Celsius PC53 Bedienungsanleitung

MODEL: CELSIUS PC53

INVERTER

PORTABLE AIR CONDITIONER

INSTRUCTIONS FOR USE

VERY IMPORTANT

Do not install or use your portable air conditioning unit

before carefully reading this instruction manual.

Please retain this manual for product warranty and future

reference

CAUTION

1." DO NOT BLOCK VENTILATION "! Please ensure the inlet and outlet ventilation is

not blocked.

2. Always operate this unit on a horizontal surface to avoid water leakage.

3. Do not operate this unit in a corrosive environment.

4. Operate this unit in an ambient of 32 degree centigrade or less when the unit is in

the cooling function. Contrarily, when the unit is in the heating function, the ambient

temperature is less 23 degree centigrade

5. Clean the air filter periodically to enjoy the most efficient cooling.

6. If you have turned the unit off, please wait at least 3 minutes before restarting.

This is to prevent any damage to the compressor.

7. This unit needs to be plugged into a 10 Amp power point. Please do not use

extension cords with this unit.

8. This unit is for indoor operation only.

9. Please ensure the adjustable air vent is open whilst in operation. The exhaust hose and

drain pipe must be extended to the closest window prior to use.

10. If the supply cord is damaged, it must be replaced by the manufacturer, service

agent or similarly qualified person.

11. The batteries from the remote control must be removed from the appliance

before it is scrapped and disposed of safely.

12. This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

13. Children should be supervised to ensure that they do not play with the appliance.

14. Please do not turn off the unit at the power point when the unit is running. Use the

power button to turn unit off before turning off at power point.

15. If the unit was turned off at the power point please wait at least 3 minutes before

restarting the unit.

PORTABLE AIR CONDITIONER

Your Air Conditioner has been designed and manufactured to the highest

standards of modern engineering. This unit has been specifically designed

to provide comfort in any room, particularly in warmer conditions.

Features include:

- Easy glide castors – can be moved easily from room to room

- Simple DIY installation – no electrician required – just plug into a

standard 10 amp powerpoint!

- Powerful dehumidification process and filtered air cycle for

improved breathing conditions

- Remote control and soft touch control panel

- 24 hour programmable timer that can be used with either the air

conditioning or dehumidification setting

- Unique sleep control function

- Inverter technology for fast and efficient cooling

- Self evaporative system ensuring no drip tray or hose is required

- 220-240 Volt 50Hz operation

- 1.8 meter cord with plug

Important.

The air conditioning unit must always be stored and

transported upright.

In case of doubt we suggest to wait for at least 24

hours before you start the air-conditioning unit.

NAMES OF THE PARTS

1. Controls

2. Display screen

3. Adjustable air vent

4. Window kit adaptor

5. Exhaust tube

6. Drain hose

7. Cool air inlet

8. Cool air filter

9. Hot air inlet

10. Drain plug

11. Hot air filter

Note: Please ensure drain plug is fitted before use. ( 10 )



PUSH BUTTON SWITCHES & DESCRIPTION OF FUNCTION

1.POWERKEY Press to turn unit "ON" or "OFF".

2. FUNCTION Press this key to select cooling or Dehumidification.

During dehumidifying function, when “dh” is displayed, temperature cannot be

set.

3. TEMPERATURE This key raises the preset temperature by 1 each time it is

REGULATION pressed to a maximum of 30.

KEY (UP)

4. TEMPERATURE This key lowers the preset temperature by 1 each time it is

REGULATION pressed to a minimum of 17 during cooling.

KEY (DOWN)

 In normal conditions, the temperature data which appears on the panel is the ambient

temperature, not the temperature which is set by the user. When the user has adjusted and

set the temperature to his requirement, the data on the panel will return to the ambient

temperature 5 seconds later.

The ambient temperature will descend or change according to the temperature which is set

by the user, but the temperature descendant time and speed will depend on the

environment and space where the unit is situated.

For example, if the ambient temperature is too hot or the room is too large, the speed for the

temperature descent is absolutely slow, and the cooling efficiency will be poor as well.

5. L.E.D. DISPLAY Indicates the temperature or the time setting. After any time set

the display will return to the room temperature.

Error self-check and display

Error display

When the air conditioning unit has problems, the cooling system will shut off, the show

PCB will desplay as below:

Error

code

eerror description failure diagnosis

room temperature sensor

failure

Evaporator temperature sensor

failure

compressor air outlet

temperature sensor fault

display: open circuit or short circuit for 10s in

temperature sensor.

cleanup: temperature sensor get right for 5s.

the data transmission eerror

between the compressor drive

plate and main PCB

Dispay: data transmission intermit for 20s.

Cleanup: data transmission ger right.

Water tank full failure .

indicator.( Water tank full

indicator turn on).

Display: water level sensor short circuit for

3s.

Cleanup: water level sensor open circuit for

3s.

6.SPEED Press to select either LOW, MEDIUM, HIGH or AUTO fan speed.

If "AUTO" is selected, the unit will choose to operates at maximummiddle

or minimum fan speed automatically according to the difference between

room temperature and setting temperature.

If "HIGH" is selected, the unit operates at maximum cooling capacity no

matter what the setting temperature is. The "MEDIUM" OR “LOW" comes

to the same. Automatically setting Dehumidify function: fan speed at LOW.

Heating function: fan speed at LOW, MEDIUM, HIGH.

7. PROGRAMMABLE Programmable timer ON/OFF key.

TIMER TIMER-ON: The timer-on is used to turn on the unit automati-

cally after the set time is over.

(Timer-on key is correspond to the functional indicator light)

1. Press the "TIMER" key at stand-by status to set the time.

Choose the function desired (refrigeration, heat or dehumidification.)

2. Once the set hour has come to an end, the unit will turn on

automatically.

3. Press the "POWER" key before time out, the set time will

be cancelled and the unit will turn on.

TIMER-OFF: The timer-off is used to turn off the unit automati-

cally after the setting time is over.

1. Press the "TIMER" key at stand-by status to set the time

desired.

2. Once the set hour has come to an end, the unit will turn off automatically.

3. By pressing the "POWER" key before the time has been reached,

the set time will be cancelled and the unit will turn off.

8.SLEEP CONTROL 1. Sleep comfort mode under cooling setting , the temperature

FUNCTIE will be increased by 1 after 1 hour. Subsequently,the

temperature will be increased by 2 after 2 hours .And it thereafter

maintains this setting without further changes.

2. Under dehumidification mode, no sleep mode can be chosen.

3. Low fan speed is maintained under sleep comfort mode.

4. Sleep comfort mode under heating setting , the temperature will be

decreased by 1 after 1 hour. Subsequently,the temperature will be

decreased by 2 after 2 hours .And it maintains this setting without

further changes.

9.”E7” When the unit warns of ‘full water’, please unplug the water stopper at the back of

the unit and then lean the unit to drain the water out. Then the unit can be restarted. If

the E7 is presented again, your unit will need to be repaired by a qualified electrician

or returned to the store if still under guarantee.

REMOTE CONTROL FUNCTION

Note: Heating function does not operate if the ambient temperature is over 23.

The unit can defrost automatically and display “Df” if the ambient temperature is

above 20.

INSTALLATION

Install the portable air conditioner in a flat and spacious location where

1. POWER

2. FUNC

3. TIMER

4. AUTO

5. HI

6. MID

7. LOW

8. SLEEP

9. TEMP.

Stop/Start switch

Function “MODE” selector

Hourly programming

Automatic fan speed

High fan speed

Medium fan speed

Low fan speed

Night operation selector

Tem

erature selecto

the air inlets and outlets will not be blocked. A minimum clearance of

40cm from a wall or other obstacles should be kept (as depicted below).

The appliance should not be used in the laundry.

MAINTENANCE

PLEASE DISCONNECT THE POWER CORD BEFORE YOU PROCEED WITH

MAINTENANCE

AIR FILTER

The two air filters located at the back of the unit can be removed, simply

by gripping the filter handle and pulling the frame sideways.

CABINET

Wipe with a damp cloth and polish with a soft cloth.

To remove the air filter, please follow the arrow direction and push the

filter lightly, then take out the filter for cleaning.

POWER SUPPLY

(1) Confirm the correct power.

(2) Insert the plug into the power outlet firmly.

In case of a dangerous water leak, prevent the power cord from

getting wet.

(3) Do not pull the power cord with force as it may damage components

within the power cable.

PLACE OF USE

(1) Because the machine exerts hot air, please don’t operate it in a confined

place.

(2) Don’t place the machine in a sunlit corner otherwise the colours of the

cabinet will fade.

HELPFUL HINTS

This unit is fitted with a special thermal cut off device.

When selecting the refrigerating function, the unit should operate in room

temperatures between 17-32.

Please ensure the unit is not placed against objects which will obstruct air

intake (i.e. furniture or curtains) as this will affect its performance.

Do not place the unit in direct sunlight, as this may cause the unit to overheat

and turn off.

EXHAUST PIPE AND DRAIN PIPE

●To remove the exhaust pipe, press down slightly and pull away from the

unit – turn anti-clockwise.

●Picture indicates the removal of the exhaust pipe.

●Please ensure the exhaust pipe is extended to the closest window before

operating this unit.

TROUBLE SHOOTING

Never try to repair or dismantle the air conditioner yourself. Unauthorized repairs may

result in the loss of warranty and can endanger the user and the property.

Problem Cause Solution

No power supply. Connect to a functioning power

outlet and switch on.

The alarm light is on. Empty the internal water

container.

The air

conditioner does

not function.

Timer function is active. Deactivate TIMER function.

In direct sunlight. Close curtains.

Windows or doors open or

another cooling source in the

room.

Close doors and windows, turn off

alternate cooling sources.

Dirty filter Clean the filter(s).

Air inlet or air outlet blocked. Remove the blockage.

The air

conditioner does

not seem to

perform.

Room temperature lower

than the selected value.

Change temperature selection.

The unit is noisy. Unit is not level. Place on an even, solid surface

(less vibrations.)

The compressor

does not work.

The overheat protection is

activated.

Wait 30 minutes until the

temperature has decreased, then

turn the unit on again.

Distance too long.

Remote control signal not

detected by the control panel.

Make sure the remote control is

correctly aimed at the control

panel.

The remote

control does not

function.

The batteries have drained Replace the batteries.

To correct problems not mentioned in the table and/or if the recommended solutions fail

to solve the problem, please contact an authorized service centre.

SPECIFICATIONS

Model No. PCI53-06MI

Power Source 220-240V~50Hz AC

Power Consumption(EN14511)

Rated Power(EN60335)

2200W

2300W

Cooling Capacity 5300W

Air Flow 600 M3/H

Moisture Removed 70 L/DAY

Refrigerant R410A

Dimensions (mm) 476W x 358D x 840H

(CE) N 842/2006:

R410A is a kind of fluorinated greenhouse gases covered by

the Kyoto Protocol.

Its total global warming potential (GWP) is 1975.

This marking indicates that this product should not be disposed with

other household wastes throughout the EU. To prevent possible

harm to the environment or human health from uncontrolled waste

disposal, recycle it responsibly to promote the sustainable reuse of

material resources. To return your used device, please use the return

and collection systems or contact the retailer where the product was

purchased. They can take this product for environmental safe

recycling.

Inhaltsverzeichnis

Andere Celsius Klimaanlage Handbücher

Celsius

Celsius EVAP 2600 Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Spheros

Spheros CC 355 Bedienungsanleitung

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Bedienungsanleitung

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Samsung

Samsung AR KV Series Leitfaden

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

Hitachi

Hitachi RAS-E24CAK Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Hisense

Hisense 7K Technisches Handbuch

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung