Chauvet Professional OnAir IP panel min Bedienungsanleitung

User Manual

Model ID: ONAIRPANELMINIP

onAir IP Panel Min User Manual Rev. 1

Edition Notes

The onAir IP Panel Min User Manual includes a description, safety precautions, installation, programming,

operation and maintenance instructions for the onAir IP Panel Min as of the release date of this edition.

Trademarks

CHAUVET, the Chauvet logo and onAir IP Panel Min are registered trademarks or trademarks of Chauvet

& Sons, LLC (d/b/a Chauvet and Chauvet Lighting) in the United States and other countries. Other

company and product names and logos referred to herein may be trademarks of their respective

companies.

The works of authorship contained in this manual, including, but not limited to, all design, text and images

are owned by Chauvet.

Electronically published by Chauvet in the United States of America.

Manual Use

Chauvet authorizes its customers to download and print this manual for professional information purposes

only. Chauvet expressly prohibits the usage, copy, storage, distribution, modification, or printing of this

manual or its content for any other purpose without written consent from Chauvet.

Document Printing

For best results, print this document in color, on letter size paper (8.5 x 11 in), double-sided. If using A4

paper (210 x 297 mm), configure the printer to scale the content accordingly.

Intended Audience

Any person installing, operating, and/or maintaining this product should completely read through the guide

that shipped with the product, as well as this manual, before installing, operating, or maintaining this

product.

Disclaimer

Chauvet believes that the information contained in this manual is accurate in all respects. However,

Chauvet assumes no responsibility and specifically disclaims any and all liability to any party for any loss,

damage or disruption caused by any errors or omissions in this document, whether such errors or

omissions result from negligence, accident or any other cause. Chauvet reserves the right to revise the

content of this document without any obligation to notify any person or company of such revision, however,

Chauvet has no obligation to make, and does not commit to make, any such revisions. Download the latest

version from www.chauvetprofessional.com.

Document Revision

This onAir IP Panel Min User Manual is the 1st edition of this document. Go to

www.chauvetprofessional.com for the latest version.

onAir IP Panel Min User Manual Rev. 1 2

TABLE OF CONTENTS

1. Before You Begin ....................................................................... 1

What Is Included ........................................................................................... 1

Claims ........................................................................................................... 1

Text Conventions .......................................................................................... 1

Symbols ........................................................................................................ 1

FCC Compliance........................................................................................... 1

RF Exposure Warning for North America, and Australia............................... 1

Safety Notes.................................................................................................. 2

Personal Safety.................................................................................................. 2

Mounting and Rigging ........................................................................................ 2

Power and Wiring............................................................................................... 2

Operation ........................................................................................................... 2

Expected LED Lifespan................................................................................. 2

2. Introduction ................................................................................ 3

Description .................................................................................................... 3

Features........................................................................................................ 3

Product Overview.......................................................................................... 3

Product Dimensions ...................................................................................... 4

3. Setup ........................................................................................... 5

DC Power...................................................................................................... 5

AC Power...................................................................................................... 5

Installing the Power Supply................................................................................ 5

AC Plug .............................................................................................................. 5

Signal Connections ....................................................................................... 6

Control Personalities .......................................................................................... 6

DMX Linking....................................................................................................... 6

Remote Device Management (RDM)....................................................................... 6

Lumenradio CRMX™ Connection...................................................................... 6

Initial Setup.............................................................................................................. 6

Configuration ........................................................................................................... 6

Product Pairing ........................................................................................................ 6

USB Software Update ................................................................................... 7

Accessories................................................................................................... 7

Mounting ....................................................................................................... 8

Orientation.......................................................................................................... 8

Rigging ............................................................................................................... 8

Procedure........................................................................................................... 8

4. Operation .................................................................................... 9

Control Panel Description ............................................................................. 9

Control Options ............................................................................................. 9

Programming................................................................................................. 9

On Board Control .......................................................................................... 10

On Board Control Menu ..................................................................................... 10

Menu Map ..................................................................................................... 10

Home Screen ................................................................................................ 13

Example Home Screens .................................................................................... 13

Configuration (DMX) ..................................................................................... 13

Control Personalities .......................................................................................... 13

Starting Address................................................................................................. 13

onAir IP Panel Min User Manual Rev. 1

Control Channel Assignments and Values.................................................... 14

XYExtended(10)................................................................................................. 14

XYBasic(6) ......................................................................................................... 14

15Ch................................................................................................................... 14

11Ch................................................................................................................... 15

10Ch................................................................................................................... 15

8Ch..................................................................................................................... 16

6Ch..................................................................................................................... 16

5Ch..................................................................................................................... 16

4Ch..................................................................................................................... 16

3Ch..................................................................................................................... 16

1Ch..................................................................................................................... 16

Control Chart...................................................................................................... 17

Color Temperature Chart ................................................................................... 17

Configuration (Standalone) ........................................................................... 17

CCT Control ....................................................................................................... 17

HSV Control ....................................................................................................... 17

XY Control.......................................................................................................... 18

Preset CCTs....................................................................................................... 18

Manual Color Mixer ............................................................................................ 18

Effect Macros ..................................................................................................... 18

Configuration (Settings) ................................................................................ 18

Red Shift ............................................................................................................ 18

Master/Slave ...................................................................................................... 18

DMX Loss........................................................................................................... 18

Dimmer Curve .................................................................................................... 18

Dimmer Speed Mode ......................................................................................... 19

Color Calibration ................................................................................................ 19

Pulse Width Modulation ..................................................................................... 19

Wireless Lumenradio CRMX™ Settings ............................................................ 19

Toggle CRMX™ ...................................................................................................... 19

Receiver Reset ........................................................................................................ 19

Wireless to DMX...................................................................................................... 19

Fan Mode ........................................................................................................... 19

Display Backlight................................................................................................ 19

Information ......................................................................................................... 19

Factory Reset..................................................................................................... 19

5. Maintenance................................................................................ 20

Product Maintenance .................................................................................... 20

6. Technical Specifications ........................................................... 21

Returns............................................................................................ 22

Page 1 of 23

onAir IP Panel Min User Manual Rev. 1

Before You Begin

1. Before You Begin

What Is Included

Claims

Carefully unpack the product immediately and check the container to make sure all the parts are in the

package and are in good condition.

If the box or the contents (the product and included accessories) appear damaged from shipping, or show

signs of mishandling, notify the carrier immediately, not Chauvet. Failure to report damage to the carrier

immediately may invalidate your claim. In addition, keep the box and contents for inspection.

For other issues, such as missing components or parts, damage not related to shipping, or concealed

damage, file a claim with Chauvet within 7 days of delivery.

Text Conventions

Symbols

FCC Compliance

This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

RF Exposure Warning for North America, and Australia

Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of 20cm between

the radiator and your body. This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

• onAir IP Panel Min

• Seetronic Powerkon IP65 power cord

• DMX mini XLR adapter

• Ball-head mount

• Baby pin receiver

• Quick Reference Guide

Convention Meaning

1–512 A range of values

50/60 A set of values of which only one can be chosen

Settings A menu option not to be modified

<ENTER> A key to be pressed on the product’s control panel

Symbol Meaning

Critical installation, configuration, or operation information. Not following these

instructions may make the product not work, cause damage to the product, or cause

harm to the operator.

Important installation or configuration information. The product may not function

correctly if this information is not used.

Useful information.

Any reference to data or power connections in this manual assumes the use of Seetronic

IP rated cables.

The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data

transmission protocol.

Page 2 of 23

Before You Begin

onAir IP Panel Min User Manual Rev. 1

Safety Notes

Read all the following safety notes before working with this product. These notes contain important

information about the installation, usage, and maintenance of this product.

Personal Safety

• Avoid direct eye exposure to the light source while the product is on.

• Always disconnect the product from the power source before cleaning or replacing the fuse.

• Always connect the product to a grounded circuit to avoid the risk of electrocution.

• Do not touch the product’s housing when operating because it may be very hot.

Mounting and Rigging

• The product is intended for professional use only.

• Do not submerge this product (IP65). Temporary outdoor operation is fine.

• When using this product in an outdoor environment, use IP65 (or higher) rated power and data

cables. Secure unused power and data ports with attached IP65 covers.

•

CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm

humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a

failure, allow product to fully acclimate to the surrounding environment before connecting it to power.

• Not for permanent outdoor installation in locations with extreme environmental conditions. This

includes, but is not limited to:

• Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).

• Locations where the normal high or low temperatures exceed the temperature ranges in this manual.

• Locations that are prone to flooding or being buried in snow.

• Areas where the product will be subjected to extreme radiation or caustic substances.

• Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.

• The product should be positioned so that prolonged staring into it at a distance closer than 19.7 in

(50 cm) is not expected.

• Make sure there are no flammable materials within 7.87 in (20 cm) of this product while it is operating.

• When hanging this product, always secure to a fastening device using a safety cable.

• Never carry the product by the power cord.

Power and Wiring

• Make sure the power cord is not crimped or damaged.

• Ensure that the product is connected to the proper voltage in accordance with the specifications in

this manual or on the product’s specification label.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely

disconnect the product from power via breaker or by unplugging it.

• Never connect this product to a dimmer pack or rheostat.

• Make sure to replace the fuse with another of the same type and rating.

• Never disconnect this product by pulling or tugging on the power cable.

• If the external flexible cable or cord of this product is damaged, it shall be replaced with a special

cable or cord exclusively available from the manufacturer or its service agent.

• The light source contained in this luminaire shall only be replaced by the manufacturer, its service

agent, or a similarly qualified person.

Operation

• Do not operate this product if there is damage on the housing, lenses, or cables. Have the damaged

parts replaced by an authorized technician at once.

• Do not cover the ventilation slots when operating to avoid internal overheating.

• The maximum ambient temperature is 113 °F (45 °C). Do not operate the product at higher temperatures.

• The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.

• The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.

• In the event of a serious operation problem, stop using this product immediately!

Expected LED Lifespan

Over time, use and heat will gradually reduce LED brightness. Clustered LEDs produce more heat than single LEDs,

contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000

hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity.

This product contains no user-serviceable parts. Any reference to servicing in this User

Manual will only apply to properly trained, certified technicians. Do not open the housing

or attempt any repairs.

All applicable local codes and regulations apply to proper installation of this product.

If your Chauvet product requires service, contact Chauvet Technical Support.

Page 3 of 23

onAir IP Panel Min User Manual Rev. 1

Introduction

2. Introduction

Description

The onAir IP Panel Min is a small and rugged IP65, full-spectrum LED soft light capable of facing all of the

elements, outdoors or in. Ready to go on-location, or squeeze into any studio space with a low trim, the

onAir IP Panel Min also features a superior quality of white light with high CRI/TLC and TM-30 scores; a

smooth 16-bit dimming curve and +/- green adjustment, an emulated redshift, and the ability to produce a

pop of color to achieve the exact look you are aiming to create along with built-in, customizable effects

accessible from the onboard LED menu. Conveniently switch mounting options from the Ball Head Mount

with included adapters for a Baby Pin Receiver or a threaded insert for attaching a clamp. The rugged build

is designed with a drop-in slot to ensure ease of use when changing accessories. PWM, DMX, RDM,

CRMX, and an onboard control option ensure camera-ready use. Its small size makes it super portable,

and you can remove the main power supply for a 28 VDC input via 3-pin XLR to power the fixture from an

external battery pack to add increased flexibility for all of your remote needs.

Features

• Full-spectrum LED mini soft light panel style fixture for broadcast, film, and special events

• IP65 rating for all weather use indoors or out.

• Linear color temperature presets from 2800 K to 8000 K with high CRI and CQS

• Virtual color wheel with color matched to popular gel colors

• +/- Green adjustment and emulated red-shift via DMX or on-board control

• RDM (Remote Device Management) and CRMX wireless control for added flexibility

• Adjustable PWM (Pulse Width Modulation) to avoid flickering on camera

• Completely silent operation for use in studio applications

• Ultra-smooth 16-bit dimming curves and speeds to complement any lighting scheme.

• Easily switch mounting options from clamp mount on a ball head to baby pin

• Drop-in slot for accessories (sold separately)

• Rugged design for years of rough use in the most extreme conditions.

• Easy to use on-board control with full access to all the features of the fixture without the need for a

dedicated controller.

• USB port for fixture software updates

• Compact design perfect for run-and-gun or indoor installation

• 28 VDC power input via 3-pin XLR to power the fixture from an external battery pack

Product Overview

LCD

display

Mini 5-pin

DMX port

Power

Control knobs/

menu button

USB C

port

28 VDC

power

28 VDC

power

out

Page 4 of 23

Introduction

onAir IP Panel Min User Manual Rev. 1

Product Dimensions

5.64 in

143.2 mm

4.31 in

109.4 mm

10 in

254 mm

3.15 in

80 mm

3.74 in

95 mm

5.28 in

134.2 mm

Page 5 of 23

onAir IP Panel Min User Manual Rev. 1

Setup

3. Setup

DC Power

The onAir IP Panel Min has a 3-pin IP65 XLR power input that can work with an input voltage of 28 VDC,

50 W.

AC Power

The onAir IP Panel Min has an auto-ranging external power supply that can work with an input voltage

range of 100–240 VAC, 50/60 Hz and converts it to a 28 V DC, 50 W 3-pin IP65 XLR output.

To determine the product’s power requirements (circuit breaker, power outlet, and wiring), use the current

value listed on the label affixed to the product’s back panel, or refer to the product’s specifications chart.

The listed current rating indicates the product’s average current draw under normal conditions.

Installing the Power Supply

The power supply attaches to the onAir IP Panel Min with a retaining pin.

1. Align the power supply so the loop on the back of the product and the loop on the power supply

line up and fit into each other.

2. Press and hold the latch button down on the retaining pin and insert it through the sets of loops on

the product and power supply.

3. Release the latch button.

AC Plug

The onAir IP Panel Min comes with a power input cord terminated with a Seetronic Powerkon IP65

connector on one end and an Edison plug on the other end (U.S. market). If the power input cord that

came with your product has no plug, or if you need to change the plug, use the table below to wire the new

plug.

• Always connect the product to a protected circuit (a circuit breaker or fuse). Make sure

the product has an appropriate electrical ground to avoid the risk of electrocution or

fire.

• To eliminate unnecessary wear and improve its lifespan, during periods of non-use

completely disconnect the product from power via breaker or by unplugging it.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

Connection Wire (U.S.) Wire (Europe) Screw Color

AC Live Black Brown Yellow or Brass

AC Neutral White Blue Silver

AC Ground Green/Yellow Green/Yellow Green

Latch button

Page 6 of 23

Setup

onAir IP Panel Min User Manual Rev. 1

Signal Connections

The onAir IP Panel Min can receive a wired DMX or wireless Lumenradio CRMX™ signal. The product has

a mini 5-pin DMX in port.

Control Personalities

The onAir IP Panel Min uses a mini 5-pin DMX data connection or wireless CRMX™ for its 11 control

personalities: 1Ch, 3Ch, 4Ch, 5Ch, 6Ch, 8Ch, 10Ch, 11Ch, 15Ch., XYBasic(6), and

XYExtended(10).

• Refer to the Operation chapter to learn how to configure the onAir IP Panel Min to work in these

personalities.

• The Control Channel Assignments and Values section provides detailed information regarding the

control personalities.

DMX Linking

You can link the onAir IP Panel Min to a DMX controller using a mini 5-pin DMX connection or a CRMX™

connection. For more information about DMX, read the DMX primer at: https://

www.chauvetprofessional.com/wp-content/uploads/2016/06/DMX_Primer.pdf.

Remote Device Management (RDM)

Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate

bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the

manufacturer as not all DMX controllers have this capability. The onAir IP Panel Min supports RDM

protocol that allows feedback to make changes to menu map options.

Lumenradio CRMX™ Connection

In optimal conditions, the onAir IP Panel Min can operate up to 300 m (900 ft) away from the CRMX™

transmitter, The CRMX™ receiver in the onAir IP Panel Min must be paired with the CRMX™ transmitter

for wireless operation.

Initial Setup

1. Turn the CRMX™ transmitter on.

2. Connect the CRMX™ transmitter to a DMX controller.

3. Place the onAir IP Panel Min within 300 m from the CRMX™ transmitter.

4. Turn the onAir IP Panel Min on.

Configuration

1. From the onAir IP Panel Min’s control panel, go to DMX Address.

2. Select the start address, as with any other DMX compatible product.

3. Go to Wireless Setting > Receive On/Off.

4. Select On. (The Signal Strength Indicator will show a ?in front of the bars)

5. Press the reset button on the CRMX™ transmitter. (The Signal Strength Indicator on the

onAir IP Panel Min will show a ϟin front of the bars for 3 seconds while a connection is

established.)

Product Pairing

If the onAir IP Panel Min has already been paired with the CRMX™ transmitter, the Signal Strength

Indicator on top of the display will show the strength of the signal. In this case, the onAir IP Panel Min is

ready to work in Wireless mode.

Pairing the onAir IP Panel Min and a New CRMX™ Transmitter

1. From the onAir IP Panel Min control panel, go to Wireless Setting > Receive Reset.

2. Select Yes.

3. From the CRMX™ transmitter, press <RESET>. The signal indicator on the transmitter will flash.

4. Once the transmitter has found the onAir IP Panel Min, the signal indicator on the CRMX™

transmitter will illuminate solid.

5. The display screen on the onAir IP Panel Min will show the strength of the signal.

If you are not familiar with or need more information about DMX standards or the DMX

cables needed to link this product to a DMX controller, download the DMX Primer from the

Chauvet website: www.chauvetprofessional.com.

CRMX™ operation can be interrupted or inhibited by people or liquid masses, including

water or snow, between the transmitter and receiver. For best results, keep the area

between the transmitter and receiver clear of any liquid masses.

Andere Handbücher für onAir IP panel min

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chauvet Professional Beleuchtungsausrüstung Handbücher

Chauvet Professional

Chauvet Professional Ovation FD-205WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION P-56VW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional 91LEDs Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKEARRAY2 Bedienungsanleitung

Chauvet Professional

Chauvet Professional WELL STX 360 Bedienungsanleitung

Chauvet Professional

Chauvet Professional PVP S5 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick Silens 2 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLOR Strike M Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-415FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORado 2 Zoom Tour Bedienungsanleitung

Chauvet Professional

Chauvet Professional MT-07 Bedienungsanleitung

Chauvet Professional

Chauvet Professional MAVERICK STOM 2 PROFILE Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-265WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional STRIKE 1 Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation F-915FC Bedienungsanleitung

Chauvet Professional

Chauvet Professional Maverick MK3 Profile Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation E-190WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional Ovation H-55WW Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H7X Bedienungsanleitung

Chauvet Professional

Chauvet Professional OVATION REVE E-3 Bedienungsanleitung

Chauvet Professional

Chauvet Professional onAirPanel1IP Bedienungsanleitung

Chauvet Professional

Chauvet Professional ROGUER3BEAM Bedienungsanleitung

Chauvet Professional

Chauvet Professional COLORdash Par-H12XIP Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung

Chauvet Professional onAir IP panel min Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken