ChekOne SECURITY-PRO Bedienungsanleitung

ChekOne SECURITY-PRO

User Guide

ChekOne SECURITY-PRO User Guide

CheckOne SECURITY-PRO User Guide

Understanding Your ChekOne Device

1.1

How to Scan

1.2

How to make an 'Assist Call'

1.3

How to make a '911 Call'

1.4

How To Make a Phone Call

1.5

How to Read a Message

1.6

How to Reset the Lone Worker Timer

1.7

How to Reduce Lone Worker Time Interval

1.8

How to Restore Lone Worker Time Interval

1.9

How to Charge Your ChekOne Device

1.10

How To Reset your ChekOne Device

1.11

ChekOne SECURITY-PRO User Guide - 3

CheckOne SECURITY-PRO

User Guide

ChekOne SECURITY-PRO User Guide - 4

Understanding Your ChekOne Device

ChekOne Device - Front View

1 - Scan engine beam output.

2 - Status Light: displays green when charged, red when charging

3 - Service Status Panel: displays signal strength, GPS on, number of satellites acquired, local

time, message received, battery charge indicator and percentage or battery charge.

4 - Home Screen: Colour display screen - See Display screen description details following.

5 - Information Panel: displays scanned barcode and transmitting progress.

6 - Microphone: allows callers to hear you when you are speaking to them.

7 - Micro USB Connector: allows you to connect a charger or USB cable to the device.

8 - Battery Retainer: water resistant battery retainer to access the battery.

9- Replaceable display screen cover.

ChekOne SECURITY-PRO User Guide - 5

10 - Navigation (Nav) Pad: allows you to step UP and Down when navigating on a screen or Menu,

Allows you to navigate LEFT or Right to select an item or return to the home Screen.

11 - External Speaker: allows you to hear the caller.

ChekOne Device - Service Status Panel Details

1 - Signal Strength Indicator: shows the signal strength - 1 bar is low, 4 bars is maximum strength.

2 - GPS indicator: will display when the GPS function is turned on.

3 - Satellites Acquired Number: displays the number of GPS stilt's acquired by the device.

4 - Time: displays the local time of day.

5 - Message Indicator: when displayed there are unread messages in your inbox.

6 - Battery Level Indicator: displays battery level.

7 - Percentage of Charge Indicator: displays the percentage of battery charge remaining.

ChekOne Device - Navigation (NAV) Pad

1 - Press Right to scan a barcode or to select an item highlighted on the display screen.

2 - Press UP to step up on the display screen

3 - Press BACK to return to the Home screen or select the option displayed at the bottom of the

ChekOne SECURITY-PRO User Guide - 6

display screen.

4 - Press Down to step down on the display screen.

ChekOne Device - Bottom End View

1 - Micro USB Connector: allows you to connect a charger or USB cable to the device. (pull flap

down to access USB connector.

2 - Charging Contacts: For charging in desktop and dash mount chargers. (coming soon)

3 - Battery Retainer: remove to access the battery.

ChekOne SECURITY-PRO User Guide - 7

How to Scan

How to scan with your ChekOne device

Scanning Basics

Scanning Basics;

If the display screen is off press RIGHT on the Nav Pad, the display will turn on and SCAN will be

highlighted on the display screen. Press Right again.

If the display is on ensure that SCAN is highlighted and press Right on the NAV Pad.

Adjust beam over barcode. Optimal scanning distance is from 1 to 3 inches (3 to 8 cm)

depending on light conditions.

Scanner will beep and beam will turn off when barcode is read.

If the barcode did not read correctly 'No Barcode Scanned' will be displayed in the Information

panel at the bottom of the display.

Scan the barcode again.

ChekOne SECURITY-PRO User Guide - 8

Step 1 - Scan your ID

At the start of your shift scan your ID barcode.

ChekOne SECURITY-PRO User Guide - 9

Step 1a Scan your ID

After transmitting your name will be displayed at the bottom or the home page.

Step 2 - Scan Property Barcode

Scan the Location barcode for the property you are working at as instructed by the system

administrator.

Note: If location barcodes are not being used proceed to Step 3

Step 3 - Scan barcodes locationed at the property.

Proceed to scan all barcodes at the property as directed.

ChekOne SECURITY-PRO User Guide - 10

Step 4 - Scan Shift End Barcode

When your shift is complete scan the 'Shift End' barcode supplied by the system administrator.

Inhaltsverzeichnis

Beliebte Handheld Handbücher anderer Marken

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell CN75 Bedienungsanleitung

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung