Quality, Legislation & Exclusions
Page 10 Section 5.0
5.1 Quality
All Checkmate products are
manufactured under ISO 9001 and
to the highest standards. The scope of
use within the certification held allows
Checkmate to design, manufacture and
test Personal Protection Equipment.
Horizontal tensile test machine,
abrasion testers and dynamic drop test
rig are just part of the full range of test
facilities used to ensure ultimate safety
of our product range.
All Checkmate systems must only be
installed by Checkmate personnel or an
approved installer. Strict training is given
and written exam are completed before
full certification can be given to installers.
5.2 Legislation and Standards
The TR3 Tripod has been designed
to meet the requirements of ANSI
Z359.18:2017, A10.32.12,
OSHA 1910 and OSHA 1926 Subpart M
For clarification on any certification
issues contact Checkmate.
5.3 Exclusions
Checkmate holds global product
liability cover for your safety.
Checkmate will NOT however be
responsible for:
Users who are out of the scope of any
written manuals of training given.
Any systems that have NOT been
inspected under the current legislation.
Operators who do not use load limiting
PPE.
Devices that have been damaged.
The Max weight has been exceeded.
Devices that have NO serial number
markings, and the manufacturers name.
Checkmate Lifting & Safety Ltd present.
Rescue and Risk Assessment
Suitable planning and risk assessment
should be carried out by the user and or
supervisor. A suitable rescue plan and
equipment shall be in place to minimise
post fall suspension time. Checkmate
can offer a complete range of rescue
equipment to suit your requirements.
