INTRODUCTION
The Model 730-1 is an operationally simple, compact, microprocessor controlled,
dot-matrix, impact printer. The unit prints 7x7 dot matrix characters at 10
characters per inch in line lengths up to 8inches at arate of 100 characters
per second. The printer features three-way paper handling.
1. 9-1/2" (9" pin to pin) wide standard computer fanfold forms, with fixed
position pins to ensure pinfeed paper registration. The paper can be
multipart up to three parts.
2. Rolled paper, 3-1/2 to 8-1/2- wide, 1" core and up to 5" diameter. The
printer includes aroll paper holder. Abuilt-in rip-and-read cutting
edge allows easy removal of paper. The first line of following page is
printed within five lines of tear edge. Two ply paper may be used with
operator attendance.
3. Single sheets of 8-1/2 inch wide paper, hand fed as with an ordinary
typewriter.
The printer's character set consists of 96 US ASCII characters. Normal size
characters can be printed at up to 80 characters per line. Elongated characters
which are double-width characters can be printed at up to 40 characters per line
Other significant features include:
1. Reliable free-flight head.
2. Microprocessor technology.
3. Full line buffer.
4. Fast carriage return at 10" per second.
5. Special line feed buffer for host-controlled forms control.
6. Compact size (5"H x14-1/2"W x11 MD).
-1-
