CentoLight Plot 120F Bedienungsanleitung

Carefully read this manual and properly take care of it

Leggete questo manuale e conservatelo per future consultazioni

User Manual

Manuale Utente

120W Mini Led Fresnel Light with Rotatable Barndoor

Faro Fresnel Compatto con Led da 120W e Alette Ruotabili

ENG

ITA

Plot 120FPlot 120F

Dear customer,

First of all thanks for purchasing a CENTOLIGHT® product. Our mission is to satisfy

all possible needs of light designers and professionals of entertainment lighting, by

offering a wide range of products based on the latest technologies.

We hope you will be satisfied with this fixture and, if you want to collaborate, we

are looking for a feedback from you about product operation and possible im-

provements to be introduced in the next future. Go to our website www.centolight.

com and send an e-mail with your opinion; this will help us to build equipment ever

closer to professional’s real requirements.

The CENTOLIGHT Team

Gentile Cliente,

Grazie per aver scelto un prodotto CENTOLIGHT®. La nostra missione è quella di

soddisfare ogni possibile richiesta da parte di light designers e professionisti dell’il-

luminotecnica per l’intrattenimento, offrendo una vasta gamma di apparecchiature

basate su tecnologie di ultima generazione.

Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, sarem-

mo lieti di ricevere un vostro feedback sulla qualità del prodotto al fine di migliorare

costantemente la nostra produzione. Visitate il nostro sito www.centolight.com ed

inviateci una mail con la vostra opinione; questo ci aiuterà a sviluppare nuovi pro-

dotti quanto più vicini alle vostre esigenze.

Il Team CENTOLIGHT

Eng

Table of ConTenTs

1 - Before you Begin 4

1.1. What is included- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

1.2. Unpacking Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

1.3. Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

1.4. Disclaimer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

2 - Safety Instructions 5

2.1. Symbols Meaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

3 - Mounting and Rigging 5

3.1. Rigging - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

3.2. Water / Moisture - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

3.3. Heat - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

3.4. Servicing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

4 - Introduction 7

4.1. Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

4.2. Product Dimensions- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

5 - Product Setup 8

5.1. Rear Panel Description- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

5.2. About Dmx Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

5.3. DMX Terminator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

5.4. 3-Pin vs 5-Pin DMX cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

6 - Menu Operation 11

6.1. Setting the DMX Address - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

6.2. DMX Channel Assignments and Values - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12

7 - Lux Chart 12

8 - Troubleshooting 13

9 - Specication 14

10 - Warranty And Service 15

11 - Warning 16

PLOT 120F User Manual

Eng

1 - before you begin

Thank you for purchasing PLOT 120F. Enjoy your new equipment and make sure to

read this manual carefully before operation! This user manual is made to provide

both an overview of controls, as well as information on how to use them.

1.1. What is included

Package include:

y1x CENTOLIGHT PLOT 120F Fresnel Light

y1x 1.2m (47in ca.) Powercon to Europlug power cable

y1X 1.2m (47in ca.) DMX Cable 3-pin XLR-M to 3-pin XLR-F

yThis User Manual

ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep in

a safe place the original packaging material for future use.

1.2. Unpacking Instructions

Carefully unpack the product immediately and check the content to make sure all

the parts are in the package and are in good condition. If the box or the contents

(the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier or dealer/seller immediately. In addition, keep

the box and contents for inspection.

If the ﬁxture must be returned to the manufacturer, it is important that it is returned

in the original manufacturer box and packing. Please do not take any action without

ﬁrst contacting your dealer or getting in touch with our after-sales support service

(visit www.centolight.com for details).

1.3. Accessories

CENTOLIGHT can supply a wide range of quality accessories that you can use with

your PLOT Series equipment, like Cables, Splitters, DMX controllers, and a wide

range of other ﬁxtures. Ask your CENTOLIGHT dealer or check out our website www.

centolight.com. All products in our catalogue has been long tested with this device,

so we recommend you to use Genuine CENTOLIGHT Accessories and Parts.

1.4. Disclaimer

The information and speciﬁcations contained in this Manual are subject to change

without notice. CENTOLIGHT assumes no responsibility or liability for any errors or

omissions and reserves the right to revise or to create this manual at any time.

PLOT 120F User Manual

Eng

2 - safeTy insTruCTions

yRead these instructions

yKeep these instructions

yHeed all warning

yFollow all instructions

2.1. Symbols Meaning

The symbol is used to indicate that some hazardous live termi-

nals are involved within this apparatus, even under the normal

operating conditions, which may be sufﬁcient to constitute the

risk of electric shock or death.

The symbol is used to describe important installation or conﬁg-

uration problems. Not following advice and information on how

to avoid such problems may lead to product malfunction.

This symbol indicates a protective grounding terminal.

WARNING: Describes precautions that should be observed to prevent the

danger of injury or death to the operator.

To protect the environment, please try to recycle packing materi-

al and exhausted consumables as much as possible.

This symbol indicates that the ﬁxture is intended to indoor use

only. Keep the machine dry and do not expose to rain and mois-

ture.

Don’t throw this product away just as general trash, please deal

with the product follow the abandon electronic product regula-

tion in your country.

3 - MounTing and rigging

Pay attention to safety! Please respectively consider the EN 60598-2-17 and the

national standard during the installation. Only authorized technicians can carry

out the installation.

PLOT 120F User Manual

Eng

3.1. Rigging

yThe installation of the ﬁxture has to be built and constructed in a way that it

can hold 10 times the weight for 1 hour without any harming demolition. The

installation must always be secured with a secondary safety attachment, e.g. an

appropriate catch net. This secondary safety attachment must be constructed in

a way that no part of the installation can fall down if the main attachment fails.

yWhen rigging, de-rigging or servicing the ﬁxture staying in the area below the

installation place, on bridges, under high working places and other endangered

areas is forbidden. The operator has to make sure that the safety measure and

the machine’s technical installation is approved by an expert before taking into

operation for the ﬁrst time and after changes before taking into operation an-

ther time. He has also to make sure that an expert approves safety measure and

the machine’s technical installation once a years.

IMPORTANT: Overhead rigging requires extensive experience, including (but not

limited to) calculating working load limits, installation material being used, and

periodic safety inspection of all installation material and the projector. If you

lack these qualications, do not attempt the installation yourself, but instead

use a professional structural rigger. Improper installation can result in bodily

injury or property loss.

yIf the ﬁxture shall be lowered from the ceiling or high joists, professional trussing

systems have to be used. The ﬁxture must never be ﬁxed swinging freely in the

room.

CAUTION: Use appropriate clamps to rig the xture on the truss. Make sure that

the device is xed properly! Ensure that the structure (truss) to which you are

attaching the xtures is secure.

3.2. Water / Moisture

yThe product is for indoor use. In order to prevent risk of ﬁre or electric shock, do

not expose to rain or moisture

yThe unit can not be used near water; for example near a bathtub, a kitchen sink,

a swimming pool, etc.

3.3. Heat

yDo not use in a conﬁned space. Always install the product in a location with

adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that

no ventilation slots on the product’s housing are blocked.

PLOT 120F User Manual

Eng

yThe apparatus should be located away from heat sources such as radiators,

stoves or other appliances that produce heat.

Do not use it when maximum ambient temperature is higher than 50°C. Work

temperature ranges from -20°C to 55°C (-4°F to 131°F).

3.4.Servicing

yDo not implement any servicing other than those means described in the man-

ual. Refer all servicing to qualiﬁed service personnel only. The internal compo-

nents of the equipment must be purchased from the manufacturer. Only use

accessories/attachments or parts recommended by the manufacturer.

4 - inTroduCTion

Centolight PLOT 120F is a Fresnel spot with 60° beam and 120W warm-white COB

Led. It is designed for all those ﬁxed applications where a compact ﬁxture with

warm-white light (approx. 3200K) an excellent color rendering is required.

The low-noise is based on the high quality of fans and the built-in processor that

constantly balances chip temperature and fan speed, always keeping it within 20dB

@ 1m distance. The ﬁxture is equipped with rotatable barndoor.

4.1. Features

yMini LED Fresnel Light with 60° Beam Angle

y120W Warm-White COB LED with over 50,000h lifetime

yColor Temperature: 3200K

yLuminous Flux: 1350lux/3m

yCRI: Ra≥90

ySmooth 16-bit Dimmer

yFlicker-Free Operation

yLow-Noise Cooling System

yRotatable Barndoor Included

PLOT 120F User Manual

Eng

4.2.Product Dimensions

245mm (9.64”)

120mm (4.72”)

160mm (6.30”)

210mm (8.27”)

215mm (8.46”)

5 - ProduCT seTuP

5.1. Rear Panel Description

PLOT 120F

POWER INDMX IN DMX OUT

DOWN ENTERUPMENU

Imported by:

FRENEXPORT SPA

www.frenexport.com

AC100~240V

50/60Hz

The operation panel includes a 4-characters LED display and the control button

operation area.

1) LED Display

It shows the operating mode and all system information. Read “6 - Menu Operation”

on page 11 for details on all menus.

PLOT 120F User Manual

Eng

2) Control Buttons

MENU Button - Short-press it to switch the setting pages.

UP Button - It scrolls up individual items in the selection menu and sub-menus for

system settings (DMX address, Operation Mode, etc.), and increases values/settings

of parameters.

DOWN Button - It scrolls down individual items in the selection menu and sub-

menus for system settings (DMX address, Operation Mode, etc.), and increases

values/settings of parameters.

ENTER Button - Press ENTER to access menu levels and conﬁrm parameter value

changes.

3) DMX Input/Output Sockets

DMX Input is a 3-pin male XLR socket for connection to a DMX control device. DMX

output is a3-pin female socket for sending the DMX control signal to other units.

Please read “5.2. About Dmx Connection” on page 10 for details on how to man-

age DMX connections.

4) Power Input/Output Sockets

Plug the power-cord included with PLOT 120F into an AC socket properly conﬁgured

for this ﬁxture. Please read “About Power Connection” on page 9 for details.

About Power Connection

yAlways make sure that the voltage of the outlet you are connecting the product

to is within the range stated in paragraph “9 - Speciﬁcation” on page 14 or

rear panel of the product (AC110V-240V 50/60Hz).

yMake sure the power cord is not crimped or damaged. Never connect this prod-

uct to a dimmer pack or rheostat.

yNever disconnect the product from power cord by pulling or tugging on the cord.

yTo avoid electric shock, all ﬁxtures must be connected to circuits with a suitable

ground and circuit breaker.

yWire correspondence is as follows:

Cable (EU) Pin International

Brown Live L

Blue Neutral N

Yellow/Green Earth

Earth must be connected! Always pay attention to safety! Before taking into

operation for the rst time, the installation has to be approved by an expert.

1010

PLOT 120F User Manual

Eng

5.2. About Dmx Connection

When use a DMX controller, please make sure that there is no interference

sources (e.g. intercom, high frequency radio waves and radiation source).

DMX machines are designed to receive data through a serial Daisy Chain. A Daisy

Chain connection is where the DATA OUT of one ﬁxture connects to the DATA IN of

the next ﬁxture. The order in which the machines are connected is not important

and has no effect on how a controller communicates to each of them. Use an order

that provides for the easiest and most direct cabling.

3-Pin XLR

Pin 1: GND

Pin 2: DMX -

Pin 3: DMX +

OUTPUTINPUT

DMX use of 3-Pin XLR Connectors

DMX Termonator

Unit 1 Unit 2 Last Unit

DMX 512

Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR

male to female connectors. The shield connection is pin 1, while pin 2 is Data Nega-

tive (S-), and pin 3 is Data positive (S+).

CAUTION: Wires must not come into contact with each other; otherwise the x-

tures will not work at all, or will not work properly.

5.3. DMX Terminator

120ohm, 1/4W

Resistor

DMX Terminator

DMX is a resilient communication protocol, however errors still

occasionally occur. In order to prevent electrical noise from dis-

turbing and corrupting the DMX control signals, a good habit is to

connect DMX output of last ﬁxture in the chain to a DMX termina-

tor, especially over long signal cable runs.

The DMX terminator is simply an XLR connector with a 120Ω

(ohm), 1/4 Watt resistor connected across Signal (-) and Signal (+),

respectively, pins 2 and 3, which is then plugged into the output

socket on last projector in the chain. The connections are illustrat-

ed below.

Complimentary signal cable can transmit signals to 20 unit xtures at most.

Signal amplier is a must to connect more xtures.

Inhaltsverzeichnis

Sprachen:

Andere CentoLight DJ-Equipment Handbücher

CentoLight

CentoLight Scenic C1012 Bedienungsanleitung

CentoLight

CentoLight Scenic W504 Bedienungsanleitung

CentoLight

CentoLight Zephiro Bubble 300 Bedienungsanleitung

CentoLight

CentoLight LIGHTBLASTER 1200WP Bedienungsanleitung

CentoLight

CentoLight ZEPHIRO SNOW 600 Bedienungsanleitung

CentoLight

CentoLight ZEPHIROSNOW 1250 Bedienungsanleitung

CentoLight

CentoLight Scenic C1018Z Bedienungsanleitung

CentoLight

CentoLight Square 100PZ Bedienungsanleitung

CentoLight

CentoLight Lightblaster 200 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung