Chatter Box FRS X2 Bedienungsanleitung

The Person ~ to ~ Person Sports Communication System
OWNERS MANUAL


Contents
Feature Highlights 4
Unpacking and Inspecting 5
Initial Set-Up 6
Features 7
Operation
Power On Off 9
Vox Sensitivity 9
Channel Select 9
Volume Level Select 10
Talk Group 10
Beep On Off Select 10
Key Lock On Off Select 10
Scan 10
Power Save Level Select 10
Intercom 11
Monitor 11
Audio-In Jack 11
AUX-In Jack 11
Battery Indicator 11
Optional Accessories 12
Headset Installation 13
Main Unit Installation 14
How to Transmit and Receive 15
Vox Adjustment Instruction Sheet 16
Trouble Shooting 17
Technical Specification 18
3

Feature Highlights
Thank you on your recent purchase of the ChatterBox model FRS X2. The
FRS X2 is a micro size 1 channel portable FM transceiver constructed with
a microprocessor controlled, temperature compensated Phase Locked Loop
(PLL) frequency synthesizer. The radio features a double conversion receiv-
er and a direct FM transmitter modulator. A special integrated circuit provides
support to sub-audible signaling (CTCSS) and most of the receiving parts are
switched off periodically in the power saver mode to reduce battery current
drain during standby. The FRS X2 is FM transceiver operating 62MHz-
67MHz. With the output power of 0.5 Watt, the radio is capable of commu-
nicating up to 2 miles. Now you can share your thoughts, as well as the road
or trail, with all your friends or even your passenger. The ChatterBox will
greatly enhance your riding experiences and can even increase your safety in
certain situations.
The ChatterBox FRS X2 is the most technologically advanced state of the art
two way radio with a range of up to 2 miles.
Sophisticated voice activated circuitry makes the FRS X2 easy to use. All you
have to do is talk.
You can operate this unit freely on each of the 1 channels and 38 talk groups
without a complicated FCC license.
Full duplex intercom for private communication between rider and passenger
is possible.
Transmission between one rider/passenger to another rider/passenger is possi-
ble.
Power is supplied by a built in rechargeable Ni-MH battery.
Enjoy the sound of music in true stereo sound which automatically mutes dur-
ing communication. An optional audio cord is needed.
An optional call cord is available to allow you to answer incoming calls from
your cellular phone, (call for applications).
An optional sport headset is available for unlimited applications; Camping
Biking, Skiing, Snowboarding, Hunting, Fishing, Hiking, etc.
4

Unpacking and Inspecting
Check that all contents are in good order. If any parts of the
equipment has been damaged in transit or is missing please contact
our customer service department immediately at (562) 07-2188.
1. FM transceiver unit
2. Stereo headset and microphone
3. Rechargeable Ni-MH battery
. AC home charger
5. PTT (Push-to-Talk-Button)
6. Mounting Bracket with allen wrench, protective rubber,
2 small screws, and 2 large screws
7. 2 Foam speaker covers
8. 2 Velcro discs
9. Wooden stick
5

Initial Set-Up
The rechargeable Ni-MH battery comes initially charged from the
factory. We recommend that the battery be pre-conditioned by
allowing it to drain completely before applying an additional 14 hr.
full charge. To reduce the risk of damage to the battery do not use
any other charger except the one supplied with the FRS X2. Please
note the battery should have a full charge before the unit is stored
for a long period of time.
If you use the unit after leaving it unused for a long period of time
or when you feel that the durability of the battery becomes shorter
than before, you can try to restore the battery to the original state
by following the steps outlined below.
1. Discharge the battery completely by leaving the unit on and set-
ting the VOX sensitivity to high (next to a TV or radio or in a
noisy room) until the battery is completely drained.
2. Charge the battery completely.
3. Discharge the battery again by following Step 1.
4. You can try to restore the battery to the original state by repeat-
ing Steps 1 and 2 at least three times.
NOTE: WHEN YOU SPEAK INTO THE MICROPHONE AND
HEAR A CHIME IT IS TIME TO RECHARGE THE BAT-
TERY.
6

8. / 9. VOLUME ADJUSTMENT
TOUGH WATER RESISTANT CASING
1. LARGE ILLUMINATED LCD DISPLAY
10. MIC / SPEAKER INPUT
11. INTERCOM INPUT
passenger
12. AUXILIARY INPUT
cellular phone*
13. AUDIO INPUT
portable radio, CD, MP3 etc.
14. FIXED LOW PROFILE ANTENNA
7. POWER ON/OFF
VOX ADJUSTMENT
BUILT-IN RECHARGEABLE Ni-MH BATTERY
3. MODE BUTTON
6. INTERCOM / MONITOR BUTTON
4. / 5. CHANNEL SELECT BUTTON
2. PUSH TO TALK BUTTON / ENTER
Features:
7

1. Illuminated LCD (Liquid Crystal Display)
2. PTT (Push-to-Talk Button)/Enter
Hold down to transmit and release to receive.
Allows you to set different functions.
3. Mode button
Press to change modes.
Allows you to program different functions.
. Up button
To select the channel and option in mode operation.
5. Down Button
To select the channel and option in mode operation.
6. Intercom/Monitor button
Allows private (unbroadcasted) driver to passenger communication.
Allows you to listen in on a channel for weak signals.
7. Power On/Off knob and VOX setting
To turn the unit on/off and to select the VOX sensitivity level.
8. Volume Up button
To increase the volume level.
9. Volume Down button
To decrease the volume level.
10. Microphone and Speaker input
For the driver’s headset.
11. Intercom input
For the passenger’s headset.
12. Auxiliary input
For a cell phone or external PTT (Call for applications.)
13. Audio input
For an external audio source (ie. Walkman, CD, MP3 player etc.).
1 . Fixed low profile Antenna.
8

Operation
Power On Off
Turn the VOX sensitivity dial clockwise to turn the unit on. The radio will
emit a tone to let you know the unit is on.
Turn the VOX sensitivity dial counterclockwise to turn the unit off. The
radio will emit a tone to let you know the unit is off.
VOX Sensitivity
The VOX dial controls the sensitivity of the microphone. As the dial is
turned clockwise, the sensitivity increases. This unit has circuitry and soft-
ware that senses when you speak through the headset and will automatical-
ly transmit. When the surrounding noise levels increase, the mic may be
activated unintentionally. To reduce the sensitivity of the mic, turn the dial
counterclockwise. When the VOX is set at a low sensitivity position, it will
require your voice to be slightly louder in order to activate the microphone
transmission.
Channel Select
Choose the desired channel by pressing Up/Down button. Then press the
PTT button to enter.
9

Volume Level Select
Choose the desired volume level with the Up/Down button. Then press the
PTT button to enter.
Talk Group
Press the Mode button once, while the number is blinking choose the
desired “talk group” by pressing Up/Down button. Then press the PTT
button to enter.
Beep On Off Select
Press the Mode button twice, choose beep On/Off by pressing the Up/Down
button. Then press the PTT button to enter.
Key Lock On Off Select
Press the Mode button three times, choose key lock On/Off by pressing the
Up/Down button. Then press the PTT button to enter.
Scan
Press the Mode button four times, while the channel is blinking press the
Up button to scan up or press the Down button to scan down. The radio
stops scanning after detecting a signal and remains on the same channel
until the signal drops out for 2 seconds. Then press the PTT button to stop
scanning.
Power Save Level Select
Press the Mode button five times, choose the desired power save level by
pressing the Up/Down button and press the PTT button to enter. “00”
power save off, “01” normal power save, “02” high power save.
10
Inhaltsverzeichnis
Andere Chatter Box Handy Handbücher
Beliebte Handy Handbücher anderer Marken

Point Mobile
Point Mobile PM60 Bedienungsanleitung

Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG
LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung












