Chamberlain MyQ Retrofit 888LM Bedienungsanleitung

LiftMaster MyQ Retrofit (888LM + 828LM) Installation Guide

Required items for installations

Garage door compatibility

MyQ Control Panel (888LM)

MyQ Internet Gateway (828LM)

Compatible door opener

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

Opener Quick ID

LiftMaster compatible brands made after 1998

LiftMaster, Chamberlain, Sears/Craftsman, Raynor and

Access opener.

ALL with a purple learn button with purple antenna wire.

MOST with an orange/red learn button with gray antenna

wire. The following models are incompatible:

• Models 2500 & 2500C (2500B and 2500BC are

compatible)

• 1000SDR

• 2000SDR

For a full list of compatible garage door openers, see

Complete list of compatible garage doors.

Install MyQ Control Panel (888LM)

1. Disconnect all electrical power to the garage door opener.

2. Remove the existing door control from the wall. ote the polarity of the wires connected to the existing door

control. Label the wires appropriately (Red/White).

3. Disconnect the wires from the existing door control.

4. Connect the wires to the new MyQ Control Panel.

5. Mount the MyQ Control Panel to the wall.

6. Reconnect power. The yellow command LED (in the center of the MyQ Control Panel) and the red learn LED

(above the learn button) blink quickly for up to five minutes as the MyQ Control Panel recharges. When the MyQ

Control Panel is operational, the yellow command LED is solid.

7. Test the MyQ Control Panel. Press the push bar to activate the garage door opener.

8. Connect to LiftMaster Internet Gateway using the following instructions.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

Connect LiftMaster Internet Gateway

1. Connect Ethernet cable to router and the internet gateway.

2. Connect power to the internet gateway.

3. When the internet gateway connects to the internet, the green light stops blinking and lights solid. If the green light

does not light solid, check the power, router, and internet connections to the internet gateway.

4. Write down the serial number on the gateway to be used in the registration process

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

828LM LED guide

LED color Description

Green blinking

The Gateway has an IP address

from the router, but is not connected

to the internet.

Green solid

The Gateway has an active internet

connection. Infrequent blinking

indicates data traffic.

Blue solid

The Gateway has learned at least

one MyQ device. The blue light

infrequently blinks to indicate

communication in progress with

MyQ device.

Yellow solid

The Gateway is actively waiting to

learn a MyQ device. This timeouts

after three minutes if a device is not

learned.

Note: The Internet Gateway cannot be registered through Alarm.com if it is already registered through MyQ/LiftMaster.

The Internet Gateway must be removed from the user's MyQ account before attempting to register it to Alarm.com.

There are three different ways to register the Internet Gateway with Alarm.com. It can be registered using the Dealer

Website, MobileTech app, or Customer Website.

Option 1: Register the Internet Gateway using the Dealer Website

1. Log into the Dealer Website.

2. Find the customer account.

3. Verify the Service Package includes Garage Door Control and LiftMaster Integration.

◦ To verify the Service Package:

a. Click Service Package.

b. Click Change Service Package.

c. Under Energy Management & Automation, verify Garage Door Control and LiftMaster Integration are

selected as add-ons to the account's service package.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

4. Click Equipment.

5. Click emPower Devices.

6. Click LiftMaster.

7. Click Add Gateway.

8. In the Serial Number field, enter the 828LM Internet Gateway’s serial number.

9. After a few minutes, the LiftMaster equipment page should show the Internet Gateway in the equipment list.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

10. On the LiftMaster equipment page, click Add Device under Device Commands for the Internet Gateway to add a

garage door opener to. This puts the Internet Gateway into learn mode so that MyQ Control Panel (888LM) can be

added. A yellow light should turn on at the 828LM Internet Gateway.

Note: If the yellow light does not turn on, click Update Device List & Statuses on the LiftMaster equipment page,

wait one minute, and then try Learn Mode again.

11. After the yellow light is on at 828LM Internet Gateway, go to the MyQ Control Panel (888LM) and push the learn

button twice.

◦ On the 888LM Control Panel, the red LED turns on.

◦ On the 828LM Internet Gateway, the LED turns blue once the device is learned in.

12. On the LiftMaster equipment page, click Update Device List & Statuses. This retrieves the MyQ Control Panel to

link it to the Alarm.com system, and it should appear on the LiftMaster equipment page.

Option 2: Register the Internet Gateway using the MobileTech app

1. Log into the MobileTech app.

2. Find the customer account.

3. Verify the Service Package includes Garage Door Control and LiftMaster Integration.

◦ To verify the Service Package:

a. Tap .

b. Tap Package.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

c. Verify Garage Door Control and LiftMaster Integration are selected as add-ons to the account's service

package.

4. Tap Equipment.

5. Tap LiftMaster Devices.

6. Tap Add Gateway.

7. In the Serial Number field, enter the 828LM Internet Gateway’s serial number.

8. After a few minutes, the LiftMaster equipment page should show the Internet Gateway in the equipment list.

9. On the LiftMaster equipment page, tap the Internet Gateway to add a garage door opener to, then tap Learn

Mode and select the desired device. This puts the Internet Gateway into learn mode so that MyQ Control Panel

(888LM) can be added. A yellow light turns on at the 828LM Internet Gateway to indicate that it's in learn mode.

Note: If the yellow light does not turn on, tap Update Device List & Statuses on the LiftMaster equipment page,

wait one minute, and then try Learn Mode again.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

10. After the yellow light is on at 828LM Internet Gateway, go to the MyQ Control Panel (888LM) and push the learn

button twice.

◦ On the 888LM Control Panel, the red LED turns on.

◦ On the 828LM Internet Gateway, the LED turns blue once the device is learned in.

11. On the LiftMaster equipment page, tap Update Device List & Statuses. This retrieves the MyQ Control Panel to

link it to the Alarm.com system, and it should appear on the LiftMaster equipment page.

Option 3: Register the Internet Gateway using the Customer Website

1. Verify the LiftMaster add-on has been added to the customer’s service package.

2. Log into the Customer Website.

3. Click Settings.

4. Click Devices.

5. In Automation Devices, click + LiftMaster Installation.

6. In the Serial Number field, enter the serial number of the Internet Gateway, and then click Continue.

7. Click Add New Device to put the Internet Gateway into learn mode.

8. After the yellow light is on at the Internet Gateway, go to the MyQ Control Panel (888LM) and push the learn

button twice.

◦ On the 888LM Control Panel, the red LED turns on.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

◦ On the 828LM Internet Gateway, the LED turns blue once the device is learned in.

9. Return to the Garage page and click Check for New Devices.

10. Repeat steps 6-9 if initially unsuccessful. Also, verify the model number of the garage door opener to verify it is

compatible. For a full list of compatible garage door openers, see Complete list of compatible garage doors.

Troubleshooting

• If the yellow command LED does not turn on, reverse the wires connected to the R and W terminals of the control

panel. Replace the wire if necessary.

• If yellow and red LEDs blink slowly, the control panel is not compatible with the garage door opener.

• If the yellow and red LEDs blink quickly, the control panel is charging, and may take up to five minutes to become

operational.

• MyQ gateway Learn Mode is active for three minutes during which time devices associated with that gateway is

inoperable.

Factory reset the Internet Gateway

A full factory reset (a non-recoverable data destruction hard reset) may be required while troubleshooting the Internet

Gateway. For more information about how to perform a factory reset, see Factory reset a LiftMaster MYQ-828LM

Internet Gateway.

Erase all garage door opener devices (including MyQ-enabled accessories)

Caution: This process may erase remotes connected to the garage door opener.

1. Press and hold the Learn button on the control panel until the red learn LED goes out (approximately six seconds).

2. Immediately press and hold the Learn button again until the red LED goes out.

3. All codes are now erased. Reprogram any compatible accessory as the user wishes to use.

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

Complete list of compatible garage door openers

https://answers.alarm.com/ADC/Partner/Installation_and_Troubleshooting/Garage/Liftmaster_MyQ_888LM___828LM/LiftMaster_MyQ_Retrofit_(888LM___828LM)_Installation_Guide

Updated: Thu, 08 ov 2018 18:23:35 GMT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chamberlain Garagentoröffner Handbücher

Chamberlain

Chamberlain Whisper Drive Security+ 459950 Bedienungsanleitung

Chamberlain

Chamberlain 2280 Bedienungsanleitung

Chamberlain

Chamberlain Power Drive PD458D Bedienungsanleitung

Chamberlain

Chamberlain 8550W Bedienungsanleitung

Chamberlain

Chamberlain FS2 Security+ Bedienungsanleitung

Chamberlain

Chamberlain Elite EWC485 Bedienungsanleitung

Chamberlain

Chamberlain POWER DRIVE PD420 Bedienungsanleitung

Chamberlain

Chamberlain 995XD Bedienungsanleitung

Chamberlain

Chamberlain 8587WL Bedienungsanleitung

Chamberlain

Chamberlain Series 651-2MM-1/2HP Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster Premium 8355 Bedienungsanleitung

Chamberlain

Chamberlain 985 1/3HP Bedienungsanleitung

Chamberlain

Chamberlain Model MotorLift 1000 Bedienungsanleitung

Chamberlain

Chamberlain PD220 Bedienungsanleitung

Chamberlain

Chamberlain Icon 26 Bedienungsanleitung

Chamberlain

Chamberlain 1280LMC-R 1/2 HP Bedienungsanleitung

Chamberlain

Chamberlain H Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster 50-WSE-14 Bedienungsanleitung

Chamberlain

Chamberlain B730 Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster Premium Series Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster Professional CB22 Einrichtungshandbuch

Chamberlain

Chamberlain 8810CB Bedienungsanleitung

Chamberlain

Chamberlain LiftMaster Professional Security+ 3245M Bedienungsanleitung

Chamberlain

Chamberlain ML580EV Bedienungsanleitung

Beliebte Garagentoröffner Handbücher anderer Marken

Dorma

Dorma ES 90 Bedienungsanleitung

Garaga

Garaga SECURITY+ 3265GCM 1HP Bedienungsanleitung

Chase Doors

Chase Doors DuraShield Bedienungsanleitung

CSI

CSI Classic Bedienungsanleitung

HATO

HATO 120 Bedienungsanleitung

Richmond

Richmond GTR156 Bedienungsanleitung

Raynor

Raynor 1280RGD Bedienungsanleitung

CAME

CAME F4000 Series Bedienungsanleitung

B&D

B&D Controll-A-Door 5 Bedienungsanleitung

BFT

BFT PRV AA SL Bedienungsanleitung

Craftsman

Craftsman 139.53924 Bedienungsanleitung

Automatic Technology

Automatic Technology GDO-9V1 SecuraLift Bedienungsanleitung

Westfalia

Westfalia 19 36 07 Bedienungsanleitung

Cardin

Cardin BL Series Bedienungsanleitung

Craftsman

Craftsman 139.53997D Bedienungsanleitung

Bauer

Bauer CROSS18 Bedienungsanleitung

Wayne-Dalton

Wayne-Dalton 8124 Kurzanleitung

Craftsman

Craftsman 139.18867 Bedienungsanleitung