CentoLight Moodwasher 4810WP Bedienungsanleitung

Carefully read this manual and properly take care of it

Leggete questo manuale e conservatelo per future consultazioni

User Manual

Manuale Utente

48x 10W RGBW 4in1 Led Waterproof Projector

ENG

ITA

Proiettore da Esterno con 48 Led da 10W RGBW 4in1

Moodwasher 4810WP

Dear customer,

First of all thanks for purchasing a Centolight® product. Our mission is to satisfy all

possible needs of light designers and professionals of entertainment lighting, by

offering a wide range of products based on the latest technologies.

We hope you will be satisfied with this fixture and, if you want to collaborate, we

are looking for a feedback from you about product operation and possible im-

provements to be introduced in the next future. Go to our website www.centolight.

com and send an e-mail with your opinion; this will help us to build equipment ever

closer to professional’s real requirements.

The Centolight Team

Gentile Cliente,

Grazie per aver scelto un prodotto Centolight®. La nostra missione è quella di sod-

disfare ogni possibile richiesta da parte di light designers e professionisti dell’illu-

minotecnica per l’intrattenimento, offrendo una vasta gamma di apparecchiature

basate su tecnologie di ultima generazione.

Speriamo di aver soddisfatto le vostre aspettative e, se voleste collaborare, sarem-

mo lieti di ricevere un vostro feedback sulla qualità del prodotto al fine di migliorare

costantemente la nostra produzione. Visitate il nostro sito www.centolight.com ed

inviateci una mail con la vostra opinione; questo ci aiuterà a sviluppare nuovi pro-

dotti quanto più vicini alle vostre esigenze.

Il Team Centolight

Eng

Table of ConTenTs

1 - Before You Begin 4

1.1. What is included- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

1.2. Unpacking Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

1.3. Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

1.4. Disclaimer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

2 - Safety Instructions 5

2.1. Symbols Meaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 5

3 - MOUNTING AND RIGGING 5

3.1. Rigging - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

3.2. Heat - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6

3.3. Servicing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

4 - Introduction 7

4.1. Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7

5 - Product Overview 8

6 - Product Setup 8

6.1. Rear Panel Description- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8

6.2. Power and Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9

6.3. Mains Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

6.4. Dmx Connection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10

6.5. DMX Terminator - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

6.6. 3-Pin vs 5-Pin DMX cables - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

7 - Menu Operation 12

8 - DMX Channel Chart 12

9 - Lux Chart 13

10 - Troubleshooting 13

11 - Specication 14

12 - Warranty And Service 15

13 - Warning 16

Moodwasher 4810WP User Manual

Eng

1 - before You begin

Thank you for purchasing Moodwasher 4810WP waterproof Projector. Enjoy your

new equipment and make sure to read this manual carefully before operation. This

user manual is made to provide both an overview of controls, as well as information

on how to use them.

1.1. What is included

Package include:

y1x Centolight Moodwasher 4810WP projector

y1x 1.5m Power Cable (Euro-Plug to Waterproof Powercon)

yThis User Manual

ATTENTION: Packaging bag is not a toy! Keep out of reach of children!!! Keep in

a safe place the original packaging material for future use.

1.2. Unpacking Instructions

Carefully unpack the product immediately and check the content to make sure all

the parts are in the package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged

by the shipping, or show signs of mishandling, notify the carrier or dealer/seller

immediately. In addition, keep the box and contents for inspection.

If the ﬁxture must be returned to the manufacturer, it is important that it is returned

in the original manufacturer box and packing. Please do not take any action without

ﬁrst contacting your dealer or getting in touch with our after-sales support service

(visit www.centolight.com for details).

1.3. Accessories

Centolight can supply a wide range of quality accessories that you can use with

your ﬁxture, like Clamps, Cables, Splitters, DMX controllers, and a wide range of

other ﬁxtures.

All products in our catalogue has been long tested with this device, so we recom-

mend you to use Genuine Centolight Accessories and Parts.

Ask your Centolight dealer or check out our website www.centolight.com for any

accessories you could need to ensure best performance of the product.

Moodwasher 4810WP User Manual

Eng

1.4. Disclaimer

The information and speciﬁcations contained in this User Manual are subject to

change without notice. Centolight assumes no responsibility or liability for any errors

or omissions and reserves the right to revise or to create this manual at any time.

2 - safeTY insTruCTions

yRead these instructions

yKeep these instructions

yHeed all warning

yFollow all instructions

2.1. Symbols Meaning

The symbol is used to indicate that some hazardous live termi-

nals are involved within this apparatus, even under the normal

operating conditions, which may be sufﬁcient to constitute the

risk of electric shock or death.

The symbol is used to describe important installation or conﬁg-

uration problems. Not following advice and information on how

to avoid such problems may lead to product malfunction.

This symbol indicates a protective grounding terminal.

WARNING: Describes precautions that should be observed to prevent the

danger of injury or death to the operator.

To protect the environment, please try to recycle packing materi-

al and exhausted consumables as much as possible.

Don’t throw this product away just as general trash, please deal

with the product follow the abandon electronic product regula-

tion in your country.

3 - MounTing anD rigging

Pay attention to safety! Please consider the EN 60598-2-17 and the national

standard during installation. Only authorized technicians can carry out it.

Moodwasher 4810WP User Manual

Eng

3.1. Rigging

yThe installation of the ﬁxture has to be built and constructed in a way that it

can hold 10 times the weight for 1 hour without any harming demolition. The

installation must always be secured with a secondary safety attachment, e.g. an

appropriate catch net. This secondary safety attachment must be constructed in

a way that no part of the installation can fall down if the main attachment fails.

yWhen rigging, de-rigging or servicing the ﬁxture staying in the area below the

installation place, on bridges, under high working places and other endangered

areas is forbidden. The operator has to make sure that the safety measure and

the machine’s technical installation is approved by an expert before taking into

operation for the ﬁrst time and after changes before taking into operation an-

ther time. He has also to make sure that an expert approves safety measure and

the machine’s technical installation once a years.

IMPORTANT: Overhead rigging requires extensive experience, including (but not

limited to) calculating working load limits, installation material being used, and

periodic safety inspection of all installation material and the projector. If you

lack these qualications, do not attempt the installation yourself, but instead

use a professional structural rigger. Improper installation can result in bodily

injury or property loss.

yIf the ﬁxture shall be lowered from the ceiling or high joists, professional trussing

systems have to be used. The ﬁxture must never be ﬁxed swinging freely in the

room.

CAUTION: Use appropriate clamps to rig the xture on the truss. Make sure that

the device is xed properly! Ensure that the structure (truss) to which you are

attaching the xtures is secure.

3.2. Heat

yDo not use in a conﬁned space. Always install the product in a location with

adequate ventilation, at least 20in (50 cm) from adjacent surfaces.

yThe apparatus should be located away from heat sources such as radiators,

stoves or other appliances that produce heat.

Don not use it when maximum ambient temperature is higher than 55°C. Work

temperature ranges from -30 to 55°C (from -22 to 131°F).

Moodwasher 4810WP User Manual

Eng

3.3. Servicing

yDo not implement any servicing other than those means described in the man-

ual. Refer all servicing to qualiﬁed service personnel only. The internal compo-

nents of the equipment must be purchased from the manufacturer. Only use

accessories/attachments or parts recommended by the manufacturer.

4 - inTroDuCTion

Moodwasher series by Centolight was created to offer outdoor projectors suitable

for all those architectural and live applications that require diffused lights (back-

drops of scenes, architectural structures, etc.) and with a medium-amplitude (36°)

projection angle. The Moodwasher 4810WP has a light source consisting of 48 10W

RGBW 4in1 LEDs arranged in 4 horizontal rows of 12 each.

The luminescence in Full-color @ 2m condition can reach 29300 Lux. CRI is higher

than 80 in order to guarantee an excellent color rendering in all uses. The 16-bit

dimmer control is extremely accurate; the scanning frequency higher than 6kHz

makes this ﬁxture ﬂicker-free, that is, suitable even during television shooting.

The cooling system is convection cool, and it is provided by the rear structure in die-

cast aluminum designed to ensure an excellent heat exchange. Since there are no

fans, the projector is silent and suitable for use in situations where the total absence

of noise is required (museums, theaters, outdoor musical and theater performances,

etc.).

The die-cast aluminum structure of the light, the front thermal cut glass, the rubber

seals and the stainless-steel screws guarantee total waterprooﬁng and a great

lifespan over the years despite the exposure to any weather conditions.

4.1. Features

yWaterproof Projector with 36° Beam Angle

y18x12W RGBW 4in1 LED with over 30,000h lifetime

yLuminous Flux: 29300 Lux (RGBW @2m)

yCRI: Ra≥80

yFlicker Free Operation

ySilent Operation

ySmooth 16-bit Dimmer

yIP65 Protection Degree

yWaterproof DMX and Power connections

Moodwasher 4810WP User Manual

Eng

5 - ProDuCT overview

Bracket

Adjustment

knob

18W 4in1

Leds

6 - ProDuCT seTuP

POWER IN

(100-240v/50-60Hz)

POWER OUT

DMX IN

DMX OUT

ENTERMENU

Imported in the EU by FRENEXPORT SPA

Via E. Ferrari, 10 - 62017 Porto Recanati (Italy)

www.frenexport.com

31 47 8

6.1. Rear Panel Description

The operation panel includes power and DMX connectors, as well as LED display

and control buttons.

1) MENU Button

Short-press it to switch the setting pages (please read paragraph “7 - Menu Opera-

tion” on page 12 for further details about menus and settings).

2) UP Button

It scrolls up individual items in the selection menu and sub-menus for system set-

tings (DMX address, Operation Mode, etc.) and increases values/settings of param-

eters.

Moodwasher 4810WP User Manual

Eng

3) DOWN Button

It scrolls down individual items in the selection menu and sub-menus for system

settings (DMX address, Operation Mode, etc.) and decreases values/settings of

parameters.

4) ENTER Button

Press ENTER to access menu levels and conﬁrm parameter value changes.

5) Led Display

It shows the operating mode and other system information.

6) DMX Input & Output

3-pin XLR sockets for connection to a DMX another projector or from control device.

7) Power Input Socket

Plug the power-cord into an AC socket properly conﬁgured for this ﬁxture. Please

read “6.2. Power and Wiring” on page 9 for details.

8) Power Output Socket

POWER OUT socket - Moodwasher 4810WP is equipped with an out power con-

nector to be used as power mains source in case of cascade connection up to a

maximum of 4 ﬁxtures.

1st Unit 3rd Unit2nd Unit

Power Input

100-240Vac - 50/60Hz

up to 4 units

6.2. Power and Wiring

yAlways make sure that the voltage of the outlet to which you are connecting

the product is within the range stated in paragraph “11 - Speciﬁcation” on page

14 or rear panel of the product (AC100V-240V 50/60Hz).

yMake sure the power cord is not crimped or damaged. Never connect this prod-

uct to a dimmer pack or rheostat.

yNever disconnect the product from power cord by pulling or tugging on the cord.

yTo avoid electric shock, all ﬁxtures must be connected to circuits with a suitable

1010

Moodwasher 4810WP User Manual

Eng

ground and circuit breaker.

6.3. Mains Connections

Connect the device to the mains with the supplied power cable. Wire correspon-

dence is as follows:

Cable (EU) Pin International

Brown Live L

Blue Neutral N

Yellow/Green Earth

The earth must to be connected! Pay attention to the safety! Before taking into

operation for the rst time, the installation has to be approved by an expert.

6.4.Dmx Connection

When use a DMX controller, please make sure that there is no interference

sources (e.g. intercom, high frequency radio waves and radiation source).

DMX machines are designed to receive data through a serial Daisy Chain. A Daisy

Chain connection is where the DATA OUT of one ﬁxture connects to the DATA IN of

the next ﬁxture. The order in which the machines are connected is not important

and has no effect on how a controller communicates to each of them. Use an order

that provides for the easiest and most direct cabling.

3-Pin XLR

Pin 1: GND

Pin 2: DMX -

Pin 3: DMX +

OUTPUTINPUT

DMX use of 3-Pin XLR Connectors

DMX Termonator

Unit 1 Unit 2 Last Unit

DMX 512

Connect machines using shielded 2-conductor twisted pair cable with 3-pin XLR

male to female connectors. The shield connection is pin 1, while pin 2 is Data Nega-

tive (S-), and pin 3 is Data positive (S+).

CAUTION: Wires must not come into contact with each other; otherwise the x-

tures will not work at all, or will not work properly.

Inhaltsverzeichnis

Sprachen:

Andere CentoLight Projektor Handbücher

CentoLight

CentoLight SCENIC 100W WW-CW Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung