Celestron PowerSeeker 76 Bedienungsanleitung

Use the three tightening screws located at the

bottom of each leg to secure the extended legs

in place. All three legs should be the same

length to provide a level platform for the

telescope.

To set up the tripod, spread the legs outward

until they are fully extended and push down

center locking brace. Extend the center portion

of each of the three tripod legs down 6-8".

Quick Set-up Guide

123

Once the tripod legs have been extended, it

may be necessary to tighten the nuts at the

top of each leg so they are tight & secure.

Secure the tube to the mount using the two

threaded mounting bolts. Tighten to secure in

place.

Locate the optical tube and line up the tube

with the holes on the mount.

Insert the slow motion control rod into the

eyebolt attached to the altazimuth mount.

Secure slow motion control rod to telescope

tube by attaching the included bolt and

tightening.

PowerSeeker 76

Your PowerSeeker 76 includes: optical tube with

two threaded mounting bolts; tripod with center

support bracket & yolk mount attached; two

eyepieces; a 3x barlow lens, finderscope; slow

motion control rod; eyepiece accessory tray; multi-

tool (see step #7); The Sky™ CD software;

documentation including an owner’s manual.

Item# 21044

Place the accessory tray on top of tripod's

center leg brace. Thread the tray into the

threaded hole in the center of the leg brace.

Questions or Problems with Set-up?

CONTACT:

Celestron Technical Support: 310.803.5955

Quick Set-up Guide [cont]

Properly assembled, the tube should appear

as pictured above.

Locate the finderscope. Remove the knurled

nuts on the threaded posts at the focuser end

of the telescope tube.

Loosen the set screw on the focuser so that it

does not obstruct the inner diameter of the

focuser. Remove the plastic cap covering the

end of the focuser.

Locate the 20mm eyepiece and remove the

plastic covers. Insert the chrome barrel of the

eyepiece into the focuser and secure in place

by tightening the set screw.

Remove the lens cap from the front of the

telescope. To observe, look through the

eyepiece as shown above.

For additional magnification, you can use the

included 3x barlow. Place the barlow in the

focuser in place of the eyepiece and tighten

set screw -- remove the cap from the barlow.

Insert the chrome barrel of the 20mm

eyepiece into the barlow and tighten the set

screw to secure in place.

Orient the finderscope so that the larger lens is

facing towards the front of the tube. Place

finderscope over the posts on the tube and

replace knurled nuts.

For detailed usage

information please

consult your owner’s

manual.

Dieses Handbuch passt für folgende Modelle

Andere Celestron Teleskop Handbücher

Celestron

Celestron NexStar 60 Bedienungsanleitung

Celestron

Celestron 21063 Bedienungsanleitung

Celestron

Celestron 22014 Bedienungsanleitung

Celestron

Celestron CPC 925 Bedienungsanleitung

Celestron

Celestron 52222 Bedienungsanleitung

Celestron

Celestron Ultima 8 Bedienungsanleitung

Celestron

Celestron PowerSeeker 50AZ Bedienungsanleitung

Celestron

Celestron COMETRON 114AZ Bedienungsanleitung

Celestron

Celestron Ultima 52248 Bedienungsanleitung

Celestron

Celestron ASTRO FI 127 MAK Bedienungsanleitung

Celestron

Celestron CGE Pro 1100 Bedienungsanleitung

Celestron

Celestron 52212 Bedienungsanleitung

Celestron

Celestron 21056-K Bedienungsanleitung

Celestron

Celestron Ultima Series Bedienungsanleitung

Celestron

Celestron NexStar 8 Bedienungsanleitung

Celestron

Celestron NexStar 80SLT Bedienungsanleitung

Celestron

Celestron 22405 Bedienungsanleitung

Celestron

Celestron NEXSTAR 4 Bedienungsanleitung

Celestron

Celestron C11 Bedienungsanleitung

Celestron

Celestron PowerSeeker 60AZ Bedienungsanleitung

Celestron

Celestron FirstScope 90AZ Technisches Datenblatt

Celestron

Celestron FirstScope 114 Bedienungsanleitung

Celestron

Celestron FirstScope 114 Bedienungsanleitung

Celestron

Celestron Regal M2 Bedienungsanleitung

Beliebte Teleskop Handbücher anderer Marken

Meade

Meade 81005 Condor Bedienungsanleitung

Meade

Meade 114 EQ-DS Bedienungsanleitung

Meade

Meade LX200 CLASSIC Bedienungsanleitung

Leica

Leica 82 HD Bedienungsanleitung

EASTCOLIGHT

EASTCOLIGHT 9920 Bedienungsanleitung

zoomion

zoomion Genesis 200 EQ Bedienungsanleitung

TEC

TEC APO 140 Bedienungsanleitung

Orion

Orion 7832 Bedienungsanleitung

Carson

Carson Skelescope SK-100 Bedienungsanleitung

SKY-WATCHER

SKY-WATCHER VIRTUOSO Bedienungsanleitung

Orion

Orion EZ Finder 7228 Bedienungsanleitung

cassini

cassini C-JRS Bedienungsanleitung

nedis

nedis SCTE5060WT Bedienungsanleitung

Meade

Meade Polaris 60EQ-D Bedienungsanleitung

PlaneWave

PlaneWave CDK700 Bedienungsanleitung

William Optics

William Optics Synta Crayford Bedienungsanleitung

Orion

Orion FUNSCOPE Bedienungsanleitung

Levenhuk

Levenhuk Skyline Travel Bedienungsanleitung