Centech 62359 Montageanleitung

ITEM 62359

Visit our website at: http://www.harborfreight.com

Email our technical support at: [email protected]

ITEM 62359

REV 14e

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference.

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly and service may not be included.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 For technical questions, please call 1-888-866-5797. Item 62359

Important Safety Information

Work Area Safety

1. Keep your work area clean and well lit.

Cluttered benches and dark

areas may cause accidents.

2. Operate the Camera in a

well-ventilated work area.

3. Do not operate the Camera in explosive

atmospheres, such as in the presence of

flammable liquids, gases, or heavy dust.

4. Keep a fire extinguisher suitable for

gasoline/chemical/electrical fires nearby.

5. Keep bystanders, children and visitors

away while operating the Camera.

6. This product is not a toy. Do not allow

children to play with or near this item.

7. Use as intended only.

8. Inspect before every use; do not use

if parts are loose or damaged.

9. Maintain product labels and

nameplates. These carry

important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Electrical Safety

1. Before inspecting walls, shut off the

circuit breakers to the whole house.

2. Before inspecting pipes that may

contain an electric charge, have them

checked by a qualified electrician.

3. Before inspecting an engine,

turn off the automobile.

4. Do not use the Camera

while standing in water.

5. Avoid body contact with grounded

surfaces such as pipes, radiators,

ranges and refrigerators.

6. Do not expose the Handheld Display

Unit to rain or wet conditions.

Water entering the Handheld

Display Unit will increase the

risk of electric shock.

7. Do not place the Imager Head

and Cable into any place that may

contain a live electric charge or

moving parts, which increases

the risk of electric shock.

8. Make sure your hands are dry

before operating the Camera

or charging the battery.

Page 3For technical questions, please call 1-888-866-5797.Item 62359

Camera Safety

1. The Handheld Display Unit is not

waterproof. The Imager Head and

Cable are waterproof to 3m.

See “Specifications” on page 4.

2. Do not use the Camera if condensation

forms in the Imager Head.

Let condensation evaporate before use.

3. Do not submerge the Imager

Head and Cable into corrosive

substances, such as drain cleaner.

4. Do not get gasoline or oil on the

Imager Head and Cable.

5. Do not use excessive force to insert or

withdraw the Imager Head and Cable.

6. Do not use the Camera near

moving machinery.

7. Do not place the Camera on

any unstable cart or surface.

8. Handle the Camera with care. If

the Camera is dropped, check for

breakage and any other conditions

that may affect its operation.

9. Store the Camera, cables and

accessories in a locked area

out of the reach of children.

Personal Safety

1. Wear ANSI-approved safety

goggles during use.

2. Do not wear loose clothing or jewelry.

Keep your hair, clothing, and

gloves away from moving parts.

Loose clothes, jewelry, or long hair

can be caught in moving parts.

3. Do not use the Camera while tired or

under the influence of drugs, alcohol, or

medications. A moment of interruption

can result in serious personal injury.

4. Do not over-reach. Keep proper footing

and balance at all times. Proper footing

and balance enables better control of

the Camera in unexpected situations.

5. Do not use the Camera for personal

inspection or medical use in any

way. This is not a medical camera.

6. WARNING: The cord of this product

contains lead, a chemical known

to the State of California to cause

cancer, and birth defects or other

reproductive harm. Wash hands

after handling. (California Health &

Safety Code § 25249.5, et seq.)

7. People with pacemakers should

consult their physician(s) before

use. Electromagnetic fields in close

proximity to heart pacemaker could

cause pacemaker interference

or pacemaker failure.

8. The warnings, precautions, and

instructions discussed in this instruction

manual cannot cover all possible

conditions and situations that may

occur. It must be understood by the

operator that common sense and

caution are factors which cannot

be built into this product, but must

be supplied by the operator.

Service

There are no user serviceable parts. Camera service must

be performed only by qualified repair personnel.

Page 4 For technical questions, please call 1-888-866-5797. Item 62359

Specifications

Battery Type 4 x AA 1.5V Alkaline (sold separately)

Display Screen 2.4" TFT LCD (234 x 160)

Handheld Display Unit

Operating Temperature 32°F to 113°F

Imager Head 8.5mm (0.3")

Imager Head Lights Adjustable LED

Image Sensor CMOS

Imager Head and Cable Waterproof to 3m

Imager Head and Cable

Operating Temperature 14°F to 176°F

Video Output RCA Cable

Page 5For technical questions, please call 1-888-866-5797.Item 62359

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Page 6 For technical questions, please call 1-888-866-5797. Item 62359

Setup- Before Use:

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this document including all text under subheadings therein

before set up or use.

Components

Cable

Imager

Head with

Light

45°

Mirror

Hook

Magnet

RCA

Cable

Display

Screen

Cable

Connector

Handheld

Display

Unit

RCA

Video Out

Port

Figure A

Page 7For technical questions, please call 1-888-866-5797.Item 62359

Installing Batteries

CAUTION: Position batteries in

proper polarity and do not install

batteries of different types, charge

levels, or capacities together.

The battery compartment is located

on the bottom of the handle.

1. Remove the screw and slide the Battery

Cover off, remove the battery case,

insert four AA batteries (not included).

2. Slide the battery case back in, replace

the Battery Cover and the screw.

Figure B: Battery Cover

Tool Set Up

TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:

Make sure that the Camera is OFF before performing any procedure in this section.

1. Connecting Cable:

a. Carefully push Cable’s key

into Cable Connector’s slot.

b. Turn Cable Connector

counterclockwise until the

Cable and Cable Connector

are securely attached.

2. Disconnecting Cable:

a. Turn Cable Connector clockwise

until the Cable and Cable

Connector are detached.

b. Remove Cable.

Cable

Key

Slot

Cable

Connector

Figure C

3. Attaching Accessories:

a. Carefully slide the accessory

onto the Imager Head.

b. To remove accessory, carefully slide

the accessory off the Imager Head.

Imager

Head

Accessory

Figure D

4. Connecting to External

Monitor with RCA Cable:

Plug one end into the RCA Video Out

Port on Camera, then plug other end

into RCA Video In Port on monitor.

Page 8 For technical questions, please call 1-888-866-5797. Item 62359

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the

beginning of this document including all text under subheadings therein

before set up or use of this product.

TO PREVENT SERIOUS INJURY AND DEATH:

Always wear eye protection. Wear ANSI-approved safety goggles during use.

Before inspecting walls, shut off the circuit breakers to the whole house.

Before inspecting pipes that may contain an electric charge, have them checked by a

qualified electrician.

Before inspecting an engine, turn off the automobile.

Handheld Display Unit Controls

Power

Dim

Light

Brighten

Light

Flip

Image

Figure E

Page 9For technical questions, please call 1-888-866-5797.Item 62359

General Operating Instructions

Live Viewing

View on Display Screen or use RCA cable to view on external monitor.

1. Press the Power button

to turn Camera on.

2. Adjusting Light: Press Left

button to dim and turn off light.

Press Right button to turn

on light and increase brightness.

3. Flip Image: Press the

Flip Image button to flip

image horizontally and vertically.

4. When finished, press the Power button

to turn the Camera off, then clean

and store according to “Inspection

and Maintenance” on page 10.

Page 10 For technical questions, please call 1-888-866-5797. Item 62359

Inspection and Maintenance

Procedures not specifically explained in this manual

must be performed only by a qualified technician.

TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK:

Make sure that the Camera is OFF before performing any procedure in this section.

TO PREVENT SERIOUS INJURY FROM TOOL FAILURE:

Do not use damaged equipment. If abnormal noise or vibration

occurs, have the problem corrected before further use.

Inspection

BEFORE EACH USE, inspect the

general condition of the tool. Check for:

• condensation in Imager Head,

• cracked or damaged Cable,

• cracked or broken parts, and

• any other condition that may

affect its safe operation.

Cleaning and Storage

1. AFTER USE, use a mild detergent

on a clean cloth to remove any oil,

grease or dirt from the Camera,

especially on the buttons and ports,

being careful to not put excessive

pressure on the Display Screen.

2. Remove batteries before storage.

3. Store the Camera, cables and

accessories in a locked area

out of the reach of children.

Troubleshooting

Problem Possible Causes Likely Solutions

Display is on, but does

not show image.

1. Cable connection loose.

2. Imager Head is dirty.

1. Check that cable is connected.

2. Clean Imager Head.

1. Light is dim at

maximum brightness.

2. Display turns itself off.

3. Camera will

not turn on.

Low Batteries. Replace Batteries.

Follow all safety precautions whenever diagnosing or servicing the tool.

Disconnect power supply before service.

Inhaltsverzeichnis

Andere Centech Digitalkamera Handbücher

Centech

Centech 61839 Montageanleitung

Beliebte Digitalkamera Handbücher anderer Marken

Mercury

Mercury 350K Bedienungsanleitung

Pentax

Pentax Optio LS 465 Bedienungsanleitung

Sanyo

Sanyo VPC-S1085 Bedienungsanleitung

GE SMART A1255 Bedienungsanleitung

Point Grey

Point Grey Gazelle Bedienungsanleitung

Nikon

Nikon COOLPIX A Bedienungsanleitung

Pentax

Pentax P-5 Bedienungsanleitung

BlazeVideo

BlazeVideo A280 Bedienungsanleitung

Sony

Sony MCA-20 Bedienungsanleitung

Sony

Sony Alpha DSLR-A290 Bedienungsanleitung

ATIK Cameras

ATIK Cameras One Bedienungsanleitung

CohuHD Costar

CohuHD Costar 3930 Series Bedienungsanleitung

Leica

Leica M10-R Bedienungsanleitung

FujiFilm

FujiFilm FinePix A700 Bedienungsanleitung

Lorex

Lorex LNZ81P25 Series Bedienungsanleitung

GE J1470S Bedienungsanleitung

Sony

Sony A6700 Benutzerhandbuch

Canon

Canon EOS ELAN7 Bedienungsanleitung