Chauvet DJ GigBAR LT Bedienungsanleitung

Quick Reference Guide

GigBAR LT QRG EN

About This

Guide

The GigBAR LT Quick Reference Guide (QRG) has basic product information such as

mounting, menu options, and DMX values. Download the User Manual from

www.chauvetlighting.com for more details.

Disclaimer

The information and specifications here are subject to change without notice. Chauvet

reserves the right to revise or reissue this QRG.

Safety Notes

These Safety Notes include important information about product mounting, use, and

maintenance.

•This product is not intended for permanent installation.

•ONLY connect this product to a grounded and protected circuit.

•DISCONNECT from power before cleaning or replacing the fuse.

•DO NOT look at the light source when the product is on.

•Make sure the power cord is not crimped or damaged.

•Never disconnect this product from power cord by pulling on the cord.

•When mounting this product overhead, ALWAYS use a safety cable.

•DO NOT allow flammable materials close to the product when it is operating.

•DO NOT touch the product’s housing when it is on because it will be hot.

•

DO NOT operate this product if the housing, lenses, or cables appear damaged.

•The voltage of the outlet to which you are connecting this product must be within

the range stated on the decal or rear panel of the product.

•This product is for indoor use only! (IP20) To prevent risk of fire or shock, do

not expose this product to rain or moisture.

•Always mount this product in a location with adequate ventilation, at least 20 in

(50 cm) from adjacent surfaces.

•Be sure that no ventilation slots on the unit’s housing are blocked.

•Never connect this product to a dimmer or rheostat.

•Replace the fuse with the same type and rating.

•ONLY carry this product by the hanging/mounting brackets.

•The maximum ambient temperature is 104 °F (40 °C). Do not operate this

product at higher temperatures.

•In the event of a serious operating problem, stop using immediately.

•DO NOT open this product. It contains no user-serviceable parts.

•To eliminate unnecessary wear and improve its lifespan, during periods of non-

use completely disconnect the product from power via breaker or by unplugging

it.

Contact

Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your

distributor to request support or return a product. Visit www.chauvetlighting.com

for

contact information.

What Is

Included

•

GigBAR LT

•Power Cord

•Carrying Cases

•

Tripod

•

Footswitch

•Warranty Card

•Quick Reference Guide

•

IRC-6 Remote

To Begin

Unpack your GigBAR LT and make sure you have received all parts in good

condition. If the box or contetnts appear damaged, notify the carrier immediately, not

Chauvet.

GigBAR LT QRG EN

Product

Description

The GigBAR LT is an all-in-one pack-and-go must have for DJs, bands, and other

performers. The GigBAR LT includes two RGB LED moonflower effects, two high-

power tri-color LED PARs, and a white strobe multi-

output effect. Easily allows for

separate color and program control of each of the individually adjustable pods. You

can mount up to 4 additional products to the top of the GigBAR LT.

Product Overview

AC Power

This product has an auto-ranging power supply that can work with an input voltage

range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-

use completely

disconnect from power via breaker or by unplugging it.

Power Linking

For the maximum number of GigBAR LT

products that you can power link at each

voltage, see the User Manual or the sticker on the product.

Fuse

Replacement

To replace the fuse in the GigBAR LT:

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.

3. Pry the safety cap out of the housing.

Remove the blown fuse from the clip on the front of the safety cap and replace

with a fuse of the exact same type and rating.

5. Re-insert the fuse holder and reconnect power.

Back Panel View

Power In

Fuse Holder

LED Display

Strobe LEDs

Sound Sensitivity

Knob

DMX In/Out

Power Out

Safety Loop

Menu Buttons

IR Sensor

Front View

Microphone

IR Sensor

Moonflowers

Pars

Footswitch

Plug

GigBAR LT QRG EN

Mounting

Before mounting this product, read the Safety Notes.

Product

Mounting

Diagram

Control Panel

Description

Button Function

<MENU>

Exits the current menu or function

<UP>

Navigates up through the menu list or increases the numeric value

when in a function

<DOWN>

Navigates down through or decreases the numeric value

<ENTER>

Activates a menu option or a selected value

DMX Linking

The GigBAR LT can work with a DMX controller when linked by DMX serial

connections. Instructions for DMX operation are in the User Manual. A DMX Primer is

available from www.chauvetlighting.com.

Starting

Address

To ensure full access to all channels in each DMX mode, the highest recommended

DMX address is 496.

Master/Slave

Connection

The GigBAR LT uses the DMX data connection for its Master/Slave mode. Instructions

for connecting and configuring this product for Master/Slave operation are in the User

Manual.

Footswitch Operation

The included footswitch provides quick access to preset colors, programs, and

sound-activation through the GigBAR LT microphone.

To use the footswitch:

1. Connect the GigBAR LT to power.

2. Navigate to Auto or Sound mode.

3. Press any button on the footswitch.

Pedal

Function

(Auto)

Cycles through Auto programs

(Sound)

Cycles through Sound-active programs

(Color)

Cycles through colors

(Blackout)

Toggles Blackout on or off (Stops all output)

Additional Product

Mounting Knobs

Pod Pan Adjustment Knob

Pod Tilt Adjustment Knob

Tripod Insertion Point

GigBAR LT QRG EN

Menu Options

Main Level

Programming Levels

Description

Aut_

Aut1

F 01–F 99

Auto mixed effect 1 (speed)

Aut2

Auto mixed effect 2 (speed)

Sud_

Sud1

Sound

-active mixed effect 1

Sud2

Sound

-active mixed effect 2

ShoW

AP--

AP01–AP07

F 01–F 99

Auto Par programs (speed)

AM01

F 01–F 99

Auto Moonflower program (speed)

AS--

AS01–AS10

F 01–F 99

Auto Strobe programs (speed)

APM-

APM1–APM4

F 01–F 99

Auto Par + Moonflower programs (speed)

APS1

F 01–F 99

Auto Par + Strobe program (speed)

AMS1

F 01–F 99

Auto Moonflower + Strobe program (speed)

SP--

SP01–SP07

Sound-active Par programs

SM01

Sound-active Moonflower program

SS--

SS01–SS10

Sound

-active Strobe programs

SPM-

SPM1–SPM4

Sound-active Par + Moonflower programs

SPS1

Sound-active Par + Strobe program

SMS1

Sound-active Moonflower + Strobe program

CoLo

r000–r255

g000–g255

b000–b255

Custom mix colors (red, green, blue)

d__ _

17CH d001–d496

Sets 17-channel DMX personality and

address

06CH d001–d507

Sets 6-channel DMX personality and

address

03CH d001–d510

Sets 3

-channel DMX personality and

address

SLAV

Slave mode

SYS dSEt 1234

Rearrange fixtures

<UP>

selects a fixture,

<DOWN> changes the address

rSEt

Resets to factory defaults

GigBAR LT QRG EN

IRC

-6 Remote (Infrared Remote Control)

The GigBAR LT is compatible with the IRC-6 remote from Chauvet.

The following IRC-6 buttons are used with the GigBAR LT:

Turns LEDs on/off

Activates Auto Mode

Activates Sound Mode

Activates/Deactivates Strobe Modes

Activates Par and Moonflower Color Fade

Sets Pars and Moonflowers to Red

Sets Pars and Moonflowers to Green

Sets Pars and Moonflowers to Blue

Sets Pars and Moonflowers to Yellow (Red + Green)

Sets Pars and Moonflowers to Purple (Red + Blue)

Sets Pars and Moonflowers to White (Red + Green + Blue)

Increases program speed or selected value

Decreases program speed or selected value

Auto Mode

Sound Mode

Strobe Modes

Mixed effect 1 (default)

Strobe All (default)

Mixed effect 2

Strobe Auto 1

Par 1

Strobe Auto 2

Par 2

Strobe Auto 3

Moonflower

Strobe Auto 4

Par + Moonflower 1

Strobe Auto 5

Par + Moonflower 2

Strobe Auto 6

Par + Moonflower 3

Strobe Auto 7

Par + Strobe

Strobe Auto 8

Moonflower + Strobe

Strobe Auto 9

- Has no function with this product.

GigBAR LT QRG EN

DMX Values

17CH

Channel

Function Value

Percent/Setting

Par 1 Red

000 ó255

0–100%

Par 1 Green

000 ó255

0–100%

Par 1 Blue

000 ó255

0–100%

4 Par 1 Shutter

000 ó127

Dimmer 0–100%

128 ó239

Strobe, slow to fast

240 ó249

Sound-activated strobe

250 ó255

Full on

Par 2 Red

000 ó255

0–100%

Par 2 Green

000 ó255

0–100%

Par 2 Blue

000 ó255

0–100%

8 Par 2 Shutter

000 ó127

Dimmer 0–100%

128 ó239

Strobe, slow to fast

240 ó249

Sound-activated strobe

250 ó255

Full on

9 Moonflower 1

Color

000 ó024

No function

025 ó049

Red

050 ó074

Green

075 ó099

Blue

100 ó124

Red + green

125 ó149

Red + blue

150 ó174

Green + blue

175 ó199

Red + green + blue

200 ó224

Auto single color loop

225 ó255

Auto two color loop

Moonflower 1

Strobe (When CH9

is 025 ó199)

000 ó009

No function

010 ó239

Strobe, slow to fast

240 ó255

Sound-activated strobe

Moonflower 1

Auto Speed (When

CH9 is 200 ó255)

000 ó239

Auto speed, slow to fast

240 ó255

Sound-activated mode

11 Moonflower 1

Rotation

000 ó004

Stop

005 ó127

Rotate clockwise, slow to fast

128 ó133

Stop

134 ó255

Rotate counter-clockwise, slow to fast

GigBAR LT QRG EN

17CH

(cont.)

Channel

Function

Value Percent/Setting

Moonflower 2

Color

000 ó024

No function

025 ó049

Red

050 ó074

Green

075 ó099

Blue

100 ó124

Red + green

125 ó149

Red + blue

150 ó174

Green + blue

175 ó199

Red + green + blue

200 ó224

Auto single color loop

225 ó255

Auto two color loop

Moonflower 2

Strobe

(When CH12

is 025

ó199)

000 ó009

No function

010 ó239

Strobe, slow to fast

240 ó255

Sound-activated strobe

Moonflower 2

Auto Speed

(When

CH12 is 200 ó255)

000 ó239 Auto speed, slow to fast

240 ó255

Sound-activated mode

Moonflower 2

Rotation

000 ó004

Stop

005 ó127

Rotate clockwise, slow to fast

128 ó133

Stop

134 ó255

Rotate counter-clockwise, slow to fast

Strobe Program

000 ó009

All on (CH16 must be active)

010 ó029

Auto program 1

030 ó049

Auto program 2

050 ó069

Auto program 3

070 ó089

Auto program 4

090 ó109

Auto program 5

110 ó129

Auto program 6

130 ó149

Auto program 7

150 ó169

Auto program 8

170 ó189

Auto program 9

190 ó209

All strobing

210 ó255

Sound-activated strobe

Strobe Dimmer

000 ó255

0–100%

Strobe Speed

000 ó255

Strobe speed, slow to fast

GigBAR LT QRG EN

06CH

Channel

Function Value

Percent/Setting

Red

000 ó255

0–100%

Green

000 ó255

0–100%

Blue

000 ó255

0–100%

4 Shutter

000 ó127

Dimmer 0–100%

128 ó239

Strobe speed, slow to fast

240 ó249

Sound-activated strobe

250 ó255

Full on

5 Moonflower

Rotation

000 ó004

Stop

005 ó127

Rotate clockwise, slow to fast

128 ó133

Stop

250 ó255

Rotate counter-clockwise, slow to fast

6 Strobe

000 ó054

Strobe dimmer, 0–100%

055 ó255

Strobe speed, slow to fast

03CH

Channel

Function Value

Percent/Setting

1 Auto/Sound

Programs

000 ó009

No function

010 ó119

Auto mixed effect 1, slow to fast

120 ó229

Auto mixed effect 2, slow to fast

230 ó234

Sound-activated mixed effect 1

235 ó239

Sound-activated mixed effect 2

240 ó255

Show mode (Ch. 2 must be active)

2 Show Mode

(CH1 must be

240 ó255)

000 ó009

No function

010 ó029

Pars

030 ó049

Moonflowers

050 ó069

Strobes

070 ó089

Pars + Moonflowers

090 ó109

Pars + Strobes

110 ó129

Moonflowers + Strobes

130 ó149

Sound-active Pars

150 ó169

Sound-active Moonflowers

170 ó189

Sound-active Strobes

190 ó209

Sound-active Pars + Moonflowers

210 ó229

Sound-active Pars + Strobes

230 ó255

Sound-Active Moonflowers + Strobes

Show Mode Speed

000 ó255

CH2 Program speed, slow to fast

GigBAR LT GRR ES

Acerca de esta

guía

La Guía de referencia rápida (GRR) del GigBAR LT contiene información básica

sobre el producto, como montaje, opciones de menú y valores DMX. Descargue el

manual de usuario de www.chauvetlighting.com para una información más detallada.

Exención de

responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a cambio sin

previo aviso.

Notas de seguridad

Estas notas de seguridad incluyen información importante sobre el montaje, uso y

mantenimiento.

•

Este producto no está concebido para una instalación permanente.

•Conecte este producto SOLO a un circuito con toma de tierra y protegido.

•Desconecte siempre de la alimentación antes de la limpieza o sustitución del fusible.

•NO mire a la fuente de luz cuando el producto esté encendido.

•Asegúrese de que el cable de alimentación no está retorcido ni estropeado.

•Nunca desconecte este producto de la alimentación tirando del cable.

•Cuando monte este producto en alto, use un cable de seguridad.

•NO permita la presencia de materiales inflamables cerca de la unidad cuando esté

en funcionamiento.

•NO toque este producto cuando esté en funcionamiento, pues podría estar caliente.

•

La tensión del enchufe al que conecte este producto ha de estar en el rango

establecido en el grabado o en el panel posterior del producto.

•¡Este producto es para uso en interiores solamente! (IP20) Para evitar riesgos de

incendio o descarga, no exponga este producto a la lluvia o la humedad.

•Monte siempre este producto en una ubicación con ventilación adecuada, al

menos a 20 in (50 cm) de superficies adyacentes.

•Asegúrese de que ninguna ranura de ventilación en la carcasa de la unidad queda

bloqueada.

•Nunca conecte este producto a un atenuador o reostato.

•Sustituya el fusible con uno del mismo tipo y categoría.

•Use SOLAMENTE los soportes de colgar/montar o las asas para mover este producto.

•La temperatura ambiente máxima es de 104 °F (40 °C). No haga funcionar este

producto a temperaturas más altas.

•En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.

•NO abra este producto. No contiene piezas reparables por el usuario.

•Para evitar un desgaste innecesario y alargar su vida útil, desconecte

completamente el producto mediante el interruptor o desenchufándolo durante

periodos en que no se use.

Contacto

Fuera de EE. UU., Reino Unido, Irlanda, México o Benelux póngase en contacto con

su distribuidor para solicitar asistencia o devolver un producto.

Visite

www.chauvetlighting.com para información de contacto.

Qué va

incluido

•GigBAR LT

•Cable de alimentación

•Cajas de transporte

•

Trípode

•Pedal

•Tarjeta de garantía

•Guía de referencia rápida

•

Mando a distancia IRC-6

Para empezar

Desembale su GigBAR LT y asegúrese de que ha recibido todas las partes en buen

estado. Si la caja o los componentes parecen dañados, notifíqueselo inmediatamente

al transportista, no a Chauvet.

Inhaltsverzeichnis

Sprachen:

Andere Chauvet DJ Beleuchtungsausrüstung Handbücher

Chauvet DJ

Chauvet DJ ABYSS 2 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Gobo Shot Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR H6 Bedienungsanleitung

Chauvet DJ

Chauvet DJ GigBAR 2 Bedienungsanleitung

Chauvet DJ

Chauvet DJ SWARM WASH FX ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ WL56 Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Spot 360X Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR LTBT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ KINTA FX ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ COLORband HEX 9 IRC Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4 BAR LT QuadBT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Intimidator Free Spot 60 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4BAR Flex Q ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ EZLink Strip Q6BT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Bob LED H3 Bedienungsanleitung

Chauvet DJ

Chauvet DJ 4 BAR LT QuadBT ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ Freedom Stick x4 Bedienungsanleitung

Chauvet DJ

Chauvet DJ DJ Bank Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR PRO Q USB Bedienungsanleitung

Chauvet DJ

Chauvet DJ LED Followspot 120ST Bedienungsanleitung

Chauvet DJ

Chauvet DJ SlimPAR H6 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Bedienungsanleitung

Chauvet DJ

Chauvet DJ FREEDOM CENTERPIECE Bedienungsanleitung

Chauvet DJ

Chauvet DJ ABYSS 2 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung