Central Machinery 97099 Installationshandbuch

METAL CUTTING BANDSAW

7” X 12”

Model

97009

SET UP AND OPERATING INSTRUCTIONS

Diagrams within this manual may not be drawn proportionally.

Due to continuing improvements, actual product may differ slightly from the product described herein.

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.

Page 2SKU 97009 For technical questions, please call 1-800-444-3353.

TABLE OF CONTENTS

Important Safety Information ...................................................................3

General Safety Rules.................................................................................4

Specic Safety Rules.................................................................................6

Grounding...................................................................................................8

Extension Cords.........................................................................................9

Symbology.................................................................................................10

Product Specications.............................................................................10

Set Up Instructions....................................................................................11

Operating Instructions..............................................................................12

Maintenance and Servicing......................................................................25

Troubleshooting Guide.............................................................................29

Parts Lists..................................................................................................30

Assembly Diagrams..................................................................................38

Electrical Schematics...............................................................................43

Warranty Information................................................................................46

Page 3SKU 97009 For technical questions, please call 1-800-444-3353.

SAVE THIS MANUAL

Keep this manual for the safety warnings and precautions, assembly, operating,

inspection, maintenance and cleaning procedures. Write the product’s serial number

in the back of the manual near the assembly diagram (or month and year of purchase if

product has no number). Keep this manual and the receipt in a safe and dry place for

future reference.

IMPORTANT SAFETY INFORMATION

In this manual, on the labeling, and all other information

provided with this product:

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that follow this

symbol to avoid possible injury or death.

DANGER indicates a hazardous situation

which, if not avoided, will result in death or

serious injury.

WARNING indicates a hazardous situation

which, if not avoided, could result in death

or serious injury.

CAUTION, used with the safety alert

symbol, indicates a hazardous situation

which, if not avoided, could result in minor

or moderate injury.

NOTICE is used to address practices not

related to personal injury.

CAUTION, without the safety alert symbol,

is used to address practices not related to

personal injury.

DANGERDANGER

WARNINGWARNING

CAUTIONCAUTION

NOTICENOTICE

CAUTIONCAUTION

Page 4SKU 97009 For technical questions, please call 1-800-444-3353.

GENERAL SAFETY RULES

WARNING! Read all instructions

Failure to follow all instructions listed below may result in electric shock,

re, and/or serious injury. The term “power tool” in all of the warnings listed

below refers to your line-operated (corded) power tool.

SAVE THESE INSTRUCTIONS

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in the

presence of ammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with grounded power tools. Unmodied plugs

and matching outlets will reduce risk of electric shock.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is

grounded.

Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating

a power tool. Do not use a power tool while you are tired or under the

inuence of drugs, alcohol or medication. A moment of inattention while

operating power tools may result in serious personal injury.

Use safety equipment. Always wear eye protection. Safety

equipment such as dust mask, heavy duty work gloves, or

hearing protection used for appropriate conditions will reduce

personal injuries.

Page 5SKU 97009 For technical questions, please call 1-800-444-3353.

Avoid accidental starting. Ensure the switch is in the off-position before

plugging in.

Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewelry or long

hair can be caught in moving parts.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it

was designed.

Do not use the power tool if the switch does not turn it on and off. Any power

tool that cannot be controlled with the switch is dangerous and must be

repaired.

Disconnect the plug from the power source and/or the battery pack from the

power tool before making any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the risk of starting the

power tool accidentally.

Store idle power tools out of the reach of children and do not allow people

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

Use the power tool and accessories in accordance with these instructions

and in the manner intended for the particular type of power tool, taking into

account the working conditions and the work to be performed. Use of the

power tool for operations different from those intended could result in a

hazardous situation.

Service

Have your power tool serviced by a qualied repair person using only

identical replacement parts. This will ensure that the safety of the power tool

is maintained.

Page 6SKU 97009 For technical questions, please call 1-800-444-3353.

SPECIFIC SAFETY RULES

Maintain labels and nameplates on the tool. These carry important safety

information. If unreadable or missing, contact Harbor Freight Tools for a

replacement.

Make sure the Bandsaw is located on a at, level, sturdy surface capable of

supporting the weight of the tool, accessories, and workpieces. Always “chock”

the Wheels to prevent the Bandsaw from accidentally moving.

Make sure the Table of the Bandsaw and surrounding area are clear with the

exception of the workpiece to be cut.

Before using the Bandsaw, check to make sure the Saw Blade is properly

mounted and in good condition.

Never stand on the Bandsaw. Serious injury could result if the Bandsaw is tipped

or if the rotating Saw Blade is accidentally contacted.

Never attempt to cut more than one workpiece at a time.

When cutting a large workpiece, make sure its entire length is properly

supported. If necessary, use a roller stand (not included).

Do not lean on the Bandsaw when the tool is in its upright position.

When moving the Bandsaw, always have its Head lowered to its horizontal

position.

Allow the Saw Blade to rotate to full speed before feeding the Blade into a

workpiece. When turning off the Bandsaw, allow the Saw Blade to spin down

and stop on its own. Do not press against the Saw Blade to stop it.

To avoid injury, always wear ANSI-approved safety goggles and heavy duty work

gloves when changing the Saw Blade.

The Saw Blade becomes hot while cutting. Allow the Blade to completely cool

before handling.

Do not force the Saw Blade into the workpiece when cutting. Apply moderate

pressure, allowing the Blade to cut without being forced.

Turn off the Bandsaw and allow the Saw Blade to completely stop if the Blade is

to be backed out of an incomplete cut.

Never attempt to remove material stuck in the moving parts of the Bandsaw while

it is plugged in and running.

Keep all safety guards in place and in proper working order.

Always adjust and position the Blade Guide Arm before starting the cut.

10.

11.

12.

13.

14.

15.

16.

17.

Page 7SKU 97009 For technical questions, please call 1-800-444-3353.

When cutting magnesium, use soluble oils or emulsions (oil/water mix) as water

only will greatly intensify any accidental magnesium chip re. See your industrial

coolant supplier for specic coolant recommendations when cutting magnesium.

Avoid unintentional starting. Prepare to begin work before turning on the tool.

Do not leave the tool unattended when it is plugged into an electrical outlet. Turn

off the tool, and unplug it from its electrical outlet before leaving.

Use the Vise or other practical ways to secure and support the workpiece to the

Support Plate. Holding the work by hand or against your body is unstable and

may lead to loss of control, and personal injury.

This product is not a toy. Keep it out of reach of children.

The brass components of this product contain lead, a chemical known to the

State of California to cause birth defects (or other reproductive harm). California

Health & Safety Code 25249.5, et seq.)

People with pacemakers should consult their physician(s) before use.

Electromagnetic elds in close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure. In addition, people with

pacemakers should:

• Avoid operating alone.

• Do not use with power switch locked on.

• Properly maintain and inspect to avoid electrical shock.

• Any power cord must be properly grounded. Ground Fault Circuit Interrupter

(GFCI) should also be implemented – it prevents sustained electrical shock.

Some dust created by power sanding, sawing, grinding, drilling, and other

construction activities, contains chemicals known [to the State of California] to

cause cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

Lead from lead-based paints

Crystalline silica from bricks and cement or other masonry products

Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as those dust masks that

are specially designed to lter out microscopic particles. (California Health &

Safety Code § 25249.5, et seq.)

The warnings, precautions, and instructions discussed in this instruction manual

cannot cover all possible conditions and situations that may occur. It must be

understood by the operator that common sense and caution are factors which

cannot be built into this product, but must be supplied by the operator.

18.

19.

20.

21.

22.

23.

24.

25.

26.

Page 8SKU 97009 For technical questions, please call 1-800-444-3353.

SAVE THESE INSTRUCTIONS.

GROUNDING

Improperly connecting the grounding wire can result in

electric shock.

Check with a qualied electrician if you are in doubt as to

whether the outlet is properly grounded. Do not modify

the power cord plug provided with the tool. Never remove

the grounding prong from the plug. Do not use the tool if

the power cord or plug is damaged. If damaged, have it

repaired by a service facility before use. If the plug will not

t the outlet, have a proper outlet installed by a qualied

electrician.

Grounded Tools: Tools with Three Prong Plugs

Tools marked with “Grounding Required” have a three wire cord and three prong

grounding plug. The plug must be connected to a properly grounded outlet. If

the tool should electrically malfunction or break down, grounding provides a low

resistance path to carry electricity away from the user, reducing the risk of electric

shock. (See 3-Prong Plug and Outlet.)

The grounding prong in the plug is connected through the green wire inside the

cord to the grounding system in the tool. The green wire in the cord must be the

only wire connected to the tool’s grounding system and must never be attached

to an electrically “live” terminal. (See 3-Prong Plug and Outlet.)

The tool must be plugged into an appropriate outlet, properly installed and

grounded in accordance with all codes and ordinances. The plug and outlet

should look like those in the following illustration.

(See 3-Prong Plug and Outlet.)

3-Prong Plug and Outlet Outlets for 2-Prong Plug

WARNINGWARNING

Page 9SKU 97009 For technical questions, please call 1-800-444-3353.

Double Insulated Tools: Tools with Two Prong Plugs

Tools marked “Double Insulated” do not require grounding. They have a special

double insulation system which satises OSHA requirements and complies

with the applicable standards of Underwriters Laboratories, Inc., the Canadian

Standard Association, and the National Electrical Code.

(See Outlets for 2-Prong Plug.)

Double insulated tools may be used in either of the 120 volt outlets shown in the

preceding illustration. (See Outlets for 2-Prong Plug.)

EXTENSION CORDS

Grounded tools require a three wire extension cord. Double Insulated tools can

use either a two or three wire extension cord.

As the distance from the supply outlet increases, you must use a heavier gauge

extension cord. Using extension cords with inadequately sized wire causes a

serious drop in voltage, resulting in loss of power and possible tool damage.

(See Table A.)

The smaller the gauge number of the wire, the greater the capacity of the cord.

For example, a 14 gauge cord can carry a higher current than a 16 gauge cord.

(See Table A.)

When using more than one extension cord to make up the total length, make

sure each cord contains at least the minimum wire size required. (See Table A.)

If you are using one extension cord for more than one tool, add the nameplate

amperes and use the sum to determine the required minimum cord size.

(See Table A.)

If you are using an extension cord outdoors, make sure it is marked with the

sufx “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use.

Make sure the extension cord is properly wired and in good electrical condition.

Always replace a damaged extension cord or have it repaired by a qualied

electrician before using it.

Protect the extension cords from sharp objects, excessive heat, and damp or wet

areas.

Page 10SKU 97009 For technical questions, please call 1-800-444-3353.

RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120/240 VOLT)

NAMEPLATE

AMPERES

(at full load)

EXTENSION CORD LENGTH

25 Feet 50 Feet 75 Feet 100 Feet 150 Feet

0 – 2.0 18 18 18 18 16

2.1 – 3.4 18 18 18 16 14

3.5 – 5.0 18 18 16 14 12

5.1 – 7.0 18 16 14 12 12

7.1 – 12.0 18 14 12 10 -

12.1 – 16.0 14 12 10 - -

16.1 – 20.0 12 10 - - -

TABLE A * Based on limiting the line voltage drop to ve volts at 150% of the rated amperes.

SYMBOLOGY

Double Insulated V~ Volts Alternating Current

Canadian Standards Association AAmperes

Underwriters Laboratories, Inc. n0xxxx/min. No Load Revolutions per Minute

(RPM)

SPECIFICATIONS

Electrical Requirements 120 V~ / 60 Hz / 16 Amps

1 HP Single Phase Motor / 1720 RPM

Power Switch Type: Toggle

Circuit Breaker: 18 Amps (Resettable)

Power Cord Type: 14 AWG x 3C

Plug Type: 120 Volt / 3-Prong / Grounded

Stock Capacity at 90° 7” (Round) / 7” x 12” (Rectangle)

Blade Speeds

(Feet Per Minute)

90 FPM / 135 FPM / 195 FPM / 255 FPM

Blade Size

Teeth Per Inch

0.75” x 0.031” x 93” (Carbon Steel Blade)

6 TPI

Belt Type 3V-270

Miter Slot Width / Depth 11/16” Wide / 9/16” Deep

Hydraulic Ram Travel 5-5/8”

Base Mounting Holes 3/8” Diameter (Qty. 4)

Wheel Dimensions 5” Diameter x 1” Wide

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Central Machinery Gesehen Handbücher

Central Machinery

Central Machinery 94443 Bedienungsanleitung

Central Machinery

Central Machinery 93012 Bedienungsanleitung

Central Machinery

Central Machinery 93762 Bedienungsanleitung

Central Machinery

Central Machinery 32208 Installationshandbuch

Central Machinery

Central Machinery 93507 Bedienungsanleitung

Central Machinery

Central Machinery 63469 Montageanleitung

Central Machinery

Central Machinery 67595 Installationshandbuch

Central Machinery

Central Machinery 93012 Montageanleitung

Central Machinery

Central Machinery 93012 Bedienungsanleitung

Central Machinery

Central Machinery 32206 Betriebsanleitung

Central Machinery

Central Machinery 62519 Montageanleitung

Central Machinery

Central Machinery 04333 Bedienungsanleitung

Central Machinery

Central Machinery 03179 Bedienungsanleitung

Central Machinery

Central Machinery 61712 Bedienungsanleitung

Central Machinery

Central Machinery 45804 Bedienungsanleitung

Central Machinery

Central Machinery 93762 Installationshandbuch

Central Machinery

Central Machinery 46813 Kurzanleitung

Central Machinery

Central Machinery 41889 Kurzanleitung

Central Machinery

Central Machinery 99553 Installationshandbuch

Central Machinery

Central Machinery 60500 Montageanleitung

Central Machinery

Central Machinery 95112 Stücklistenhandbuch

Central Machinery

Central Machinery 60564 Montageanleitung

Central Machinery

Central Machinery 90597 Bedienungsanleitung

Central Machinery

Central Machinery 46813 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

IMET Spa

IMET Spa BASIC 300 PLUS SHI Bedienungsanleitung

IMET Spa

IMET Spa SIRIO 370 AF-E Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung