Checkpoint Classic IP Street Bedienungsanleitung

Classic IP Street

Installation Manual

Version *60

P/N

10039305

Classic IP Street Installation Manual Rev. *60

2 of 27

Classic IP Street Installation Manual

Released 01/12/2012.

Published by:

Checkpoint Systems Inc.

101 Wolf Drive

Thorofare, NJ 08086

Document revision information

Classic IP Street Installation Manual, version *60

Rev Description Date Author

*60 CR2632A 12/26/2011 Norman Wu, Chris Zheng

Trademarks

Checkpoint is a registered trademark of Checkpoint Systems, Inc.

Information in this document is subject to change without notice.

Other products © or ® their respective manufacturers or copyright holders.

Companies, names and data used in examples herein are fictitious unless otherwise noted. No part of the contents of

this book may be reproduced or transmitted in any form or by any means without the written permission of the

publisher.

The information in this document is subject to change without notice.

Because of the changing nature of this product information presented in the Classic IP Street Installation Manual,

Checkpoint Systems, Inc. is not liable for any omissions, misstatements, or other errors of information.

The information presented in this document may not be copied, used or disclosed to others for the purpose of

procurement or manufacturing without the written permission of Checkpoint Systems, Inc. This guide and the

products discussed in this guide are the exclusive property of Checkpoint Systems Inc. Copyright laws of the United

States protect all information and products.

Classic IP Street Installation Manual Rev.*60

3 of 27

Important Information to our Users in North America

FCC Regulatory Compliance Statement

Checkpoint Systems, Inc., offers Electronic Article Surveillance (EAS) or Radio Frequency

Identification Products that have been FCC certified or verified to 47 CFR Part 15 Subparts B/C

and/or 47 CFR Part 18. Appropriately, one of the following labels will apply to the approval:

NOTE: This equipment has been tested and found to comply with the limits for a class A digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

- OR -

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) including this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation, which may include intermittent decreases in detection and/or

intermittent increases in alarm activity.

- OR –

NOTE: This equipment has been tested and found to comply with the limits for a

miscellaneous type ISM device, pursuant to Part 18 of the FCC Rules. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio

communications reception, which can be determined by turning the equipment off and on,

please contact Checkpoint Systems, Inc., at 1 (800) 257-5540 for further assistance.

Industry Canada

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry

Canada. To reduce potential radio interference to other users, the antenna type and its

gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not

more than that necessary for successful communication.

This radio transmitter (identify the device by certification number, or model number if

Category II) has been approved by Industry Canada to operate with the antenna types

listed below with the maximum permissible gain and required antenna impedance for

Classic IP Street Installation Manual Rev.*60

4 of 27

each antenna type indicated. Antenna types not included in this list, having a gain greater

than the maximum gain indicated for that type, are strictly prohibited for use with this

device

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired

operation of the device

To reduce potential radio interference to other users, the antenna type and its gain should

be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than

that permitted for successful communication.

Industrie Canada

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour

l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage

radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son

gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas

l'intensité nécessaire à l'établissement d'une communication satisfaisante.

Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son

numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie

Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain

admissible maximal et l'impédance requise pour chaque type d'antenne. Les types

d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal

indiqué, sont strictement interdits pour l'exploitation de l'émetteur

Le fonctionnement de l’ appareil est soumis aux deux conditions suivantes:

1. Cet appareil ne doit pas perturber les communications radio, et

2. cet appareil doit supporter toute perturbation, y compris les perturbations qui

pourraient provoquer son dysfonctionnement.

Pour réduire le risque d'interférence aux autres utilisateurs, le type d'antenne et son gain

doivent être choisis de façon que la puissance isotrope rayonnée équivalente (PIRE) ne

dépasse pas celle nécessaire pour une communication réussie.

Classic IP Street Installation Manual Rev.*60

5 of 27

Equipment Safety Compliance Statement

Checkpoint Systems’ EAS or Radio Frequency Identification products have been designed to be

safe during normal use and, where applicable, certain components of the system or accessory

sub-assemblies have been certified, listed or recognized in accordance with one or more of the

following Safety standards: UL 1012, UL 1037, UL 1310, UL 60950-1, CSA C22.2 No. 205,

CSA C22.2 No. 220, CSA C22.2 No. 223, CSA C22.2 No. 60950-1. Additional approvals may

be pending.

WARNING: Changes or modifications to Checkpoint’s EAS or Radio Frequency Identification

(RFID) equipment not expressly approved by the party responsible for assuring compliance

could void the user’s authority to operate the equipment in a safe or otherwise regulatory

compliant manner.

Important Information to our Users in Europe

CE Regulatory Compliance Statement

Where applicable, Checkpoint Systems, Inc., offers certain Electronic Article Surveillance (EAS)

products that have CE Declarations of Conformity according to R&TTE Directive 99/5/EC.

System Electromagnetic Compatibility (EMC), has been tested and notified through Spectrum

Management Authorities if necessary, using accredited laboratories, whereby, conformity is

declared by voluntarily accepted European Telecommunications Standards Institute (ETSI)

standards EN 301489-3 and EN 300330-2.

NOTE: Certain Electronic Article Surveillance (EAS) equipment have been tested and found to

conform with the CE emission and immunity requirement in Europe. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications. Under unusual

circumstances, interference from external sources may degrade the system performance, which

may include intermittent decreases in detection and/or intermittent increases in alarm activity.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment experiences frequent interference from external sources or does cause harmful

interference to radio communications reception, which can be determined by turning the

equipment off and on, please contact a Checkpoint Systems representative for further assistance.

Classic IP Street Installation Manual Rev.*60

6 of 27

Equipment Safety Compliance Statement

Checkpoint Systems Electronic Article Surveillance products have been designed to be safe

during normal use and, where applicable, certain components of the system or accessory sub-

assemblies have been declared safe according to the European Low Voltage Directive (LVD) by

being certified, listed, or recognized in accordance with one or more of the following European

safety standards; EN 60950, EN 50364, EN 60742.

WARNING: Changes or modifications to Electronic Article Surveillance equipment not

expressly approved by the party responsible for assuring compliance could void the user’s

authority to operate the equipment in a safe or otherwise regulatory compliant manner additional

approvals may be pending.

Classic IP Street Installation Manual Rev. *60

7 of 27

Table of Contents

ABLE OF

ONTENTS

.................................................................................................................................................7

INSTALLATION OVERVIEW .................................................................................................................................9

VERVIEW

.................................................................................................................................................................9

EQUIREMENTS

.........................................................................................................................................................9

Tools.....................................................................................................................................................................9

Parts...................................................................................................................................................................10

NSTALLATION

UTLINE

..........................................................................................................................................10

PHYSICAL INSTALLATION .................................................................................................................................11

VERVIEW

...............................................................................................................................................................11

Aisle Width .........................................................................................................................................................11

OWER

UPPLY

........................................................................................................................................................11

Placement...........................................................................................................................................................11

NTENNA

OUNTING

.............................................................................................................................................12

Mounting Hardware...........................................................................................................................................12

Wire Routing ......................................................................................................................................................13

ANTENNA WIRING ................................................................................................................................................14

VERVIEW

...............................................................................................................................................................14

ENERAL

IRING

NSTRUCTION

.............................................................................................................................14

Wiring between Chassis Box /SSB .....................................................................................................................16

Wiring 24VDC power supply .............................................................................................................................18

INGLE

ISLE

IRING

.............................................................................................................................................19

Secondary antenna (SSB) wiring........................................................................................................................19

Chassis Box wiring.............................................................................................................................................20

ELECTRONICS SETTING .....................................................................................................................................22

VERVIEW

...............................................................................................................................................................22

The Jumper setting for coupler aiming to antenna tuning .................................................................................22

List of Ferrites for Classic IP Street ..................................................................................................................23

ANTENNA DIMENSIONS.......................................................................................................................................24

LASSIC

TREET

SSB..........................................................................................................................................24

POWER SUPPLIES ..................................................................................................................................................25

VERVIEW

...............................................................................................................................................................25

OWER

UPPLY

SED IN

NITED

TATES

................................................................................................................25

OWER

UPPLY

SED

UROPE

............................................................................................................................27

Classic IP Street Installation Manual Rev. *60

8 of 27

C H A P T E R

INTRODUCTION

This Installation Manual details the steps necessary for the proper installation and configuration of

the Classic IP Street systems.

In this manual, most illustrations and pictures will show the Classic IP Street as a place of

reference, but it is to be understood that each antenna would be installed in the same manner

(unless otherwise noted).

Classic IP Street front view

Classic IP Street side view

Figure 1 Classic IP Street antenna front and side view

Classic IP Street Installation Manual Rev. *60

9 of 27

C H A P T E R

INSTALLATION OVERVIEW

Overview

This chapter is an overview of the installation process:

1. Requirements: Tool and part requirements for a typical installation.

2. Installation Outline: Lists the basic installation steps in sequence.

Requirements

Tools

The following tools are required for Classic IP Street Antenna installations:

Arrow T-25 Staple Gun

Diagonal wire cutter

Hammer drill with 3/16” and 1/2” bits

Extension cord

Tape Measure

Hammer

Snap Off

Marker, Black Felt

Ratchet driver with 9/16” socket

Screwdrivers, mini, regular and #2 Phillips

Hacksaw

Utility knife

Wire Snake

Wire Strippers

Wrench, combination end 9/16”

Classic IP Street Installation Manual (This manual)

Tuning Procedure, TR4210 Checkpoint PN 7102103

Checkpoint Systems Field Service Diagnostic Management Software (DMS version

1.8.31 or later version) installed on a laptop with the appropriate cables. DMS is an

Classic IP Street Installation Manual Rev.*60

10 of 27

application developed to install and configure TR4210 boards via serial connections.

DMS provides for firmware updates without replacement of microchips.

Parts

Quantity will vary according to site.

18 AWG 2-conductor (STP)

CAT5e cable

22 AWG 4-conductor (STP) (5594)

1/2” Anchor Bolts

*DekDuct (wire chase)

*Wiremold (1500 or 2600 series)

*Wiremold anchor bolts Note:

*Wire routing methods will vary by installation.

Installation Outline

Follow this sequence to successfully install the components:

1. Determine optimal antenna placement based upon antenna type, tag type, and door

opening width. (Refer to the TR4210 Product Reference Guide)

2. Determine power supply requirements and the ideal power supply location. (See

“Appendix 2 Power Supplies”)

3. Physically mount the antennas.

4. Connect the antenna wiring.

5. Install peripherals.

6. Configure the system using DMS.(Refer to test procedure P/N 7251662)

The information covered in steps 1 and 2 is generally used during the survey and planning stage,

but it is important for the installer to keep these specifications in mind to ensure that the systems

are installed to specification.

Inhaltsverzeichnis

Andere Checkpoint Antenne Handbücher

Checkpoint

Checkpoint Evolve F10 Bedienungsanleitung

Beliebte Antenne Handbücher anderer Marken

Alfa Network

Alfa Network APA-L01 Bedienungsanleitung

Naval

Naval PR-422CA Bedienungsanleitung

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Bedienungsanleitung

TERK Technologies

TERK Technologies TV44 Bedienungsanleitung

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Bedienungsanleitung

HP J8999A Bedienungsanleitung

MobilSat

MobilSat MSP-S Bedienungsanleitung

Steren

Steren ANT-UHF 13 Bedienungsanleitung

Novatel

Novatel 600-G Bedienungsanleitung

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Bedienungsanleitung

TRENDnet

TRENDnet TEW-AO12O Bedienungsanleitung

Radio Shack

Radio Shack 15-1837 Bedienungsanleitung

CommScope

CommScope CMAX-OMFX-43M-I53 Bedienungsanleitung

Ramsey Electronics

Ramsey Electronics DAP25 Bedienungsanleitung

COBHAM

COBHAM SAILOR 800 VSAT Gebrauchs- und Pflegehandbuch

Trango Systems

Trango Systems AD900-9 Bedienungsanleitung

Steren

Steren ANT-100 Bedienungsanleitung

Proxim

Proxim 5054-PA-23 Bedienungsanleitung