Challenger APFW10 Bedienungsanleitung

APFW10 wireless module operating manual

Operating Manual

Easy Set Module APFW10

APFW10 wireless module operating manual

Table of Contents

1. Features

....................................................................................................................3

2. Overview

..................................................................................................................3

3. Wiring diagram

.............................................................................................4

4. E tending the System

.......................................................................5

5. Installing the unit

....................................................................................6

6. Wireless Detectors Learning

..................................................7

7. Using the system

.......................................................................................8

8. Summary of LED Response

.......................................................9

9. Specification

......................................................................................................9

APFW10 wireless module operating manual

1. Features

 Allow the AP11 alarm control panel become wireless alarm system

 Link to 20 wireless P R(ADFW1)/wireless Magnetic Contact(ACFW1) and

4 Wireless remote keys (AUWFOB) in maximum

 Arm and disarm alarm by remote key

 Power up by Alarm Control Unit, no extra power source is needed

 Status LED indication

 Tamper protection

 Anti-jamming detection

 Detectors low battery detection

 Detectors Supervision



Alert buzzer

2. Overview

1 – RJ45 Socket

2 – Zone indicating LED

3 – Zone Select Button

4 – Learn Button

5 – RF Module

6 – Power LED

APFW10 wireless module operating manual

3. Wiring diagram

Easy Set module APFW10 connect with Force-10 AP11 alarm control panel

Green

Blue

Orange

White/Green

White/Blue

White/Brown

Brown Green

Blue

Orange

White/Orange

Brown

White/Orange

White/Green

White/Blue

White/Brown

APFW10 wireless module operating manual

4. E tending the System

A number of accessories are available to extend your system to suit your

exact requirements. When extending the system, please note the system

can take up to 20 wireless P R(ADFW1)/wireless Magnetic Contact(ACFW1)

and 4 Wireless remote keys (AUWFOB) in maximum

Wireless PIR (ADFW1)

– easy to install, one unit protects a large area.

Wireless Magnetic Contact (ACFW1)

– easy to fit, detects opening of a door or window, can be

extended by the addition of wired magnetic contact.

Wireless Remote Key (AUWFOB)

– can be used to arm, part-arm, disarm or panic the CU

system with an operating range of about 60 meters in open

field conditions..

APFW10 wireless module operating manual

5. Installing the unit

APFW10 wireless module operating manual

6. Wireless Detectors Learning

How to go into learn mode

Press Learn button on APFW10 board, it gives one beep, then yellow LED is

on to indicate learn mode now after release off.

How to learn a valid pin of control panel from wiring remote keypad.

The APFW10 acts as if the user has entered a valid P N code. To achieve this,

the system needs to learn the P N code. Under learn mode, nput 4 - digital key,

Red LED on APFW10 board will flash fast twice and give two beeps to indicate

OK.

How to register wireless detector into RXC module.

Under learn mode, trigger unregistered wireless detector, Red LED on

APFW10 board will flash fast twice and give two beeps to indicate OK. The

APFW10 will be ready to learn the next wireless detector. A zone LED will jump

to next zone LED indicate when it has learnt 2 detector. The APFW10 may

by two detectors ). t will exit learn mode when unregistered wireless detector

has not signal over 10 second and doesn’t receive any hit button signal from

other wiring remote keypad.

How to register wireless remote key into APFW10 module.

Under learn mode, press any key on unregistered wireless remote key, Red

LED on APFW10 board will flash fast twice and give two beeps to indicate OK.

The APFW10 will be flash the yellow LED and ready to learn the next wireless

remote key. The APFW10 may register maximum four wireless remote keys. t

will exit learn mode when unregistered wireless detector and wireless remote

key have not signal over 10 second and doesn’t receive any hit button signal

from other wiring remote keypad.

APFW10 wireless module operating manual

7. Using the system

How to set control panel going into FULL ARM, PART ARM via

wireless remote key?

Under system is DAY mode, press [ FULL ARM ] or [ PART ARM ]button of

registered remote key, control panel will go into FULL or PART mode with

delay a little time.

How to set control panel into OFF MODE via wireless remote key?

Under system is ARM mode, press [ D SARM ] of registered remote key,

control panel will return to OFF mode at once.

What to do if PIN code in alarm panel changed.

When the original user P N code in the control panel is changed, you

must relearn the P N code. (See section 6) We suggest programming a

different user code for the APFW10 than the standard user code. (2 user

codes plus a manager code can be programmed in panel)

How to clear valid pin and register wireless detector/device to restore

factory default setting?

n normal mode (Green LED on), Press button on APFW10 board for more

than 6 seconds, APFW10 gives two beeps when factory default completed.

Then release button

When do supervisor signal appear for APFW10 ?

System indicates message:

Below is Zone LED status when Wireless detector trigger.

Detector Action Zone LED Status

P R trigger Light on about 2 seconds

MC open ON

MC close OFF

Tamper from P R or MC Light on about 2 seconds

Missed zone(No supervision signal) Light on about 2 seconds

APFW10 wireless module operating manual

8. Summary of LED Response

Below is double colour LED indicating status

Status

colour Light on Flash twice Slow flash

Green Normal mode Low battery

Red Supervisor Learn ok Anti-Jamming

Yellow Learn

mode(P R&MC) Learn mode(key)

When APFW10 working in learn mode, Z1 LED – Z10 LED indicate status:

LED flash slowly hint ready to learn the first detector to zone, LED flash fast hint

to learn the second detector, while LED light on indicate the zone be learned.

n Learn mode, APFW10 Learning Key status & P R, MC status toggle

automatically when the rx signal enter.

Note: f APFW10 miss detector or doesn’t receive supervisor signal of any

detector, then it light on the corresponding zone LED about 2 seconds.

9. Specification

Housing ABS

Dimension 15

100

30mm

；

5-7/8in

3-15/16in

1-3/16in

Power Supply: DC 9V to 14V

Standby 20mACurrent Consumption:

Alarm 100mA

Security Wireless Zones: Up to 20PCS

User Remote Key: Up to 4PCS

Radio System:

433MHz AM Receiver

Wireless MC,PIR Range:

Up to 160 m

Wireless remote key 50m

Anti-jamming Yes

Tamper: Yes

Supervision: Yes

PA: Yes

Ambient Operating temperature: 0

℃

to 40

℃

Note : Default D address of APFW10 is 0x04 (no jump setting).

APFW10 wireless module operating manual

Distributed by;

Challenger Security Products

4 Arkwright Court,

Fylde ndustrial Estate

Blackpool

FY4 5DR

Tel: 01253 792898

Fax: 01253 791887

Email: Enquiries.challenger@adivision.co.uk

Web: www.challenger.co.uk

Inhaltsverzeichnis

Andere Challenger Sicherheitssystem Handbücher

Challenger

Challenger Smart Force ASFSB Bedienungsanleitung

Challenger

Challenger SE801 Bedienungsanleitung

Challenger

Challenger AT60 Bedienungsanleitung

Challenger

Challenger APFWKGSM Bedienungsanleitung

Challenger

Challenger SMART FORCE Bedienungsanleitung

Challenger

Challenger AKWK1 Bedienungsanleitung

Challenger

Challenger ADWC Bedienungsanleitung

Challenger

Challenger AP10LED Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung