Chatter Box BiT-3 Bedienungsanleitung

Contents

1. GETTING STARTED ........................................................................... 5

Main features ..................................................................................................... 5

Package contents ............................................................................................... 5

Battery charging ................................................................................................ 5

Battery ................................................................................................................ 6

2.INSTALLATION................................................................................. 6

Speakersandmicrophoneinstallation ................................................................ 6

InstallationofBiT-3using cradle......................................................................... 7

3. BUTTONS AND INPUTS ..................................................................... 8

4. BASIC FUNCTIONS ............................................................................ 8

Power on / o ..................................................................................................... 8

Volume up / down .............................................................................................. 8

Automatic power o .......................................................................................... 8

Voice Command ................................................................................................. 9

5. MOBILE-PHONE CONNECTION ........................................................... 9

Mobile-phone pairing ........................................................................................ 9

Second mobile-phone pairing ............................................................................ 9

New mobile-phone (the third mobile-phone) replacement .............................. 9

6. MODE CHANGE ................................................................................ 9

Music mode ........................................................................................................ 9

FM radio mode .................................................................................................... 10

Intercommode................................................................................................... 10

Phone mode ....................................................................................................... 10

Contents

7.PHONEFUNCTIONS ......................................................................... 10

Answeringanincomingcall............................................................................... 10

Rejectinganincomingcall................................................................................. 10

Hanging up the call ............................................................................................ 10

Automaticanswering......................................................................................... 10

Holding the current call, answering another incoming call ............................... 10

While in calling, rejecting another incoming call ............................................... 10

Lastnumberredialing........................................................................................ 10

While being on the phone, switching device between BiT-3 and mobile-phone .. 10

8. MUSIC MODE .................................................................................. 11

Entering/Exitingmusic mode ........................................................................... 11

Music play / stop ................................................................................................ 11

Moving to next song / previous song ................................................................ 11

Switching music play between two paired mobile-phones .............................. 11

9. FM RADIO MODE ............................................................................. 11

Entering / Exiting FM radio mode ...................................................................... 11

Playing / Muting radio ....................................................................................... 11

Scanning channel up ......................................................................................... 11

Scanning channel down .................................................................................... 11

Saving channel .................................................................................................. 11

Savedchannelup ............................................................................................... 11

Saved channel down ......................................................................................... 11

10.INTERCOM MODE ........................................................................... 11

Intercompairing.................................................................................................. 11

Intercomconnecting / disconnecting .................................................................. 12

Automatic disconnection .................................................................................... 12

Contents

11.UNIVERSALINTERCOMPAIRING ...................................................... 12

Universal Intercom pairing method when BiT-3 becomes master ...................... 12

UniversalIntercompairingmethodwhenthird-partyproductbecomesmaster.... 13

Universal Intercom connecting / disconnecting .................................................. 13

Automatic disconnection .................................................................................... 13

Switching between intercom mode and Universal Intercom mode .................... 13

12. VOX ............................................................................................ 13

Activating VOX ................................................................................................... 14

VOX sensitivity setting ...................................................................................... 14

13. LANGUAGE .................................................................................. 14

Languagesetting ............................................................................................... 14

14. RESET ......................................................................................... 14

Rebooting .......................................................................................................... 14

Factory default reset ......................................................................................... 15

15.SOFTWAREUPGRADE ..................................................................... 15

16.SUPPORT ...................................................................................... 15

Precaution ........................................................................................................... 15

Limitedwarranty................................................................................................. 16

Reasonsforlimitedliabilities............................................................................... 16

Limitation of liability ........................................................................................... 17

Liabilitiesdisclaimer ............................................................................................ 17

Technical Information ......................................................................................... 18

Customer service center ...................................................................................... 18

17.FAQ(FrequentlyAsked Questions) ................................................. 19

18. SIMPLE MANUAL .......................................................................... 21

1. GETTING STARTED

Thank you for choosing our ChatterBox BiT-3, Bluetooth Communication System for

bike helmet.

Main features

• Bluetooth V 4.1

• 1:1 intercom maximum range up to 400 meters (Refer to FAQ)

• Universal Intercom

• FM radio

• 5 Languages Voice Prompt (English, French, German, Italian, Spanish)

• Water Resistance

• Dual pairing with two Bluetooth devices (Mobile-phone, MP3, Navigation)

Package contents

• Main unit with a pre-installed battery

• USB charging cable

• Microphones for both open-face and full-face helmets.

• Speaker, Velcro for speakers, Velcro for microphones, foam microphone-covers

• Helmet mounting bracket, cradle, 2 screws and L-wrench

• User manual

Battery Charging

Connect the supplied USB cable into a PC or wall charger.

Be sure to charge the product using the charging cable provided. Charge with a nor-

mal charger of 5V or less than 1.2A. Using a high-speed charger for mobile-phones

or a supplementary battery with high-speed charging (9V, higher than 1.2A) may

inate the battery, cause explosion, or damage internal circuits.

With normal charger, it takes 2.5~3 hours to fully charge. Charging time depends on

the temperature. The red LED ashes while in charging and the blue LED lights and

stay showingthechargingisdone.If thechargingis nisheddisconnect thecharging

cable. Over charging may cause battery ination.

You can charge BiT-3 with a power bank while you are using it. In this case, red LED

and purple LED (red and blue LED at the same time) ashes alternately. When the

charging is nished, blue LED ashes.

Battery

Always keep your battery charged enough. Every battery discharge by itself natu-

rally. Ifthebatterywas discharged andnotcharged foralongtime,thevoltage drops

under2.0V, thebattery cannotbechargedagain.In thiscase,youneedtoreplace the

battery if battery replacement is applicable. However, this replacement cannot be

covered by the warranty.

Lithium Polymer battery has a protection circuit (PCM) inside. A battery with the

voltage dropped under 2.0V needs high voltage with high current to recharge it. Pro-

tection circuit blocks this high current, so the battery cannot be charged.

Do not disassemble the product or disconnect the battery. It may cause product failure.

Battery capacity may be reduced depending on environmental factors and usage.

Life cycle of Lithium Ion, Lithium Polymer battery, manufacturer guarantees only

300 times of full charges and discharges.

Use or store the product at -15°C and +50°C. Higher or lower temperatures may

cause reduced battery capacity, battery life, or temporary inactivity.

Long exposure of the product to direct sunlight may cause circuit failure or battery

failure.

Do not use product damaged by impact, circuit or battery failure may occur.

2. INSTALLATION

Speaker and microphone installation

Two microphones for both open-face helmet and full-face helmet are provided.

Please choose the one that you intend to use for the type of your helmet.

① Remove the inner pad of the helmet where you want to locate the speakers and

microphone.

② Make sure to clean inside of your helmet with alcohol and fully dry the spot where

you want to put theVelcro for the speakers and microphone.

③ For open-face helmet, attach softVelcro disk inside of the helmet at chic level

and place the boom-microphone on it. Additionally, fix the boom-stick by using

the butterfly shaped holder to support it.

④ For full-face helmet, attach soft Velcro disk on the chin bar of the helmet and

attach hard Velcro disk to the microphones.

⑤ Mount the softVelcro disks on the liner of your helmet, in the indentation of the

helmet padding, where your ears would line up. For the best sound quality, be

sure to locate the speakers to the right location.

⑥ Attach the right speaker (with the longer wire) to the correspondingVelcro disk

that you applied on the helmet liner. Attach the left speaker (with the shorter

wire) to the otherVelcro disk.

⑦ Re-install removed inner pad back on the helmet.

※CAUTION : Changing the position of the Velcro stickers for speakers and

microphones more than one time may result in poor adhesion. (You

can purchaseVelcro separately from our website.)

Installation of BiT-3 using cradle

① Prepare the provided cradle, bracket, screws and L-wrench.

② Attach the metal bracket to the cradle using screws but do not fully tighten at

this stage.

③ Slide the bracket iron plate into the gap between the helmet shell and the inner

pad.

Open-face microphone

Speakers



Full-face microphone

Cradle and Bracket



④ Nowtightenthescrewsonthebrackettofitthecradletothehelmetfirmlyusing

the L wrench.

⑤ Connect the microphone and speakers to the cradle. Be careful to match the

arrow on the connecting plug and jack.

⑥ Insert the guide n on the back of the product along the slide of the cradle and

push it down until you hear the‘click’sound.

※CAUTION : Over-tightening the screws may cause the slide to bend and make it

difficult to fit the product.

3. BUTTONS AND INPUTS

4. BASIC FUNCTIONS

Power On : Long press POWER button for 3 seconds.

Power O : Long press POWER button for 6 seconds.

※CAUTION : The power operation cannot be resumed for 8 seconds after the

power is turned on or off. Please try again after 8 seconds.

Volume Up : Press the PLUS (+) button at intervals of longer than 0.5 seconds.

Volume Down : Pressthe MINUS(-)buttonatintervalsoflongerthan0.5 seconds.

※CAUTION : Fast pressing twice in less than 0.5 seconds will result in the next /

previous song selection in Music mode or channel search on FM radio

mode.

Automatic Power-O : If you do not operate the unit for longer than 60 minutes,

the unit will automatically turn o to save the battery.

PLUS (+) button

MINUS (-) button

FUNCTION button

POWER button

USB port

Voice Command : After stopping Music or FM Radio, press and hold the PLUS (+)

button at the same time for more than 1 second to use the voice recognition feature

(Siri, S-voice, etc.) within your mobile-phone.The voice recognition feature on your

mobile-phone must be enabled.

5. MOBILE-PHONE CONNECTION

Mobile-phone Pairing

① Make sure your BiT-3 unit is powered off.

② Press and hold POWER button for 8 seconds until the LED turns and flashes in red

and blue alternately.

③ Turn on the Bluetooth function in your mobile-phone and search and select the

name of the unit (ChatterBox BiT-3Vxx)

④ Certain mobile-phones may require a password <Password: 0000>

⑤ After pairing is completed, the blue LED slowly flashes twice.

⑥ After pairing is nished, turn the power of the unit o and turn on the unit again

to prevent a sudden volume increase.

※NOTE for iPhone users: After the pairing is done, please set the unit at the

minimum volume level to prevent sudden volume increase.

Second mobile-phone pairing

Pairing sequence is exactly the same as the first mobile-phone pairing.

※CAUTION: Please make sure that you turn off the Bluetooth function of the first

paired-mobile phone before starting the second mobile-phone pairing.

New mobile-phone (the third phone) replacement

① Turn off one of the previously paired mobile-phone's Bluetooth function or delete

one the paired unit's name (ChatterBox BiT-3 Vxx) from the connected Bluetooth

device list on the mobile-phone settings.

② Pairing sequence is exactly the same as the first mobile-phone pairing.

6. MODE CHANGE

Music Mode : Short press the MAIN FUNCTION button twice.

Inhaltsverzeichnis

Andere Chatter Box Konferenzsystem Handbücher

Chatter Box

Chatter Box x2 slim Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung