Chamberlain 8550W Bedienungsanleitung

Please write the MyQ Serial number in the box above. See page 2.

Wi-Fi Garage Door Opener

USER’S GUIDE

•Please read this guide and the enclosed safety materials carefully!

•The door WILL NOT CLOSE unless the Protector System®

is connected and properly aligned.

•Periodic checks of the garage door opener are required to ensure

safe operation.

•This garage door opener is ONLY compatible with MyQ®

and Security+ 2.0™ accessories.

•DO NOT enable the Timer-to-Close feature if you are installing the

garage door opener on a one-piece door. The Timer-to-Close is to

be used ONLY with sectional doors.

•Attach enclosed warning labels to the location indicated on label.

SERIAL NUMBER:

www.prodregister.com/LiftMaster

FOR RESIDENTIAL USE ONLY

MODELS 8550W • 8557W • 8587W

2For the complete manual visit LiftMaster.com/Customer-Support

Contents

Important Safety Instructions .............................3-4

Programming ...............................................5-7

Connect your Garage Door Opener to Your Smart

Phone .....................................................5-6

Remote Control ............................................ 7

Erase the Memory......................................... 7

Operation................................................... 8-10

To Open the Door Manually.............................. 8

Battery Backup............................................. 9

The Door Control .......................................... 9

The Protector System®(Safety Reversing Sensors) 10

Adjustment................................................11-13

Introduction ...............................................11

Program the Travel.......................................12

Test the Safety Reversal System.......................13

Test the Protector System®.............................13

Maintenance..................................................14

Troubleshooting..............................................14

Repair Parts ..................................................15

Warranty ......................................................16

Safety Symbol and Signal Word

Review

This garage door opener has been designed and tested

to offer safe service provided it is installed, operated,

maintained and tested in strict accordance with the

instructions and warnings contained in this manual.

When you see these Safety Symbols and Signal Words on

the following pages, they will alert you to the possibility

of serious injury or death if you do not comply with the

warnings that accompany them. The hazard may come

from something mechanical or from electric shock. Read

the warnings carefully.

Unattended Operation

The Timer-to-Close (TTC) feature, the MyQ®Smartphone

Control app, and MyQ®Garage Door and Gate Monitor are

examples of unattended close and are to be used ONLY

with sectional doors. Any device or feature that allows the

door to close without being in the line of sight of the door

is considered unattended close. The Timer-to-Close (TTC)

feature, the MyQ®Smartphone Control, and any other

MyQ®devices are to be used ONLY with sectional doors.

Mechanical

Electrical

When you see this Signal Word on the following pages, it

will alert you to the possibility of damage to your garage

door and/or the garage door opener if you do not comply

with the cautionary statements that accompany it. Read

them carefully.

Date of Purchase:

Product Serial Number

Write down the following information for future reference:

Product S/N:

Accessory Setup Code:

MyQ®Serial Number:

Serial Number:

IMPORTANT INSTALLATION INSTRUCTIONS

To reduce the risk of SEVERE INJURY or DEATH:

WARNING

1. READ AND FOLLOW ALL WARNINGS AND

INSTRUCTIONS.

2. Install garage door opener ONLY on properly

balanced and lubricated garage door. An

improperly balanced door may NOT reverse when

required and could result in SEVERE INJURY or

DEATH.

3. ALL repairs to cables, spring assemblies and

other hardware MUST be made by a trained door

systems technician BEFORE installing opener.

4. Disable ALL locks and remove ALL ropes

connected to garage door BEFORE installing

opener to avoid entanglement.

5. Install garage door opener 7 feet (2.13 m) or more

above ﬂoor.

6. Mount the emergency release within reach, but at

least 6 feet (1.83 m) above the ﬂoor and avoiding

contact with vehicles to avoid accidental release.

7. NEVER connect garage door opener to power

source until instructed to do so.

8. NEVER wear watches, rings or loose clothing

while installing or servicing opener. They could be

caught in garage door or opener mechanisms.

9. Install wall-mounted garage door control:

• within sight of the garage door.

• out of reach of children at minimum height of

5 feet (1.5 m).

• away from ALL moving parts of the door.

10. Place entrapment warning label on wall next to

garage door control.

11. Place manual release/safety reverse test label in

plain view on inside of garage door.

12. Upon completion of installation, test safety reversal

system. Door MUST reverse on contact with a

1-1/2" (3.8 cm) high object (or a 2x4 laid ﬂat) on

the ﬂoor.

13. To avoid SERIOUS PERSONAL INJURY or DEATH

from electrocution, disconnect ALL electric and

battery power BEFORE performing ANY service or

maintenance.

14. DO NOT install on a one-piece door if using devices

or features providing unattended close. Unattended

devices and features are to be used ONLY with

sectional doors.

15.

SAVE THESE

INSTRUCTIONS.

Important Safety Instructions

4For the complete manual visit LiftMaster.com/Customer-Support

Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of SEVERE INJURY or DEATH:

WARNING

1. READ AND FOLLOW ALL WARNINGS AND

INSTRUCTIONS.

2. ALWAYS keep remote controls out of reach of

children. NEVER permit children to operate or play

with garage door control push buttons or remote

controls.

3. ONLY activate garage door when it can be seen

clearly, it is properly adjusted, and there are no

obstructions to door travel.

4. ALWAYS keep garage door in sight and away from

people and objects until completely closed. NO

ONE SHOULD CROSS THE PATH OF THE MOVING

DOOR.

5. NO ONE SHOULD GO UNDER A STOPPED,

PARTIALLY OPENED DOOR.

6. If possible, use emergency release handle to

disengage trolley ONLY when garage door is

CLOSED. Use caution when using this release

with the door open. Weak or broken springs or

unbalanced door could result in an open door

falling rapidly and/or unexpectedly and increasing

the risk of SEVERE INJURY or DEATH.

7. NEVER use emergency release handle unless

garage doorway is clear of persons and

obstructions.

8. NEVER use emergency release handle to pull

garage door open or closed. If rope knot becomes

untied, you could fall.

9. After ANY adjustments are made, the safety

reversal system MUST be tested.

10. Safety reversal system MUST be tested every

month. Garage door MUST reverse on contact with

1-1/2" high (3.8 cm) object (or a 2x4 laid ﬂat) on

the ﬂoor. Failure to adjust the garage door opener

properly increases the risk of SEVERE INJURY or

DEATH.

11. ALWAYS KEEP GARAGE DOOR PROPERLY

BALANCED. An improperly balanced door may NOT

reverse when required and could result in SEVERE

INJURY or DEATH.

12. ALL repairs to cables, spring assemblies and

other hardware, ALL of which are under EXTREME

tension, MUST be made by a trained door systems

technician.

13. ALWAYS disconnect electric power to garage door

opener BEFORE making ANY repairs or removing

covers.

14. This operator system is equipped with an

unattended operation feature. The door could move

unexpectedly. NO ONE SHOULD CROSS THE PATH

OF THE MOVING DOOR.

15. DO NOT install on a one-piece door if using devices

or features providing unattended close. Unattended

devices and features are to be used ONLY with

sectional doors.

16.

SAVE THESE

INSTRUCTIONS.

Test the Wi-Fi®Signal Strength

Make sure your mobile device is connected to your Wi-Fi network. Hold your mobile device in the place where your

garage door opener will be installed and check the Wi-Fi signal strength.

Before You Begin

You will need:

• Wi-Fi enabled smartphone, tablet or laptop

• Broadband Internet Connection

• Wi-Fi®signal in the garage

• Password for your home network

• MyQ Serial number (Provided during step 3 and located on the garage door opener.)

Check Signal Strength. If you see:

Wi-Fi signal is strong.

The garage door opener will connect to your

Wi-Fi network.

Wi-Fi signal is weak.

The garage door opener may connect to your Wi-Fi network. If

not, try one of the options below to improve the Wi-Fi signal:

No Wi-Fi signal.

The garage door opener will not be able to connect to your

Wi-Fi network. Try one of the options below to improve the

Wi-Fi signal:

• Move your router closer to the garage door opener to minimize

interference from walls and other objects

• Buy a Wi-Fi range extender

Visit WiFiHelp.LiftMaster.com for more details

Proceed to page 6.

Connect With Your Smartphone

6For the complete manual visit LiftMaster.com/Customer-Support

Connect With Your Smartphone

Connect Your Garage Door Opener to Your Smartphone

Get connected and control your garage door opener with the MyQ®App.

1. Use the Smart Control Panel®, navigate to Menu > Program > Wi-Fi Setup

or press and release the yellow LEARN button on the garage door opener 3 times.

The garage door opener will beep once and a blue LED will blink on and off.

2. On your mobile device, go to Settings > Wi-Fi

and select the network with the “MyQ-” preﬁx.

3. Launch the web browser (Safari®or ChromeTM)

on your smartphone or tablet.

Enter setup.myqdevice.com into the browser

address bar. Follow the on screen prompts to

connect the garage door opener to your Wi-Fi

network. The MyQ serial number will display

in the app. Write serial number in area provided

on front cover of user's guide.

4. Download the MyQ app from the App StoreSM or

Google Play™ store. Sign up for your MyQ

account and add the MyQ serial number to

your account.

5. If you need help adding devices to your MyQ

account, visit WiFiHelp.LiftMaster.com Smart Control Panel®

Programming

Remote Control

Wireless Keyless Entry

1. Press and release the

LEARN Button on the

garage door opener.

2. Press the button on the

remote control.

Erase ALL Remote Controls and Keyless Entries

Select Menu > Program > Remote and

follow the on screen prompts.

To Erase the Memory

LEARN

Button

Black Adjustment Button

Press and hold the LEARN button

until the LED goes out

(approximately 6 seconds).

All remote controls and

keyless entries are now erased.

Erase the Wi-Fi Network from the

Garage Door Opener

Press and hold the black adjustment

button until 3 beeps are heard

(approximately 6 seconds).

Erase a MyQ®Account

Go to myLiftMaster.com to delete your MyQ account.

Erase ALL Devices

(Including MyQ®enabled accessories)

1. Press and hold the LEARN button until the LED

goes out (approximately 6 seconds).

2. Immediately press and hold the LEARN button

until the LED goes out. All codes are now erased.

If your vehicle is equipped with a Homelink®,

you may require an external adapter depending

on the make, model, and year of your vehicle.

Visit www.homelink.com for additional information.

Below are the steps to program a new or existing

remote control. Test remote control before

reprogramming.

Refer to the instructions which were provided with your

keyless entry product.

8For the complete manual visit LiftMaster.com/Customer-Support

To Open the Door Manually

1. The door should be fully

closed if possible.

2. Pull down on the emergency

release handle.

Lockout Feature

1. Pull the emergency release

handle down and back. The

door can then be raised and

lowered manually as often as

necessary.

2. To disengage the lockout

feature, pull the handle

straight down.

The trolley will reconnect on the

next time the opener is activated.

Operation

To prevent possible SERIOUS INJURY or DEATH from a

falling garage door:

• If possible, use emergency release handle to

disengage trolley ONLY when garage door is

CLOSED. Weak or broken springs or unbalanced

door could result in an open door falling rapidly and/

or unexpectedly.

• NEVER use emergency release handle unless garage

doorway is clear of persons and obstructions.

• NEVER use emergency release handle to pull door

open or closed. If rope knot becomes untied, you

could fall.

Push Bar:

Door Control

Open/Close garage door.

Navigation Buttons:

Access menu:

Clock Setup, Timer-to-Close,

Lock, Program, Temperature,

Language, Light Settings,

Contrast Adjust,

Maintenance Alert System,

and Wi-Fi Setup*.

Motion Sensor

Light Button

Battery Backup (If applicable)

Battery Status LED

• Solid green LED - Charged battery

• Flashing green LED - Charging battery

• Solid orange LED with beep - Operating

on battery power

• Flashing orange LED with beep - Low

battery

• Solid red LED with beep - Replace battery

The battery backup allows access in and out of your garage,

when the power is out. When the garage door opener is

operating on battery power, the garage door opener will run

slower and the lights, Timer-to-Close, and remote close

features are disabled. During a power outage the battery

supplies power for one to two days of operation. For

maximum battery life and prevent damage, disconnect the

battery when the garage door opener is unplugged for an

extended period of time.

*The garage door opener must run through a complete

cycle before it will activate Wi-Fi programming. For

help related to Wi-Fi, visit WiFiHelp.LiftMaster.com.

10 For the complete manual visit LiftMaster.com/Customer-Support

Operation

The Protector System®(Safety Reversing Sensors)

Be sure power is NOT connected to the garage door

opener BEFORE installing the safety reversing sensor.

To prevent SERIOUS INJURY or DEATH from closing

garage door:

• Correctly connect and align the safety reversing

sensor. This required safety device MUST NOT be

disabled.

• Install the safety reversing sensor so beam is NO

HIGHER than 6" (15 cm) above garage ﬂoor.

The safety reversing sensors must be connected and

aligned correctly before the garage door opener will

move in the down direction.

When the light beam is obstructed or misaligned while the

door is closing, the door will reverse and the garage door

opener lights will ﬂash ten times. If the door is already

open, it will not close.

The sensors can be aligned by loosening the wing nuts,

aligning the sensors, and tightening the wing nuts. Check

to make sure the LEDs in both sensors are glowing

steadily. The LEDs in both sensors will glow steadily if they

are aligned and wired correctly.

Safety Reversing Sensor

6" (15 cm) max. above floor

Safety Reversing Sensor

6" (15 cm) max. above floor

Green LED

Amber LED

(invisible light beam)

Andere Handbücher für 8550W

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chamberlain Garagentoröffner Handbücher

Chamberlain

Chamberlain LiftMaster CSL24V Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster Premium 8355 Bedienungsanleitung

Chamberlain

Chamberlain CLSS1 Bedienungsanleitung

Chamberlain

Chamberlain CR625EVO Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster CSL24V Bedienungsanleitung

Chamberlain

Chamberlain 882LMW Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster 2500 Bedienungsanleitung

Chamberlain

Chamberlain Merlin MT800 Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster PROFESSIONAL LM60 Series Bedienungsanleitung

Chamberlain

Chamberlain 2585 3/4 HP Bedienungsanleitung

Chamberlain

Chamberlain RJO20 Bedienungsanleitung

Chamberlain

Chamberlain B4655T Bedienungsanleitung

Chamberlain

Chamberlain Power Drive Security+ PD752CD Bedienungsanleitung

Chamberlain

Chamberlain Whisper Drive Security+ 248739 Bedienungsanleitung

Chamberlain

Chamberlain door opener Bedienungsanleitung

Chamberlain

Chamberlain LM800A Bedienungsanleitung

Chamberlain

Chamberlain MGJ Bedienungsanleitung

Chamberlain

Chamberlain 535LM Bedienungsanleitung

Chamberlain

Chamberlain ELITE Series Bedienungsanleitung

Chamberlain

Chamberlain Whisper Drive SECURITY+ WD822K Series Bedienungsanleitung

Chamberlain

Chamberlain Power Drive Security+ PD612CS Bedienungsanleitung

Chamberlain

Chamberlain PRO8000 Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster LM60 Bedienungsanleitung

Chamberlain

Chamberlain Elite 3585C Bedienungsanleitung

Beliebte Garagentoröffner Handbücher anderer Marken

Dorma

Dorma ES 90 Bedienungsanleitung

Garaga

Garaga SECURITY+ 3265GCM 1HP Bedienungsanleitung

Chase Doors

Chase Doors DuraShield Bedienungsanleitung

CSI

CSI Classic Bedienungsanleitung

HATO

HATO 120 Bedienungsanleitung

Richmond

Richmond GTR156 Bedienungsanleitung

Raynor

Raynor 1280RGD Bedienungsanleitung

CAME

CAME F4000 Series Bedienungsanleitung

B&D

B&D Controll-A-Door 5 Bedienungsanleitung

BFT

BFT PRV AA SL Bedienungsanleitung

Craftsman

Craftsman 139.53924 Bedienungsanleitung

Automatic Technology

Automatic Technology GDO-9V1 SecuraLift Bedienungsanleitung

Westfalia

Westfalia 19 36 07 Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung

Craftsman

Craftsman 139.53997D Bedienungsanleitung

Bauer

Bauer CROSS18 Bedienungsanleitung

Wayne-Dalton

Wayne-Dalton 8124 Kurzanleitung

Craftsman

Craftsman 139.18867 Bedienungsanleitung