Centech 94138 Bedienungsanleitung

Hand WHand W

Hand Wandand

andand

and

Metal DetectorMetal Detector

Metal Detector

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http://www.harborfreight.com

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions and replacement parts, please call 1-800-444-3353

94138

Due to continuing improvements, actual product may differ slightly from the product described herein.

SKU 94138 Page 2

Specifications

Save This Manual

You will need the manual for the safety warnings and precautions, assembly

instructions, operating and maintenance procedures, parts list and diagram. Keep

your invoice with this manual. Write the invoice number on the inside of the front

cover. Keep the manual and invoice in a safe and dry place for future reference.

Safety Warnings and Precautions

WARNING: When using this tool, basic safety precautions should always be

followed to reduce the risk of personal injury and damage to equipment.

Read all instructions before using this hand wand metal detector!

1. Keep work area clean. Cluttered areas invite injuries.

2. Keep children away. Children must never be allowed in the work area. Do

not let them handle machines, tools, or extension cords.

3. Store idle equipment. When not in use, tools must be stored in a cool and

dry location to inhibit rust. Always lock up tools and keep out of reach of

children.

4. Use the right tool for the job. Do not attempt to force a small tool or

attachment to do the work of a larger industrial tool. There are certain

applications for which this tool was designed. It will do the job better

and more safely at the rate for which it was intended. Do not modify this

tool and do not use this tool for a purpose for which it was not intended.

5. Do not overreach. Keep proper footing and balance at all times. Do not

reach over or across running machines.

:noitcurtsnoC esaCcitsalPSBA

scinortceleetatsdiloS :ecruoSrewoP

.)dedulcniton(yrettabCDV9

,esusruoh08otpU

trelarewopwolhtiw

:draynaLtsirW.dedulcnI:mralA.thgilDELdnarezzuboiduA

gnitarepO

:tnemnorivnE .F°221-F°41 gnit

arepO

:ycneuqerF zHK31

:ytivitisneS

.elbatsujdaylsuounitnoC

.gninutcitamotuA

secudernottubezitisneseD

.%05yb

ytivitisnes

"61/31htpedmumixaM

snoitidnoclaedirednu

:snoitpO

enohpraednatropgnigrahC

dnaregrahC.dedivorpkc

.dedulcnitonenohprae

.dedulcniesacegarotS

:snoisnemiDD"8/5-1xW"¾-3xL"½-61:thgieWteN.yrettabhtiwSBL58.0

SKU 94138 Page 3

6. Maintain tools with care. Keep tools maintained and clean for better and

safer performance. Follow instructions for maintenance and changing

accessories.The handle must be kept clean, dry, and free from oil and grease

at all times.

7. Disconnect power.Turn off tool when not in use.

8. Avoid unintentional starting. Be sure the switch is in the Off position when

not in use and before replacing battery.

9. Stay alert. Watch what you are doing, use common sense. Do not operate

any tool when you are tired.

10. Check for damaged parts. Before using this tool, any part that appears

damaged should be carefully checked to determine that it will operate properly

and perform its intended function. Check for any condition that may affect

proper operation. Any part that is damaged should be properly repaired or

replaced by a qualified technician. Do not use the wand if the switch does not

turn On and Off properly.

11. Guard against electric shock. Prevent body contact with grounded surfaces

such as pipes, radiators, ranges, and refrigerator enclosures.

12. Do not operate this tool if under the influence of alcohol or drugs. Read

warning labels on prescriptions to determine if your judgment or reflexes are

impaired while taking drugs. If there is any doubt, do not operate the wand.

13. Maintenance. For your safety, service and maintenance should be performed

regularly by a qualified technician. If the wand is to be stored for an extended

period of time, remove the battery to prevent damage.

14. People with pacemakers should consult their physician(s) before using this

product. Electromagnetic fields in close proximity to a heart pacemaker could

cause interference to or failure of the pacemaker.

15. Harbor Freight Tools can not guarantee accuracy of this device.

16. Check battery strength frequently, lower battery strength can affect the

performance of this device.

NOTE: This wand is water resistant, but not water proof. If exposed to prolonged

rain or wet conditions, it is likely to be damaged. Protect this tool from exposure to

water, and wipe it off immediately if it becomes wet.

Warning:The warnings, cautions, and instructions discussed in this instruction

manual cannot cover all possible conditions and situations that may occur. It

must be understood by the operator that common sense and caution are factors

which cannot be built into this product, but must be supplied by the operator.

SKU 94138 Page 4

Unpacking

When unpacking, check to make sure the following parts are included.

Hand Held Metal Detector Wand

Carrying Case

If any parts are missing or broken, please call Harbor Freight Tools at the number

on the cover of this manual.

Operation

First install one 9 volt battery (not included).

1. Slide open the battery compartment cover,

located at the base of the handle.

2. If there is an old battery in place, remove it.

Insert one 9 volt battery (not included) into the

battery compartment. Be sure that the polarity

of the battery matches the correct poles

marked “+” and “-”. If the battery is installed

improperly, the detector can be damaged.

3. Slide the battery compartment cover back

in place. Be sure it is closed tight.

NOTE: This hand wand metal detector has a

low battery warning system.

When the battery starts to get low, the detector will make a “chirping” sound

instead of the normal steady tone when encountering metal. Also, the LED

light will flash on and off rapidly when near metal. In this situation, replace the

battery.

NOTE: You may use rechargeable batteries with this detector (not included).

If using rechargeable Nickle-Cadmium battery, you may use a recharging unit

(not supplied) plugged into the recharge jack.

WARNING: Do not attempt to recharge Alkaline or other non-rechargeable

batteries; they may explode.

The battery compartment

SKU 94138 Page 5

Basic operation of the hand wand metal detector:

1. Slide the ON / OFF switch to the ON position to turn the detector on. Slide it

to the OFF position to turn it OFF. When the detector is turned ON, it will

“chirp” briefly.

2. When not in use, turn the switch to OFF to conserve battery life.

3. To detect metal, pass the scanner near the search area. If metal is detected,

you will hear a high pitched tone, and the LED light will come on. The sound

and light warnings will stop if the detector is moved away from the metal. The

detector will emit a long tone for large objects and a short tone for small objects.

NOTE: Before using the detector, always test it by turning it on and scanning a

small piece of metal, such as a coin. Be sure the warning sound is a smooth,

continuous tone, and the light shines steadily. A chirping sound and flashing

light indicate low battery strength. Replace the battery before using.

To adjust the detector sensitivity:

The detector is set to optimum sensitivity for most security scanning

purposes.You can adjust the sensitivity for other applications or as needed.

1. Remove the rubber cover from the handle by sliding it off.You will see two

small holes in the middle of the handle. Please refer to diagram on page 6.

2. Insert the tip of a small, flat blade screwdriver into the 1/8” hole. Turn it slightly

to engage the adjustment screw inside. Do not adjust the fitting in the second

hole, which is for factory use only.

3. Using a test object, adjust the control for the desired sensitivity. Turning the

screw clockwise increases sensitivity. Turning the screw counterclockwise

decreases sensitivity. While keeping the detector stationary at a specific

distance from the test object adjust the screw until the alarm sounds. This is

your desired sensitivity.

4. Replace the rubber cover on the handle.

SKU 94138 Page 6

Using the Desensitize Button:

1. In some cases the detector will be too sensitive.You can decrease

sensitivity by 50% by pressing and holding the Desensitize Button.

ON / OFF switchCharger / Earphone Jack and

Desensitize Button

SKU 94138 Page 7

Using an earphone (not included):

1. For quiet operation, you can use an earphone (not included) that has a 1/8”

jack.You can hear the alarm through the earphone. Insert the earphone jack

in the plug in shown on page 6.

2. Using an earphone jack will silence the normal alarm sound.

Maintenance

1. When not in use, turn the detector OFF to save the battery.

2. If the detector will not be used for several months, remove the battery before

storage to prevent possible damage caused by leaking battery.

3. Keep the detector dry. If it gets wet, wipe it off immediately.Your detector is

not designed for use in the rain or in a wet environment.

4. Handle the detector with care. If dropped, it can be damaged causing

unreliable operation.

5. Do not expose the detector to extreme temperatures.

6. To clean the detector, wipe it with a damp cloth using clean water or mild

detergent.

7. Modifying or tampering with the detector or adjusting the factory adjustment

can damage the unit.

CAUTION: Do not open tool or attempt any repair.There are no owner

repairable components in this tool. If repairs are needed, take this

detector to a qualified service technician for service.

SKU 94138 Page 8

Schematic Diagram

TOP SECTION

NOTE: Replacement parts or accessories specific to this wand are not available from

Harbor Freight Tools for this item. Replacement batteries, charger and ear jack may

be available at your local Harbor Freight Tools retail outlet, or are commonly available

from hardware and department stores.

Bottom section on page 9.

SKU 94138 Page 9

BOTTOM SECTION

Schematic Diagram (continued)

Top section on page 8.

SKU 94138 Page 10

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and

durability standards, and warrants to the original purchaser that this product is free from defects in

materials and workmanship for the period of one year from the date of purchase. This warranty

does not apply to damage due directly or indirectly to misuse, abuse, negligence or accidents;

repairs or alterations outside our facilities; or to lack of maintenance. We shall in no event be liable

for death, injuries to persons or property, or for incidental, contingent, special or consequential

damages arising from the use of our product. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation of exclusion may not apply to you.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the

merchandise. If our inspection verifies the defect, we will either repair or replace the product at our

election or we may elect to refund the purchase price if we cannot readily and quickly provide you

with a replacement. We will return repaired products at our expense, but if we determine there is no

defect, or that the defect resulted from causes not within the scope of our warranty, then you must

bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from

state to state.

3491 Mission Oaks Blvd. • P.O. Box 6009 • Camarillo, CA 93011 • (800) 444-3353

LIMITED 1 YEAR

WARRANTY

WARRANTY CARD

Inhaltsverzeichnis

Andere Centech Metalldetektor Handbücher

Centech

Centech CEN-TECH 97245 Installationshandbuch

Beliebte Metalldetektor Handbücher anderer Marken

Garrett

Garrett MAGNASCANNER CS 5000 Bedienungsanleitung

Valex

Valex 1800200 Bedienungsanleitung

Gauss

Gauss MIL MD Bedienungsanleitung

Velleman

Velleman CS130 Bedienungsanleitung

Sears

Sears 321.596370 Bedienungsanleitung

Eriez

Eriez X8 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-22 Bedienungsanleitung

Zircon

Zircon MetalliScanner m60c Bedienungsanleitung

nalanda

nalanda MD027 Bedienungsanleitung

REV Ritter

REV Ritter CB-7005 Bedienungsanleitung

Minelab

Minelab F1A4 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs F70 Bedienungsanleitung

Steinberg Systems

Steinberg Systems SBS-MD-12 Bedienungsanleitung

GOLDEN MASK

GOLDEN MASK 5 Bedienungsanleitung

Grizzly

Grizzly YM 203 Bedienungsanleitung

Fisher Research Labs

Fisher Research Labs 1280-X Aquanaut Bedienungsanleitung

Treasure Cove

Treasure Cove Vibra-Probe 560 Bedienungsanleitung

Accurate Locators

Accurate Locators XL16 IMAGER Bedienungsanleitung