper position to 2-3.

6. When it connected to a fail safe lock,

set the jumper position to 1-2.

For connection to a fail secure lock, the jumper

position is 2-3.

For connection to a fail safe lock, jumper

position is1-2.

-5-

5.2.3 Unlock parameter setting(set on monitor)

1.Touch icon on

main menu page.

2.Touch UNLOCK

button and hold for 2s.

3.A digital keypad will

be shown.

About

Local Address 00.00

Video Standard AUTO

System Verson 00.01.00

Display Driver 1.0

Front 1.0

UI 1.0

INSTALLER SETUP 123

5.3 Multi Doorstations Connection

100~240VAC

DBC4A

A B C D

OFF

Impedance

switch

L1 L2 PL S+ S- L1 L2 PL S+ S- L1 L2 PL S+ S- L1 L2 PL S+ S-

1# Camera2# Camera3# Camera4# Camera

(Device Address:3) (Device Address:2) (Device Address:1) (Device Address:0)

BUS(IM) BUS(DS)

PC6

AC~

Note:

1. CDV91/91SF correctly before setting.

2. Set on one monitor only as parameters will be saved in the CDV91/92SF automatically.

3. DT47M monitor shown for example, please refer to the corresponding user manual of the

monitor in use..

-6-

5.4.1 Basic IN-OUT Wiring Mode

5.4 Multi Monitors Connection

Code=30Code=31

(Device Address:0)

BUS(IM) BUS(DS)

PC6

AC~

100~240VAC

Code=0

NOTE: DT47M monitor shown.

-7-

5.4.2 With DBC4A Wiring Mode

Code=0

OFF ON

DBC4A

A B C D

DBC4A

A B C D

Impedance

switch

Impedance

switch

(Device Address:0)

100~240VAC

BUS(IM) BUS(DS)

PC6

AC~

Code=2

Code=1

Code=3

Code=28

Code=30

Code=29

Code=31

NOTE: DT47M monitor shown.

-8-

6.1 ID of Doorstation Settings

The ID of doorstation can be set to ID0/ID1/ID2/ID3.The default is ID0.

background indicator Buzzer

beep+,beep beep+,

(off)

beep one

(ash one)ID0:

beep twice

ID1:

beep 3 times

ID2:

beep 4 times

ID3:

(ash twice)

(ash 3 times)

(ash 4 times)

(ash)

background indicator Buzzer

6. Setup

Note: Monitor call button A calls user codesfrom 0 to 15 and

button B calls user codesfrom 16 to 31. Please set monitor user

codes (addresses) accordingly.

1)Power-on & within 5 seconds;

2)Press and hold "B" button for 3

seconds, to enter programming

mode.

Press and hold "A" and "B"

button for 3 seconds at the same

time to enter ID setting mode.

Press 'B' button to cycle

through the ID codes

ID0 ID1 ID2 ID3.

-9-

6.2 Unlock Time Settings

The unlock time can be set to 1~30 seconds. The default is 1s.

background indicator Buzzer

beep+,beep beep+,

(off)

(ash)

background indicator Buzzer

beep once

per second

(ash once per second)

background indicator Buzzer

1)Power-on & within 5 seconds;

2)Press and hold "B" button for 3

seconds to enter programming

mode.

Press and hold "A" button for 3

seconds to enter Unlock Time

setting mode.

Press and hold "B" button,t iming

starts; release "B" button to end

the timing. The time of press and

hold "B" button equal to unlock

time.(Timing Unit: 1s)

Note: In all steps, if there isn’t any operation within 5s, or press Call button, it will exit the setting.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CDVI Gegensprechanlage Handbücher

CDVI

CDVI DMR18S Bedienungsanleitung

CDVI

CDVI 2EASY CDV-47DX Bedienungsanleitung

CDVI

CDVI CD97-4ID Bedienungsanleitung

CDVI

CDVI CDV4796KP-DX Bedienungsanleitung

CDVI

CDVI CDV4791S-DX Bedienungsanleitung

CDVI

CDVI 2EASY CDV-91S Bedienungsanleitung

CDVI

CDVI 2EASY CDV-96KP Bedienungsanleitung

CDVI

CDVI CDV-DDP-F Bedienungsanleitung

CDVI

CDVI CDV-91 Bedienungsanleitung

CDVI

CDVI 2EASY CDV-T5 Bedienungsanleitung

CDVI

CDVI CDV96KP Bedienungsanleitung

CDVI

CDVI CDV-91 Bedienungsanleitung

CDVI

CDVI CDV91S Bedienungsanleitung

CDVI

CDVI CDV-17HFA Bedienungsanleitung

CDVI

CDVI CDV-471IP Bedienungsanleitung

CDVI

CDVI CDV-4791S-DXB Bedienungsanleitung

CDVI

CDVI CDV-DDP Bedienungsanleitung

CDVI

CDVI CDV-91IP Bedienungsanleitung

CDVI

CDVI CDV97-1ID Bedienungsanleitung

CDVI

CDVI CDV97-8ID Series Bedienungsanleitung

CDVI

CDVI CDV4791 Bedienungsanleitung

CDVI

CDVI 2Easy CDV4796KP-DX Bedienungsanleitung

CDVI

CDVI CDV96KP Bedienungsanleitung

CDVI

CDVI 2EASY CDV-850IP Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung