Chasing E-Reel Bedienungsanleitung

CHASING E-Reel Manual

E-Reel

The E-Reel has 14 specialized stainless steel bearings, which adopts high precision aluminum

alloy synchronous belt to drive and high quality stainless steel reciprocating lead-screw line anti-

blast technology. Up to 200 meters of tether. E-Reel offers 4800mAh large capacity battery, which

is up to 30 retracting cycles. E-Reel also supports manual rocker retracting to discharge line, and

allows single person operation and quick-deployment. Let you get rid of the trouble of manual

winding and enjoy the underwater exploration.

1. Power switch

2. Tether / charging socket

3. Speed knob：stop/slow/fast

4. Power indicator：Green 100%-60%；Yellow 59%-20%；Red 19%-0%；The indicator flashes

when the motor is running

5. Handle interface

6. Handle

7. Lifting handle

8. 3 meters tether：Used for connecting the remote controller and the E-Reel

Speciﬁcations

SIZE(mm)

280*150*270

WEIGHT

2.9kg

MAX STORAGE LENGTH

200 meters

BATTERY CAPACITY

4800mAh

NUMBER OF CYCLES

>300 times

RUNTIME

30 times

WIPING SPEED

3 gears

TAKE-UP SPEED（200m）

Fast Speed 200s

Low Speed 9min

OPERATING TEMPERATURE

-10℃~45℃

CHARGING TIME

Note: Charging time varies by environmental factors, actual results will vary

Connection

1. Connect the 3 meters tether to the E-Reel and Remote Controller.

2. Connect the tether of the E-Reel to the ROV tether socket and tighten the nut. Reserve a suitable

length and hang the tether sleeve on the tail safety buckle and tighten it.

Instructions

1. Install

1) Press the button on the right side of the straightener to open the lid

2) Insert the tether plug into the groove interface of the E-Reel and tighten the nut

3) Install the tether into the straightener and close the lid

4) Hold the E-Reel, turn on the switch, rotate the speed switch to slow/fast speed and start

winding

5) Finishing

1 2 3

4 5 6

2. Wind down

1) Press the button on the right side of the straightener to open the lid.

2) Take out the tether from the straightener.

3) Close the lid.

4) Start to wind down the tether by hand.

3. Wind up

1）Press the button on the right side of the straightener to open the lid.

2）Install the tether into the straightener, as shown in the picture.

3）Close the lid of the straightener.

4）Hold the E-Reel, turn on the switch, rotate the speed switch to slow/fast speed and start

winding

5）Finishing

Note: in the case that the winder is out of power, you can use the manual handle for rewinding.

Charging guidance

Adapter（12.6V 3A) : It could charge the Remote Controller and E-Reel.

Red light indicates Charging, green light indicates full charged.

Warning: Unplug the adapter when charging is complete

Precautions

1. You need to wait 4 seconds when you turn on the power for the first time and rotate the speed

knob to slow/fast gear.

2. When there is explosion wire, you should turn off the powerimmediately, finishing after getting

tether organized.

3. When the winding is almost complete, please adjust to a slow speed in advance.After winding

up, please timely adjust to the closing gear and turn off the power.

4. Check if the O-rings on the tether connectors are dropped or damaged. If there are missing or

damaged, please replace them in time.

5. Please pay attention to hold the E-Reel in the process of wire winding up or down.

6. E-Reel supports IP65 class waterproofing. Do not put the E-Reel in the water or splash liquid

on it. E-Reel water damage is out of warranty.

Andere Handbücher für E-Reel

Inhaltsverzeichnis

Andere Chasing Drohne Handbücher

Chasing

Chasing M2 PRO Installationsanleitung

Chasing

Chasing M2 Bedienungsanleitung

Chasing

Chasing GLADIUS mini Bedienungsanleitung

Chasing

Chasing ROV Betriebsanleitung

Chasing

Chasing M2 PRO Bedienungsanleitung

Chasing

Chasing GLADIUS mini Bedienungsanleitung

Chasing

Chasing GLADIUS mini Bedienungsanleitung

Chasing

Chasing GLADIUS MINI S Bedienungsanleitung

Chasing

Chasing M2 S Bedienungsanleitung

Chasing

Chasing DORY Bedienungsanleitung

Chasing

Chasing Gladius Standard Pro Bedienungsanleitung

Chasing

Chasing F1 Bedienungsanleitung

Chasing

Chasing DORY Bedienungsanleitung

Chasing

Chasing M2 Bedienungsanleitung

Chasing

Chasing M2 Bedienungsanleitung

Chasing

Chasing F1 Bedienungsanleitung

Beliebte Drohne Handbücher anderer Marken

Ryze

Ryze Tello Bedienungsanleitung

PowerVision

PowerVision PowerRay Bedienungsanleitung

Force1

Force1 rogue F72 Bedienungsanleitung

Zerotech

Zerotech DOBBY Bedienungsanleitung

Protocol

Protocol VIDEODRONE AP Bedienungsanleitung

dji

dji Matrice M210 Bedienungsanleitung

MAKE

MAKE Terry Kilby Bedienungsanleitung

SYMA

SYMA X440 Bedienungsanleitung

RUKO

RUKO F11 Bedienungsanleitung

SYMA

SYMA X5UW(720P) Bedienungsanleitung

Dynali

Dynali 25 H Leitfaden

dji

dji PHANTOM 4 Bedienungsanleitung

Atlas

Atlas AtlasPRO Bedienungsanleitung

Twodots

Twodots TVVIN BOARD Bedienungsanleitung

GDU

GDU SAGA Bedienungsanleitung

Ares

Ares ETHOS QX 130 Bedienungsanleitung

Walkera

Walkera ZHUN Bedienungsanleitung

dji

dji WIND-4 Bedienungsanleitung