1. Product Description
1.1 General
Introduction
Thank you for buying this Cello product, which is designed to give you many years of trouble-free
service.
You may already be familiar with using a similar unit, but please take time to read these
instructions. They are designed to familiarize you with the unit’s many features and to ensure you
get the very best from your purchase.
Safety is important
Your safety and the safety of others is important, Please therefore, ensure you read the “Safety
Instructions” before you operate this unit.
This display is a high performance display, it is controlled by MCU digital technology.
1.2 Contents
Please check all the following are in the Gift box before installing the product.
If any of the above items are missing, please contact the manufacture.
Important safety precautions
1.Please read all the instructions carefully before using this product.
2.Be sure to unplug when cleaning the LCD panel. Always clean with a special LCD panel cleaning
detergent.
3.Do not use accessories not authorised by the manufacture to prevent damage or risk of danger.
4.Do not disconnect the plug by pulling the power cable.
5.Do not use this display where it is likely to get wet, this to prevent damage or risk of danger.
6.The slits and openenings at the rear and bottom of the cabinet are there for ventilation to stop
componenents overheating. Do not block the vents with any type of soft materials such as a
blanket and place the monitor in a location with sufficient all round ventilation.
7. This display is equipped with a three pin power plug. The third pin is for the earth connection
and only applicable to sockets that are correctly earthed.
8. To prevent danger of electric shock do not remove the rear cabinet, all repairs should be done
by a qualified technician.
9. Place the display in a dry and well ventilated location.
a. Monitor including stand
b. HDMI cable
c. 12V / 4A Power pack
d. User manual
e. Warranty card
