Page 4SKU 07570 For technical questions, please call 1-800-444-3353.
18. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
19. Store idle tools out of reach of children and other untrained persons. Tools are
dangerous in the hands of untrained users.
20. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained
tools with a sharp cutting edge are less likely to bind and are easier to control. Do not
use a damaged tool. Tag damaged tools “Do not use” until repaired.
21. Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
22. Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Service
23. Motor service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
24. When servicing a tool, use only identical replacement parts. Follow instructions in
the
“Inspection, Maintenance, And Cleaning”
section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.
SPECIFIC SAFETY RULES FOR THIS PRODUCT
1. Maintain labels and nameplates on the Motor. These carry important information. If
unreadable or missing, contact Harbor FreightTools for a replacement.
2. Always wear ANSI approved safety impact eye goggles and heavy work gloves
when using or installing the Motor. Using personal safety devices reduce the risk for
injury.Safetyimpacteyegogglesandheavywork glovesareavailablefrom HarborFreight
Tools.
3. Maintain a safe working environment. Keep the work area well lit. Make sure there is
adequatesurroundingworkspace. Alwayskeeptheworkareafreeofobstructions,grease,
oil, trash, and other debris. Do not use a power tool in areas near flammable chemicals,
dusts, and vapors. Do not use this product in a damp or wet location.
4. Avoid unintentional starting. Makesureyou are prepared tobeginwork beforeturning
onthe Motor.
5. Do not force the Motor. This tool will do the work better and safer at the speed and
capacity for which it was designed.
6. Always unplug the Motor from its electrical outlet (or turn off the circuit breaker
and tag) before performing and inspection, maintenance, or cleaning procedures.
7. When installing motor, observe all national and local codes. Make sure to install,
protect, and fuse according to the latest issue of the National Electric Code, NEMA
Standard Publication No. MG2, and local codes. Ground frames in accordance with
NEC Article 430. For general grounding information, refer to NEC Article 250.
Brought to You by Augusta Flint
