CHERUBINI Ocean Bedienungsanleitung

ISTRUZIONI - INSTRUCTIONS - EINSTELLANLEITUNGEN

INSTRUCTIONS - INSTRUCCIONES

Ocean

MOTORI TUBOLARI

TUBULAR MOTORS

ROHRMOTOREN

MOTEURS TUBULAIRES

MOTORES TUBULARES

- To prevent any danger or malfunction, the size of electrical control components

connected to the motor must be compatible with the electrical features of the motor.

- Means for disconnection must be incorporated in the xed wiring in accordance with

the national installation standards.

- The selectors inverting the direction of rotation of the motor must be provided with

mechanical interlocking.

- Invert the brown and the black conductor to change the direction of rotation.

- NEVER connect two or more motors to the same selector (parallel connection) If you

couple two motors, use multi-poles selectors only.

- NEVER connect two or more selectors to the same motor.

- For outdoor use, provide the appliance with a supply cable

with designation H05RN-F containing at least 2% of

carbon.

ELECTRICAL CONNECTIONS

TRANSLATION OF THE ORIGINAL INSTRUCTIONS

1- brown

2- black

3- blue

4- yellow-green

HOW TO PREPARE THE MOTOR

NB: If you use tubes with a round form, the driving pulley must be xed to the tube, and

the installation is to be paid by the person who installs the system. For other tube sections

the xing is optional but strongly recommended.

STOP RING NUT ADAPTOR

DRIVING PULLEY

STOP RING NUT

1. Insert the adaptor in the stop ring nut

mating the groove with the reference notch

and push till they touch.

2. Fix the driving pulley on the motor pin

until the stop pin clicks.

3. Insert the motor fully in the rolling tube.

ADJUSTEMENT OF THE LIMIT SWITCHES

Ocean tubular motors are provided with a system of electromechanical limit switches

that stop the feed when the awning or the rolling shutter get to the maximum opening or

closing limits.To adjust these limits and adapt them to any need, simply screw or unscrew

the two adjusting screws on the motor head. The limits of the limit switches are preset at

about three turns of the roller.

1. To decide which adjusting screw to x, simply watch the direction of rotation of the stop

ring nut: if the stop ring nut pulled by the roller goes in direction A, use the adjusting

screw A to set the limit switch in that direction. If it goes to the opposite direction (B),

use the adjusting screw B.

2. Start up the awning or the rolling shutter in the direction in which you wish to set the

rst limit switch. After a few turns the motor will stop on the preset stop.

3. Screw the adjusting screw suited to the direction (see point 1.) in direction “+” till it

gets to the chosen position.

4. Invert the engine sense of direction and set the second limit switch.

STOP RING NUT

ADJUSTING SCREWS

STOP RING NUT

Hereby, Cherubini S.p.A. declares that the OCEAN motors are compliant to UE Directives:

Directive 2006/42/EC on machinery.

Directive 2014/35/EU safety of electrical equipment LVD.

Directive 2014/30/EU on electromagnetic compatibility.

The full text of the EU declaration of conformity is available upon request at the following

website: www.cherubini.it.

DECLARATION OF CONFORMITY

Rev: 12 04/2018 - Cod: A4516_6191

CHERUBINI Deutschland GmbH

Siemensstrasse, 40 - 53121 Bonn - Deutschland

Tel. +49 (0) 228 962 976 34 / 35 | Fax +49 (0) 228 962 976 36

info@cherubini-group.de | www.cherubini-group.de

CHERUBINI France S.a.r.l.

ZI Du Mas Barbet

165 Impasse Ampère

30600 Vauvert -France

Tél. +33 (0) 466 77 88 58 | Fax +33 (0) 466 77 92 32

info@cherubini.fr | www.cherubini.fr

CHERUBINI Iberia S.L.

Avda. Unión Europea 11-H

Apdo. 283 - P. I. El Castillo

03630 Sax Alicante - Spain

Tel. +34 (0) 966 967 504 | Fax +34 (0) 966 967 505

info@cherubini.es | www.cherubini.es

CHERUBINI S.p.A.

Via Adige 55

25081 Bedizzole (BS) - Italy

Tel. +39 030 6872.039 | Fax +39 030 6872.040

info@cherubini.it | www.cherubini.it

Inhaltsverzeichnis

Andere CHERUBINI Motor Handbücher

CHERUBINI

CHERUBINI Plug & Play 3000 Bedienungsanleitung

CHERUBINI

CHERUBINI BLUE TRONIC RX Series Bedienungsanleitung

CHERUBINI

CHERUBINI BLUE WAVE RX Bedienungsanleitung

CHERUBINI

CHERUBINI Plug&Play Short RX Bedienungsanleitung

CHERUBINI

CHERUBINI Ocean RX Bedienungsanleitung

CHERUBINI

CHERUBINI BLUE GARDA Series Bedienungsanleitung

CHERUBINI

CHERUBINI Plug&Play Ocean Easy Bedienungsanleitung

CHERUBINI

CHERUBINI Garda RX Bedienungsanleitung

CHERUBINI

CHERUBINI Tronic RX Bedienungsanleitung

CHERUBINI

CHERUBINI Tronic RX Bedienungsanleitung

CHERUBINI

CHERUBINI Plug&Play Ocean Easy Bedienungsanleitung

CHERUBINI

CHERUBINI Garda Bedienungsanleitung

CHERUBINI

CHERUBINI Plug&Play Short RX Bedienungsanleitung

CHERUBINI

CHERUBINI Plug&Play Bedienungsanleitung

CHERUBINI

CHERUBINI BLUE OCEAN Series Bedienungsanleitung

CHERUBINI

CHERUBINI Plug Bedienungsanleitung

CHERUBINI

CHERUBINI Plug & Play Plus Bedienungsanleitung

CHERUBINI

CHERUBINI MODO RX Bedienungsanleitung

CHERUBINI

CHERUBINI WAVE LOCK RX Bedienungsanleitung

Beliebte Motor Handbücher anderer Marken

Rotax

Rotax 125 senior MAX evo Bedienungsanleitung

Kohler

Kohler K361 Bedienungsanleitung

MTD

MTD OHV Series Bedienungsanleitung

Kohler

Kohler COMMAND CH18-745 Bedienungsanleitung

Mercury

Mercury D4.2L D-Tronic Bedienungsanleitung

Selve

Selve SE Plus-RC Series Bedienungsanleitung

Perkins

Perkins 1206E-E66TA Bedienungsanleitung

Skov

Skov DA 174 Handbuch

Rossi

Rossi TX11 Series Bedienungsanleitung

Siemens

Siemens SIMOTICS T-1FW3 Merkblatt

AL-KO

AL-KO PRO 350 Bedienungsanleitung

MTU

MTU 12 V 4000 Lx4 Bedienungsanleitung

Nanni

Nanni N3.30 Gebrauchsanweisung

Nanni

Nanni N5.160 CR2 Bedienungsanleitung

KSB

KSB SuPreme Series Montageanleitung

Hiwin

Hiwin EM1 Series Bedienungsanleitung

Rotax

Rotax 912 i series Betriebsanleitung

Siemens

Siemens SIMOTICS XP 1MB1 Bedienungsanleitung