Chauvet Professional ONAIRPANEL2IP Bedienungsanleitung

Model ID: ONAIRPANEL2IP

Quick Reference Guide

English EN

Español ES

Français FR

Deutsch DE

Nederlands NL

QUICK REFERENCE GUIDE

onAir IP Panel 2 QRG Rev. 6

About This Guide

The onAir IP Panel 2 Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and

DMX values. Download the User Manual from www.chauvetprofessional.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to change without notice.

LIMITED WARRANTY

FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.

For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.

For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and

Germany: www.chauvetlighting.eu/warranty-registration.

Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the

period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This

warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this

warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows

the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This

warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to

country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,

Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.

Safety Notes

• The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 19.7 in

(50 cm) is not expected.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord

exclusively available from the manufacturer or his service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a

similar qualified person.

• The luminaire is intended for professional use only.

• DO NOT open this product. It contains no user-serviceable parts.

• DO NOT look at the light source when the product is on.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the

product from power via breaker or by unplugging it.

• CAUTION: When transferring product from extreme temperature environments, (e.g. cold truck to warm humid

ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow

product to fully acclimate to the surrounding environment before connecting it to power.

• CAUTION: This product’s housing may be hot when lights are operating.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• DO NOT leave any flammable material within 7.87 in (20 cm) of this product while operating or connected to power.

• USE a safety cable when mounting this product overhead.

• DO NOT submerge this product (IP65). Regular outdoor operation is fine.

• DO NOT operate this product if the housing, lenses, or cables appear damaged.

• DO NOT connect this product to a dimmer or rheostat.

• ONLY connect this product to a grounded and protected circuit.

• ONLY use the hanging/mounting bracket or the handles to carry this product.

• In the event of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

RF Exposure Warning for North America, and Australia

Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This

equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This

transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Contact

Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or

return a product. Refer to Contact Us at the end of this QRG for contact information.

What is Included

• onAir IP Panel 2

• Seetronic Powerkon IP65 cable

• Omega bracket with mounting hardware

•Juniorpin

• Quick Reference Guide

onAir IP Panel 2 QRG Rev. 6

QUICK REFERENCE GUIDE

AC Power

This product has an auto-ranging power supply that can work with an input voltage range of 100–240 V~, 50/60 Hz.

Power Linking

You can link up to 3 onAir IP Panel 2 products at 100 V, 4 products at 120 V, 7 products at 208 V, 8 products at

230 V, or 8 products at 240 V. Never exceed this number. Power linking cords can be purchased separately.

AC Plug

DC Power

This product has a 3-pin IP65 XLR power input port that can work with an input voltage of 28 V DC which is SELV voltage

supplied by short-circuit-proof power supply.

Signal Connections

The onAir IP Panel 2 will work with a controller or controller software using a wired DMX connection, a wireless

Lumenradio CRMX™ connection, or an Ethernet connection, If using other Art-Net™ or sACN-compatible products with

the onAir IP Panel 2, each can be controlled individually on a single network. See the User Manual for information about

how to connect and configure the product for these signals.

Control Personalities

The onAir IP Panel 2 uses DMX, CRMX™, Art-Net™, and sACN for its control personalities: 1Ch, 3Ch, 4Ch, 5Ch,

6Ch, 8Ch, 11Ch, 15Ch, 16Ch, 18Ch, 23Ch, 32Ch, XYBasic(6), and XYExtended(10).

DMX Connection

The onAir IP Panel 2 will work with a DMX controller using a 5-pin DMX data connection or a wireless CRMX™

connection. A DMX Primer is available from www.chauvetprofessional.com.

Art-Net™ Connection

Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using an Neutrik®

etherCON® RJ45 connection over a large network. An Art-Net™ protocol document is available from

www.chauvetprofessional.com. Chauvet Professional recommends using unicast Art-Net™ for best results.

Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the layering and formatting of Architecture

for Control Networks to transport DMX512 data over IP or any other ACN compatible network.

RDM (Remote Device Management)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally

along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers

have this capability. The onAir IP Panel 2 supports RDM protocol that allows feedback to make changes to menu map

options. Download the User Manual from www.chauvetprofessional.com for more details.

USB Software Update

The onAir IP Panel 2 allows for software update through USB using the built-in USB port. To update the software using

USB flash drive, do the following:

1. Power on the fixture and plug the flash drive into the USB port.

2. Once the flash drive has been detected, the message “Upgrade Firmware” will be displayed. Press <ENTER>.

• If a different message appears on the display, search for the updated software in the Main Menu (Update

Firmware) and select from Only This Unit, Multiple Units, or Other Fixture Type. A list of the software

update files will be displayed.

3. Select the file that needs to be uploaded. The message "Are you sure?" will be displayed. Press <ENTER>.

4. If the selected file is correct, the upgrade will be completed. Restart the fixture.

• If the selected file is incorrect, the upgrade will fail, and the display will go back to the main interface. Repeat

steps 1-3 using the correct file.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow/Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

If AC power and DC power are input to the product at the same time, the product will automatically

give priority to AC power input.

To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

The .chl format file needs to be placed in the ONAIR folder in the USB flash drive.

The “Other Fixture Type” option can only be selected for connected products compatible with the

Upload 03 (the first 2 digits of the item code must be 03).

QUICK REFERENCE GUIDE

onAir IP Panel 2 QRG Rev. 6

Wireless Operation

In optimal conditions, the onAir IP Panel 2 can operate up to 300 m (900 ft) away from the CRMX™ transmitter, The

CRMX™ receiver in the onAir IP Panel 2 must be paired with the CRMX™ transmitter for wireless operation.

Initial Setup

1. Turn the CRMX™ transmitter on.

2. Connect the CRMX™ transmitter to a DMX controller.

3. Place the onAir IP Panel 2 within 300 m from the CRMX™ transmitter.

4. Turn the onAir IP Panel 2 on.

Configuration

1. From the onAir IP Panel 2’s control panel, go to DMX Address.

2. Select the start address, as with any other DMX compatible product.

3. Go to Wireless Setting > Receive On/Off.

4. Select On. (The Signal Strength Indicator will show a ?in front of the bars)

5. Press the reset button on the CRMX™ transmitter. (The Signal Strength Indicator on the onAir IP Panel 2 will

show a ϟin front of the bars for 3 seconds while a connection is established.)

Product Pairing

If the onAir IP Panel 2 has already been paired with the CRMX™ transmitter, the Signal Strength Indicator on top of the

display will show the strength of the signal. In this case, the onAir IP Panel 2 is ready to work in Wireless mode.

Pairing the onAir IP Panel 2 and a New CRMX™ Transmitter

1. From the onAir IP Panel 2 control panel, go to Wireless Setting > Receive Reset.

2. Select Yes.

3. From the CRMX™ transmitter, press <RESET>. The signal indicator on the transmitter will flash.

4. Once the transmitter has found the onAir IP Panel 2, the signal indicator on the CRMX™ transmitter will

illuminate solid.

5. The display screen on the onAir IP Panel 2 will show the strength of the signal.

Mounting

Before mounting this product, read the Safety Notes. Make sure the mounting clamps are capable of supporting the

weight of the product. Mounting clamps sold separately. For our CHAUVET Professional line of mounting clamps, go to

http://trusst.com/products.

Mounting Diagram

CRMX™ operation can be interrupted or inhibited by people or liquid masses, including water or

snow, between the transmitter and receiver. For best results, keep the area between the transmitter

and receiver clear of any liquid masses.

Safety cable

Omega

bracket

Mounting

clamp

Secure the safety

cable using the

passageways on

the back of the

product

Junior pin

Junior pin screw

onAir IP Panel 2 QRG Rev. 6

QUICK REFERENCE GUIDE

Accessory Slots

The onAir IP Panel 2 has 2 accessory slots that can be accessed by pressing the accessory slot tabs inward and opening

the hinged accessory slot cover.

• The back slot is for a diffuser or intensifier.

• The front slot is for accessories such as a honeycomb or barndoors.

Home Screen

The home screen of the onAir IP Panel 2 shows the current settings and status of the product.

• Do not use when the diffuser is removed. The diffuser cannot be removed when the fixture is

powered on.

• For fixed mounted luminaires, the risk group shall not exceed RG1 at the distance obtaining 500 lx.

Number Description

1Current product temperature

2Current wireless signal status

3Current preset or preset bank

4Middle line shows current control mode. Shows DIM +/-GRN CCT in CCT mode, DIM HUE SAT in HSV

mode, DIM X Y in XY Control mode, Master Mode in master mode, Slave Mode in slave mode, etc.

5Bottom line shows details of the current control mode

6Current dimmer or intensity value (00.0–100%) in CCT, HSV, or XY Control mode

Current +/- green value (-0.25–+0.25) in CCT mode, hue value (000–360°) in HSV mode, or X value

(0.00–0.850) in XY Control mode

8Current color temperature (2800–8000K) in CCT mode, saturation value (000–255) in HSV mode, or Y

value (0.00–0.850) in XY Control mode

876

321

QUICK REFERENCE GUIDE

onAir IP Panel 2 QRG Rev. 6

Control Panel Description

Menu Map

Refer to the onAir IP Panel 2 product page on

www.chauvetprofessional.com

for the latest menu map.

Button/Knob Function

<MENU> Exits from the current menu or function

<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function

<UP> Navigates upwards through the menu list or increases the numeric value when in a function

<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function

<DIM/INTENSITY> Increases or decreases the dimmer value or intensity

<HUE> Increases or decreases the hue value or X value

Increases or decreases the color temperature, saturation, or Y value

<PRESET A/B> Toggles between A presets (built-in) and B presets (custom)

<PRESET> (x8) Selects a preset. Hold for 3 seconds to save the current look to the selected B preset.

Main Level Programming Levels Description

Protocol

DMX512

Sets the control protocolArtnet

sACN

DMX

Address 001–509* Selects DMX address (*Highest channel

restricted to personality chosen)

DMX Channel

1Ch

Preset CCTs Hue <-25–25> 1-channel: selects a preset CCT and hue

Manual Color

Mixer

Red <000–255>

1-channel: combine red, green, blue, and

white to make a custom color (0–100%)

Green <000–255>

Blue <000–255>

White <000–255>

3Ch 3-channel: dimmer, color temperature, hue

4Ch 4-channel: RGBW

5Ch 5-channel: 16-bit dimmer, color temperature,

hue, strobe

6Ch 6-channel: dimmer, RGBW, strobe

8Ch 8-channel: 16-bit RGBW

11Ch

11-channel: 16-bit dimmer, RGBW, strobe, color

temperature, hue, effect macros, and speed

15Ch 15-channel: 16-bit dimmer, 16-bit RGBW,

strobe, color temperature, hue, effect

macros, and speed

16Ch 16-channel: RGBW 1–4

18Ch 18-channel: dimmer, RGBW 1–4, and strobe

23Ch 23-channel: dimmer, RGBW 1–4, strobe,

color temperature, hue, effect macros and

speed, control

32Ch 32-channel: 16-bit RGBW 1–4

XYBasic(6) 6-channel: 16-bit dimmer, 16-bit X, 16-bit Y

XYExtended(10) 10-channel: 16-bit dimmer, 16-bit X, 16-bit Y,

strobe, effect macros and speed, control

Static

CCT Control Correlated color temperature control

HSV Control Hue, saturation, value control

XY Control X and Y coordinate control

Preset CCTs

2800K

Dimmer

Hue

<000–255>

<-25–25>

Selects preset color temperature, dimmer

and hue

2900K

3000K

3100K

3200K

3300K

3400K

3500K

3600K

onAir IP Panel 2 QRG Rev. 6

QUICK REFERENCE GUIDE

Static

(cont.)

Preset CCTs

(cont.)

3700K

Dimmer

Hue

<000–255>

<-25–25>

Selects preset color temperature, dimmer

and hue

3800K

3900K

4000K

4100K

4200K

4300K

4400K

4500K

4600K

4700K

4800K

4900K

5000K

5100K

5200K

5300K

5400K

5500K

5600K

5700K

6000K

6500K

7000K

7500K

8000K

Manual Color

Mixer

Red

<000–255> Combine red, green, blue, and white to make

custom color (0–100%)

Green

Blue

White

Effect

Macros

Color Chase

<001–100> Selects effect macro and speed

Police Car

Firetruck

Fire

Clouds

Fireworks

Paparazzi

Lightning

Red Shift On Enables or disables red shift

Off

Master/Slave Master Standalone mode

Slave Slave mode

DMX Loss

Hold Last Holds last signal received

Stop DMX Holds output

Blackout Blacks out the product

Dimmer

Curve

S Curve

Sets the dimmer curve

Linear

Square

Inverse Square

Dimmer

Mode Off Instantaneous dimmer

Dimmer 1–3 Dimmer mode, fast (1) to slow (3)

Main Level Programming Levels Description

QUICK REFERENCE GUIDE

onAir IP Panel 2 QRG Rev. 6

Color

Calibration

Off Color calibration off

User

Calibration

Red

<125–255>

Sets maximum red LED value

Green Sets maximum green LED value

Blue Sets maximum blue LED value

White Sets maximum white LED value

Factory Calibration Color calibration set by factory

LED

Frequency

600Hz

Sets the Pulse Width Modulation frequency

1200Hz

2000Hz

4000Hz

6000Hz

25KHz

Fan Mode

Auto Sets the fan to auto mode

On Sets the fan to always on

Off Sets the fan to always off

Silent Sets the fan to silent

Wireless

Setting

Receive On/

Off

Off Enables/disables CRMX™

Receive

Reset No Resets wireless receiver

Yes

Wireless To

DMX No Enables/disables wireless to DMX

Yes

Back Light

10S Turns off display backlight after 10 seconds

of inactivity

30S Turns off display backlight after 30 seconds

2Min Turns off display backlight after 2 minutes of

Always On Display backlight always on

Ethernet

Setting

Universe 000–255 (Art-net™) Sets the Art-Net™ or sACN universe

001–256 (sACN)

Start Channel 001–512 Sets the starting channel

IP Address

000–255 . 000–255 . 000–255

Sets the IP address10

239

Ethernet To

DMX No Enables/disables Ethernet to DMX

Yes

Information

Fixture Hours

<_ _ _ _ _H> Shows total hours the product has been

powered on

LED Hours <_ _ _ _ _H> Shows total hours the LEDs have been

powered on

Disp Version <V_._ _> Shows current display version

Drv Version <V_._ _> Shows current driver version

Net Version <V_._ _> Shows current net version

UID 21A40139_ _ _ _ Shows product UID

Update

Firmware

Only This Unit _ _ _ _ _ _.CHL Selects an update file for this product, or

shows “No such file!”

...

Multiple Units _ _ _ _ _ _.CHL

Selects an update file for this and connected

onAir IP Panel 2 products, or shows

“

No such file!

”

...

Other Fixture Type _ _ _ _ _ _.CHL Selects an update file for other connected

products, or shows “No such file!”

...

Factory

Reset No Resets the product to factory default settings

Yes

Main Level Programming Levels Description

onAir IP Panel 2 QRG Rev. 6

QUICK REFERENCE GUIDE

DMX Values

XYExtended(10)

XYBasic(6)

32Ch

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2 Fine dimmer 000 255 0–100%

3 X coordinate 000 255 0–100%

4 Fine X coordinate 000 255 0–100%

5 Y coordinate 000 255 0–100%

6 Fine Y coordinate 000 255 0–100%

7Strobe 000 010 No function

011 255 Strobe, slow to fast

8 Effect macros 000 255 See the Effect Macros Chart

9 Effect macro speed 000 255 Speed, slow to fast

10 Control 000 255 See the Control Chart

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2 Fine dimmer 000 255 0–100%

3 X coordinate 000 255 0–100%

4 Fine X coordinate 000 255 0–100%

5 Y coordinate 000 255 0–100%

6 Fine Y coordinate 000 255 0–100%

Channel Function Value Percent/Setting

1Red1 000 255 0–100%

2Finered1 000 255 0–100%

3Green1 000 255 0–100%

4 Fine green 1 000 255 0–100%

5Blue1 000 255 0–100%

6 Fine blue 1 000 255 0–100%

7White1 000 255 0–100%

8 Fine white 1 000 255 0–100%

9Red2 000 255 0–100%

10 Fine red 2 000 255 0–100%

11 Green 2 000 255 0–100%

12 Fine green 2 000 255 0–100%

13 Blue 2 000 255 0–100%

14 Fine blue 2 000 255 0–100%

15 White 2 000 255 0–100%

16 Fine white 2 000 255 0–100%

17 Red 3 000 255 0–100%

18 Fine red 3 000 255 0–100%

19 Green 3 000 255 0–100%

20 Fine green 3 000 255 0–100%

21 Blue 3 000 255 0–100%

22 Fine blue 3 000 255 0–100%

23 White 3 000 255 0–100%

24 Fine white 3 000 255 0–100%

25 Red 4 000 255 0–100%

26 Fine red 4 000 255 0–100%

27 Green 4 000 255 0–100%

QUICK REFERENCE GUIDE

onAir IP Panel 2 QRG Rev. 6

23Ch

18Ch

28 Fine green 4 000 255 0–100%

29 Blue 4 000 255 0–100%

30 Fine blue 4 000 255 0–100%

31 White 4 000 255 0–100%

32 Fine white 4 000 255 0–100%

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2Red1 000 255 0–100%

3Green1 000 255 0–100%

4Blue1 000 255 0–100%

5White1 000 255 0–100%

6Red2 000 255 0–100%

7Green2 000 255 0–100%

8Blue2 000 255 0–100%

9White2 000 255 0–100%

10 Red 3 000 255 0–100%

11 Green 3 000 255 0–100%

12 Blue 3 000 255 0–100%

13 White 3 000 255 0–100%

14 Red 4 000 255 0–100%

15 Green 4 000 255 0–100%

16 Blue 4 000 255 0–100%

17 White 4 000 255 0–100%

18 Strobe 000 010 No function

011 255 Strobe, slow to fast

19 Color temperature 000 255 See the Color Temperature Chart

20 Hue 000 001 0

002 255 -25–+25

21 Effect macros 000 255 See the Effect Macros Chart

22 Effect macro speed 000 255 Speed, slow to fast

23 Control 000 255 See the Control Chart

Channel Function Value Percent/Setting

1 Dimmer 000 255 0–100%

2Red1 000 255 0–100%

3Green1 000 255 0–100%

4Blue1 000 255 0–100%

5White1 000 255 0–100%

6Red2 000 255 0–100%

7Green2 000 255 0–100%

8Blue2 000 255 0–100%

9White2 000 255 0–100%

10 Red 3 000 255 0–100%

11 Green 3 000 255 0–100%

12 Blue 3 000 255 0–100%

13 White 3 000 255 0–100%

14 Red 4 000 255 0–100%

15 Green 4 000 255 0–100%

16 Blue 4 000 255 0–100%

Channel Function Value Percent/Setting

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Chauvet Professional DJ-Equipment Handbücher

Chauvet Professional

Chauvet Professional OVATION E-930VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R3X WASH Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Storm 1 Hybrid Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 1-Quad IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional MAVERICK FORCE 3 PROFILE Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-910FC IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional RB-F50CM Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue Outcast 1 Beam Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1X Spot Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation P-56UV Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir Producer Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue R1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H7XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELLPANEL Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAir IP Panel 2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION P-56VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation ETD-40WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Hex 12 QRG Bedienungsanleitung

Chauvet Professional

Chauvet Professional GROUND SUPPORT 2 KIT Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-Quad 7 Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE ARRAY 1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R2X SPOT Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue Outcast 1 BeamWash Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION MIN-E-10WW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung