Chauvet Professional Ovation F-415FC Bedienungsanleitung

Model ID: OVATIONF415FC

User Manual

Ovation F-415FC User Manual Rev. 7

Edition Notes

The Ovation F-415FC User Manual includes a description, safety precautions, installation, programming,

operation and maintenance instructions for the Ovation F-415FC.

Trademarks

Chauvet, Chauvet Professional, the Chauvet logo, and Ovation F-415FC are registered trademarks or

trademarks of Chauvet & Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other

countries. Other company and product names and logos referred to herein may be trademarks of their

respective companies.

The works of authorship contained in this manual, including, but not limited to, all designs, text, and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com.

Document Revision

This Ovation F-415FC User Manual is the 7th edition of this document. Go to

www.chauvetprofessional.com for the latest version.

Ovation F-415FC User Manual Rev. 7

Table of Contents

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Manual Conventions ..................................................................................... 1

Symbols ........................................................................................................ 1

FCC Statement of Compliance ..................................................................... 1

Safety Notes.................................................................................................. 2

Expected LED Lifespan................................................................................. 2

2. Introduction ................................................................................ 3

Description .................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 4

3. Setup ........................................................................................... 5

AC Power...................................................................................................... 5

AC Plug .......................................................................................................................... 5

Power Linking................................................................................................................. 5

Fuse Replacement ......................................................................................................... 5

DMX Linking.................................................................................................. 5

DMX Personalities.......................................................................................................... 5

Remote Device Management......................................................................................... 5

Master/Slave Connectivity............................................................................. 6

Mounting ....................................................................................................... 6

Orientation...................................................................................................................... 6

Rigging ........................................................................................................................... 6

Procedure....................................................................................................................... 6

4. Operation .................................................................................... 7

Control Panel Operation................................................................................ 7

Control Options ............................................................................................. 7

Programming................................................................................................. 7

DMX Configuration........................................................................................ 7

DMX Personalities.......................................................................................................... 7

Starting Address............................................................................................................. 7

Menu Map ..................................................................................................... 8

Virtual Color Wheel ....................................................................................... 11

Virtual Color Wheel Chart .............................................................................................. 11

Color Temperature Chart ............................................................................................... 11

DMX Values .................................................................................................. 12

18Ch / 14Ch / 13Ch / 11Ch / 7Ch / 5Ch / 3Ch ............................................................... 12

1Ch................................................................................................................................. 13

HSV................................................................................................................................ 13

Standalone Configuration.............................................................................. 14

Static Mode .................................................................................................................... 14

Auto Programs ............................................................................................................... 14

Zoom .............................................................................................................................. 14

Master/Slave .................................................................................................................. 14

Dimmer Curve ................................................................................................................ 14

Dimmer Profiles.............................................................................................................. 15

Table of Contents

Ovation F-415FC User Manual Rev. 7

White Balance ................................................................................................................ 15

LED Frequency .............................................................................................................. 15

Fan Mode ....................................................................................................................... 15

Back Light ...................................................................................................................... 15

System Information ........................................................................................................ 15

Zoom Reset.................................................................................................................... 15

Factory Reset................................................................................................................. 15

5. Technical Information ................................................................ 16

Product Maintenance .................................................................................... 16

6. Technical Specifications ........................................................... 17

Warranty & Returns....................................................................................... 18

Ovation F-415FC User Manual Rev. 7

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate a claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Manual Conventions

Symbols

FCC Statement of Compliance

This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

• Ovation F-415FC

•Neutrik

® powerCON®power cord

• Gel frame holder (6.25 in/159 mm accessories)

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

<SET> A button on the product’s control panel

Settings A product function or a menu option

Symbol Meaning

Electrical warning. Not following these instructions may cause electrical damage to the

product, accessories, or the user.

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function correctly

if this information is not used.

Useful information.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Before You Begin

Ovation F-415FC User Manual Rev. 7

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

• The luminaire is intended for professional use only.

• If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord

or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer or its service

agent or a similar qualified person.

• CAUTION:

• This product’s housing may be hot when operating. Mount this product in a location with adequate

ventilation, at least 20 in (50 cm) from adjacent surfaces.

• When transferring the product from extreme temperature environments, (e.g., cold truck to warm

humid ballroom) condensation may form on the internal electronics of the product. To avoid causing

a failure, allow the product to fully acclimate to the surrounding environment before connecting it to

power.

• Flashing light is known to trigger epileptic seizures. User must comply with local laws regarding

notification of strobe use.

• ALWAYS:

• Disconnect from power before cleaning the product or replacing the fuse.

• Replace the fuse with the same type and rating.

• Use a safety cable when mounting this product overhead.

• Connect this product to a grounded and protected circuit.

•DONOT:

• Open this product. It contains no user-serviceable parts.

• Look at the light source when the product is on.

• Leave any flammable material within 1.64 ft (50 cm) of this product while operating or connected to

power.

• Connect this product to a dimmer or rheostat.

• Operate this product if the housing, lenses, or cables appear damaged.

• Operate this product outdoors or in any location where dust, excessive heat, water, or humidity may

affect it (adhere to standards for the published IP rating).

• ONLY use the hanging/mounting bracket to carry this product.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher

temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• In the event of a serious operating problem, stop using immediately.

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than

single LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is

40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit

the overall intensity.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If a Chauvet product requires service, contact Chauvet Technical Support.

Ovation F-415FC User Manual Rev. 7

Introduction

2. Introduction

Description

The Ovation F-415FC is a RGBAL Fresnel-style LED system. It projects a bright, beautifully soft field of

light, from subtle pastels to punchy saturates, and nearly any temperature of white. A motorized zoom with

a 27° to 68° field of angle allows users to add light where it is needed. Control of the virtual color wheel,

zoom, and output can be via DMX or on-board dials. It is also RDM-enabled to ease installation and offers

adjustable PWM for flicker-free user on camera.

Features

• Operating modes:

• 1-channel: dimmer

• 3-channel: dimmer, virtual color wheel, color temperature

• 5-channel: RGBAL control

• 7-channel: dimmer, RGBAL control, strobe

• 11-channel: 16-bit dimmer, RGBAL control, strobe, virtual color wheel, color temperature,

zoom

• 13-channel: 16-bit dimmer, RGBAL control, strobe

• 14-channel: dimmer, RGBAL control, strobe, virtual color wheel, color temperature, auto

programs, auto speed, control, zoom, motor reset

• 18-channel: 16-bit dimmer, 16-bit RGBAL, strobe, virtual color wheel, color temperature,

zoom, motor reset,

control

• HSV: hue, saturation, value

• Full-color LED (RGBAL) Fresnel-style lighting fixture for theater, film, and production

• Soft and even field of light

• Smooth, motorized zoom range from 14° to 68°

• Beautiful 16-bit dimming of master dimmer and individual colors

• Easy-to-use on-board control of color, zoom, and dimming

• Virtual color wheel with color matched to popular gel colors

• Color temperature presets from 2800 K to 6500 K

• RDM (remote device management) for added flexibility

• Adjustable PWM (pulse width modulation) to avoid flickering on camera

• Virtually silent operation for use in studio and theater applications

Product Overview

Menu buttons

Color temperature

Dimmer

Neutrik powerCON in/out

Tilt adjustment knob (x2)

Display

Zoom

DMX in/out

Fuse holder

Introduction

Ovation F-415FC User Manual Rev. 7

Product Dimensions

11.22 in

285 mm

6.25 in

159 mm

13.90 in

353 mm

15.04 in

382 mm

9.53 in

242 mm

6.25 in

159 mm

6.25 in

159 mm

Ovation F-415FC User Manual Rev. 7

Setup

3. Setup

AC Power

Each Ovation F-415FC has an auto-ranging power supply that works with an input voltage range of 100 to

240 VAC, 50/60 Hz. To determine the power requirements for each Ovation F-415FC, refer to the label

affixed to the product or to the Technical Specifications chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more

information, download Sizing Circuit Breakers from the Chauvet website: www.chauvetprofessional.com.

AC Plug

The Ovation F-415FC comes with a power input cord terminated with a Neutrik® powerCON® connector

on one end and an Edison plug on the other end (U.S. market). If the power input cord that came with the

product has no plug, or if the plug needs to be changed, use the table below to wire the new plug.

Power Linking

It is possible to power link Ovation F-415FC products. See the table below for the current draw at each

voltage and frequency:

Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.

Fuse Replacement

1. Disconnect this product from the power outlet.

2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.

3. Remove the blown fuse and replace with another fuse of the same type and rating (T 3.15 A, 250 V).

4. Screw the fuse holder cap back in place and reconnect power.

DMX Linking

The Ovation F-415FC can be linked to a DMX controller using a 3- and 5-pin DMX connection. If using

other DMX-compatible products with this product, it is possible to control each individually with a single

DMX controller.

DMX Personalities

The Ovation F-415FC uses a 3- and 5-pin DMX data connection for the HSV, 1Ch, 3Ch, 5Ch, 7Ch, 11Ch,

13Ch, 14Ch, and 18Ch DMX personalities.

• Refer to the Introduction for a brief description of each DMX personality.

• Refer to the Operation chapter to learn how to configure the Ovation F-415FC to work in these

personalities.

•TheDMX Values section provides detailed information regarding the DMX personalities.

Remote Device Management

Remote Device Management (RDM) is a standard for allowing DMX-enabled devices to communicate bi-

directionally along existing DMX cabling. Check with the manufacturer or the DMX controller’s User

Manual, as not all DMX controllers have this capability. The Ovation F-415FC supports RDM protocol that

allows feedback to make changes to menu map options.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

100 V, 60 Hz 120 V, 60 Hz 208 V, 60 Hz 230 V, 50 Hz 240 V, 60 Hz

Current Draw 1.289 A 1.048 A 0.987 A 0.925 A 0.888 A

Make sure to disconnect the product’s power cord before replacing a blown fuse. Always

replace the blown fuse with another of the same type and rating.

Setup

Ovation F-415FC User Manual Rev. 7

Master/Slave Connectivity

The Master/Slave mode allows an Ovation F-415FC (the master) to control one or more Ovation F-415FC

products (the slaves) without a DMX controller. One Ovation F-415FC becomes the master when running

an auto or custom program, or in Static mode.

Each slave’s control panel must be configured to operate in Slave mode. During Master/Slave operation,

the slaves will operate in unison with the master.

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.

For Chauvet Professional line of mounting clamps, go to: http://trusst.com/products/.

Orientation

Always mount this product in a safe position, ensuring that there is adequate room for ventilation,

configuration, and maintenance.

Rigging

Chauvet recommends using the following general guidelines when mounting this product:

• Before deciding on a location for the product, make sure there is easy access to the product for

maintenance and programming purposes.

• Make sure that the structure onto which the product will be mounted can support the product’s

weight. See the Technical Specifications for weight information.

• When mounting the product overhead, always use a safety cable. Mount the product securely to a

rigging point, whether an elevated platform or a truss.

• When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

•

When power linking multiple products, mount the products close enough for power-linking cables to reach

• The bracket adjustment knobs allow for directional adjustment when aiming the product to the desired

angle. Only loosen or tighten the bracket knobs manually. Using tools could damage the knobs.

Procedure

The Ovation F-415FC comes with a double-bracketed yoke that can be used as a floor stand or to which

mounting clamps can be attached for hanging. Mounting clamps must be purchased separately. Ensure that the

clamps can support the weight of this product. Use at least one mounting point per product where necessary.

Mounting Diagram

DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX

controller signals may interfere with the signals from the master.

•TheOperation section of this manual provides detailed instructions on how to configure

the master and slaves.

• For more information about DMX standards or the DMX cables needed to link this product

to a DMX controller, download the DMX primer from the Chauvet website:

www.chauvetprofessional.com.

Safety cable

(such as CH-05

from Chauvet)

Mounting clamp

(such as CTC-50 or CTC-50HCN

from Chauvet)

Mounting bracket

Bracket

adjustment knob

Overhead Mounting

Andere Handbücher für Ovation F-415FC

Inhaltsverzeichnis

Andere Chauvet Professional DJ-Equipment Handbücher

Chauvet Professional

Chauvet Professional Ovation E-910FC IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional RB-F50CM Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R1X Spot Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation C-805FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional EPIX STRIP TOUR Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUE R2X SPOT Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H12XIP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Amhaze Whisper Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation P-56FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK3 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION E-4WW IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue Outcast 2X Wash Bedienungsanleitung

Chauvet Professional

Chauvet Professional Strike P38 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation B-2805FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION E-910FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 1-Quad IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional EPIX BAR TOUR Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Solo Batten Bedienungsanleitung

Chauvet Professional

Chauvet Professional Rogue Outcast 1 Hybrid Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado Range IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELL Pad Bedienungsanleitung

Chauvet Professional

Chauvet Professional RB-F100CM Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung