Celestron TRAILSEEKER CELE-82050 Bedienungsanleitung

TRIPOD | TRÉPIED

TRÍPODE | STATIV | TREPPIEDE

TRIPOD | TRÉPIED

TRÍPODE | STATIV

ENGLISH ..................................2

FRANÇAIS................................12

ESPAÑOL .................................22

DEUTSCH.................................32

ITALIANO ..................................42

2 IENGLISH

Thank you for purchasing your Celestron TrailSeeker Tripod. This tripod will provide you with years

of enjoyment and faithful service. Before using your tripod for the ﬁrst time, read these instructions

carefully to ensure proper use and care.

celestron®trailseeker tripod

Fluid Pan Head

Bubble Level Quick Release Plate

QR Plate Lock Lever

Pan Tilt Handle

Leg Angle Adjustment Latch

Padded Leg Wraps (2)

Pan/Tilt Tension Knob

Aluminum Legs

Center Column

Center Column Lock Knob

Set Screws (3)

Balance Hook

Leg Lock Levers

Rubber Feet

Carry Case

Hex Keys

Fig. 1

ENGLISH I3

The ﬂuid pan head of the TrailSeeker tripod

has a single control for adjusting both

horizontal and vertical movement. To pan or

tilt the tripod, loosen the pan/tilt tension knob

and move to the desired position using the

pan/tilt handle. Once the tripod is in position,

tighten the tension knob to secure.

The TrailSeeker tripod will provide you with a stable platform for your spotting scope, binocular or

camera in the ﬁeld. With four leg sections, three leg angles and an adjustable center column, the

tripod can be set in multiple conﬁgurations to get the exact height or stance needed for your terrain

and conditions. The TrailSeeker is the perfect tripod for any outdoor excursion from bird watching to

stargazing and everything in between.

Using YoUr tripod

adjUsting the FlUid pan head

Pan Tilt Handle

Pan/Tilt Tension Knob

Fig. 2

4 IENGLISH

The quick release plate allows you to quickly

attach your optics to the tripod. To remove the

quick release plate from the ﬂuid pan head,

push the lock lever to the left until it locks.

Attach the quick release plate to any device or

optic with a ¼”-20 mount thread by placing the

front of the quick release plate into the head.

Next, slide the plate into place. When the plate

is fully seated, press down. The lock lever will

automatically lock the plate into place.

QUick release plate

Quick Release Plate

Lock Lever

Fig. 3

ENGLISH I5

The center column of the TrailSeeker tripod

can be extended to raise the tripod head when

additional height is needed. To extend the

center column, loosen the lock knob and move

the center column to the desired height. Once

the head is in place, tighten the lock knob to

secure.

adjUsting the center colUmn

Center Column

Lock Knob

Center Column

adjUsting the leg length

The length of each leg section of the

TrailSeeker tripod can be adjusted. To adjust

the length of a leg section, release the leg lock

lever and extend the leg section to the desired

height. Press the leg lock lever back into

position to secure it. Repeat the process for all

leg sections. The legs will extend to a maximum

of four sections.

Leg Lock Levers

Fig. 4

Fig. 5

6 IENGLISH

adjUsting the leg angle

The legs of the TrailSeeker tripod can be set

at three different angles. To change the angle,

slightly push the leg in towards the center

column and pull out the leg angle adjustment

latch. Pivot the leg outward until it reaches

the end of its travel to obtain the widest angle

setting.

To use the middle setting, start at the widest

angle setting and slowly push the leg inward

while pressing on the leg angle adjustment

latch. When the middle angle setting is reached

the latch will depress and lock into place,

preventing it from pivoting outward.

To return to the standard leg angle, continue to

push the leg inward while pressing on the leg

angle adjustment latch until it locks into place.

The angle of each leg can be set independently

of the other two legs.

Note: The leg angle adjustment latch only prevents the legs from pivoting

outward. The tripod legs can always be pushed inward regardless of the

position of the adjustment latch.

Leg Angle Adjustment Latch

Fig. 6

ENGLISH I7

Balance hook

BUBBle levels

The balance hook on the TrailSeeker tripod

can be used to provide added stability in windy

conditions. To keep the balance hook out of

the way, it is retracted into the bottom of the

center column with a spring mechanism that

can easily be pulled out when needed. To

use the balance hook, pull it down from the

center column. Hang a heavy object, such as a

backpack, from the hook.

To ensure that the tripod legs and pan head are

level, reference either of the two bubble levels

on the TrailSeeker tripod.

Balance Hook

Bubble Levels

Fig. 8

Fig. 7

8 IENGLISH

removing the FlUid pan head

The TrailSeeker tripod ships with the ﬂuid pan

head attached to the tripod legs, but it can be

removed. The head of the tripod is threaded

onto the tripod legs and held in place with three

set screws. To remove the head, loosen the

set screws located under the center column

with the included hex key. With the pan/tilt

tension knob tightened, turn the tripod head

counterclockwise until it unthreads from the

center column.

Note: If the tripod head loosens from the tripod legs while panning,

tighten the set screws under the center column. Fig. 9

Inhaltsverzeichnis

Sprachen:

Andere Celestron Kamerazubehör Handbücher

Celestron

Celestron Regal Tripod Bedienungsanleitung

Celestron

Celestron StarSense AutoAlign 94006 Bedienungsanleitung

Celestron

Celestron ASTROMASTER 93610 Bedienungsanleitung

Celestron

Celestron Hummingbird Monopod Bedienungsanleitung

Celestron

Celestron Ultima Pan Tilt Head Tripod Bedienungsanleitung

Celestron

Celestron STARPOINTER 51630 Bedienungsanleitung

Celestron

Celestron Dew Shield DX Bedienungsanleitung

Celestron

Celestron 93606 Bedienungsanleitung

Celestron

Celestron 93606 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung