Charnwood W583 Bedienungsanleitung
2
GENERAL SAFETY RULES
WARNING: Do not attempt to operate the machine until you have read thoroughly and understood
completely all instructions, rules, etc. contained in this manual. Failure to comply may result in
accidents involving fire, electric shock, or serious personal injury. Keep this owner's manual and
review frequently for continuous safe operation.
1. Know your machine. For your own safety, read the owner's manual carefully. Learn its application
and limitations, as well as specific potential hazards pertinent to this machine.
2. Make sure all tools are properly earthed.
3. Keep guards in place and in working order. If a guard must be removed for maintenance or
cleaning, make sure it is properly replaced before using the machine again.
4. Remove adjusting keys and spanners. Form a habit of checking to see that all keys and adjusting
spanners are removed from the machine before switched it on.
5. Keep your work area clean. Cluttered areas and workbenches increase the chance of an accident.'
6. Do not use in dangerous environments. Do not use power tools in damp or wet locations, or expose
them to rain. Keep work areas well illuminated.
7. Keep children away. All visitors should be kept a safe distance from the work area.
8. Make workshop childproof. Use padlocks, master switches and remove starter keys.
9. Do not force the machine. It will do the job better and be safer at the rate for which it is
designed.
10. Use the right tools. Do not force the machine or attachments to do a job for which they are not
designed. Contact the manufacturer or distributor if there is any question about the machine's suitability
for a particular task.
11. Wear proper apparel. Avoid loose clothing, gloves, ties, rings, bracelets, and jewellery which could get
caught in moving parts. Non-slip footwear is recommended. Wear protective hair covering to contain long
hair.
12. Always use safety glasses. Normal spectacles only have impact resistant lenses. They are not safety
glasses.
13. Do not over-reach. Keep proper footing and balance at all times.
14. Maintain the machine in good condition. Keep the machine clean for best and safest performance. Follow
instructions for lubrication and changing accessories.
15. Disconnect the machine from power source before servicing and when changing the blade.
16. Never leave the machine running unattended. Turn the power off. Do not leave the machine until it comes
to a complete stop.
17. Do not use any power tools while under the effects of drugs, alcohol or medication.
18. Always wear a face or dust mask if operation creates a lot of dust and/or chips. Always operate the tool in a
well ventilated area and provide for proper dust removal. Use a suitable dust extractor.
ADDITIONAL RULES FOR PLANER/THICKNESSERS
1. This machine is designed for use with wood. Attempting to plane or thickness any other materials will result
in damage to the machine, potential fire risk and/or health hazards.
3
2. The machine is designed for indoor use only.
3. Connection to a suitable dust extraction system is highly recommended. If you must use the machine on its
own, you will need to stop it, unplug it from the mains and thoroughly clean it at regular intervals. Continuing
to use the machine when it is clogged with shavings will result in damage to it, potential fire risk and/or health
hazards.
4. The machine should only be used on the stand provided.
5. Always hold the work firmly on to the table, using push pads when necessary.
6. Never use the planer/thicknesser with the guard and/or dust hood removed.
7. If planing or thicknessing a long piece of timber, provide additional support at the same height as the table.
8. Switch the machine off and unplug it before removing any debris.
9. Be aware of the possibility of kickback.
10. Do not modify this machine in any way or use it or anything other than its designated purpose. Neither the
manufacturer nor the suppliers will be liable for any damage or injury caused by incorrect assembly, operation
or electrical connection of this machine.
Risk of Injury! Wear Eye Wear Ear
Never reach into Protection Protection
a running cutter block
Rating Description
Trade: Suitable for daily use by professional woodworkers.
Continuously rated, high power and a heavy duty construction. Typically used by several different
operators in a small or medium sized business. Will be used up to the machines maximum limit
with some long work periods. Expected maximum use of 1000 hours annually.
Please Note: Using a product in excess of its rating will void the manufacturer’s free warranty.
Charnwood W583 Specification
Motor (induction) 1500w (2hp), 240v, 50hz
Planer width 250mm (10”)
Maximum planning / Thicknessing cut 5mm / 2.5mm
Fence tilt 0 to 45°
Thicknessing capacity 5 to 195mm
Number of knives 3 x HSS
Dimensions of knives 251mm x 30mm x 3.2mm
Weight 150kg
Noise Level 87.3 dB(A)
Rating Trade
Warranty 1 Year
4
Unpacking
This product is packed into 1 wooden
crate.
To open the wooden crate, cut the
strapping and lift the lid of the crate up
from the pallet base.
Remove the plastic cover and the items
packed loosely around the sides.
To remove the machine from the pallet
base:
Using a cross head screwdriver, loosen
but do not remove, 6 screws which secure
the blue side cover.
Slide off the blue side cover.
5
The machine is fixed to the pallet base
with two screws.
Use a 10mm spanner to undo the 2
securing screws.
Refit the blue side cover.
Identify The Loose Parts
A – Pack of Fixings
B – Service Tools
C – Bridge Guard Arm
D – Cutter Guard
E – Adjustable Feet
F – Fence Guide Rail
G – Side Fence
H – Fence Guide Bracket
6
Assembly
Assemble the Base Stand:
Identify the 4 panels which make up
the base stand.
Fix 4 plastic feet into the 4 welded nuts
on the underside of the base stand.
These can be adjusted later to level the
machine.
Use 8 of the bolts, washers and nuts
provided to assemble the 4 sides of the
base stand.
Leave them finger tight for now.
This part of the assembly requires 2
people: Flip the body of the machine
upside down.
7
Feed the power cable through the cut out
in the blue side cover.
Lock it in place using the nut on the cable
grommet.
Place the assembled base stand onto
the upturned machine.
Attach it using 6 of the bolts, washers
and nuts provided.
Tighten all of the nuts on the base
stand, using a pair of 10mm spanners.
This part of the assembly requires 2
people: Flip the machine back to right side
up.
8
Assemble the fence:
Use a hex key to attach the Fence
Guide Bracket to the body of the
machine, with 2 bolts.
Slide the Fence Guide Rail into the
Guide Bracket.
Remove the 2 ratchet handles.
Insert the thin plate, which is already
attached to the Side Fence,
underneath the Fence Guide Rail, until
the back of the fence touches the
setting screw.
The setting screw is used to set the
fence at 90 degrees to the table.
Slide the 2 slotted Angle Brackets over
the two threaded studs.
Refit the ratchet handles and tighten
them.
Use a 12mm spanner, to lock the 2
slotted Angle Brackets in place by
tightening 4 bolts.
Check the angle between the fence
and the table is 90 degrees.
9
Assemble the Bridge Guard:
Locate the Bridge Guard Arm
Remove the nut from one end of the
pivot shaft, remove the ratchet handle
from the other end of the pivot shaft.
Take out the pivot shaft and screw it
into the threaded hole in the side of the
outfeed table.
Lock it in place with a 17mm spanner.
Refit the nut on the inside of the table.
Tighten the nut with an 18mm spanner.
Slide the Bridge Guard Arm back onto
the pivot shaft.
Refit the ratchet handle.
Fit the protection plate into the end of
the cutter guard arm.
Slide the Cutter Guard into the Bridge
Guard Arm.
10
Using the Planer Thicknesser
Feed Direction
PLANING MODE
Side Fence
Outfeed Table
Bridge Guard Angle Lock
Bridge Guard Position Lock
Planing Depth Scale
Infeed Table
Planing Depth Adjuster
On / Off Switch
Adjustable Feet
THICKNESSING MODE Feed Direction
Infeed Table Lock
Dust Hose Connection
Outfeed Table Lock
Cutter Guard
Side Fence Locking Knob
Thicknessing Scale
Engage/disengage Drive Rollers
Emergency Stop button
Thicknessing Table Height Adjuster
Thicknessing Table Lock
Inhaltsverzeichnis
Andere Charnwood Hobel Handbücher
