Chicago Electric 67429 Installationshandbuch

12V LITHIUM-ION POWERED

CORDLESS ROTARY TOOL

67429

SET UP AND OPERATING INSTRUCTIONS

Distributed exclusively by Harbor Freight Tools®.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

contained herein may be reproduced in any shape or form without the express written consent of

Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein. Tools required for

assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Use with

Lithium-Ion Battery Pack (SKU 67120)

and

Lithium-Ion Battery Charger (SKU 67104)

(Both Sold Separately)

Page 2 For technical questions, please call 1-800-444-3353. SKU 67429

SAVE THIS MANUAL

Keep this manual for the safety

warnings and precautions, assembly,

operating, inspection, maintenance and

cleaning procedures. Write the product’s

serial number in the back of the manual

near the assembly diagram (or month

and year of purchase if product has no

number). Keep this manual and the

receipt in a safe and dry place for future

reference.

IMPORTANT SAFETY

INFORMATION

In this manual, on the labeling,

and all other information

provided with this product:

This is the safety alert

symbol. It is used to alert

you to potential personal

injury hazards. Obey all

safety messages that

follow this symbol to avoid

possible injury or death.

DANGER indicates

a hazardous

situation which, if not

avoided, will result in death or

serious injury.

WARNING

indicates a

hazardous situation which, if

not avoided, could result in

death or serious injury.

CAUTION, used

with the safety

alert symbol, indicates a

hazardous situation which, if

not avoided, could result in

minor or moderate injury.

NOTICE is used to

address practices

not related to personal injury.

CAUTION, without

the safety alert

symbol, is used to address

practices not related to

personal injury.

Lithium Battery Safety Warnings

LITHIUM BATTERIES STORE A

LARGE AMOUNT OF ENERGY

AND WILL VENT FIRE OR

EXPLODE IF MISTREATED:

Keep Battery Pack (SKU 67120)1.

dry.

DO NOT DO ANY OF THE2.

FOLLOWING TO THE BATTERY

PACK:

Open,a.

Drop,b.

Short-circuit,c.

Incinerate, ord.

Expose to temperatures greatere.

than 140°F.

Charge Battery Pack only according3.

to the instructions indicated in the

Battery Charger manual.

Inspect Battery Pack before4.

every use; do not use or charge if

damaged.

Page 3For technical questions, please call 1-800-444-3353.SKU 67429

General Safety Warnings

WARNING Read all safety

warnings and instructions.

Failure to follow the warnings and

instructions may result in electric

shock, re and/or serious injury.

Save all warnings and

instructions for future reference.

The term ″power tool″ in the

warnings refers to your battery-

operated (cordless) power tool.

Work area safety1.

Keep work area clean and wella.

lit. Cluttered or dark areas invite

accidents.

Do not operate power tools inb.

explosive atmospheres, such

as in the presence of ammable

liquids, gases or dust. Power tools

create sparks which may ignite the

dust or fumes.

Keep children and bystandersc.

away while operating a power

tool. Distractions can cause you to

lose control.

Electrical safety2.

Avoid body contact with groundeda.

surfaces such as pipes, radiators,

ranges and refrigerators. There is

an increased risk of electric shock if

your body is grounded.

Do not expose power tools to rainb.

or wet conditions. Water entering

a power tool will increase the risk of

electric shock.

Personal safety3.

Stay alert, watch what you area.

doing and use common sense

when operating a power tool. Do

not use a power tool while you

are tired or under the inuence

of drugs, alcohol or medication.

A moment of inattention while

operating power tools may result in

serious personal injury.

Use personal protectiveb.

equipment. Always wear ANSI-

approved eye protection. Safety

equipment such as dust mask,

non-skid safety shoes, hard hat,

or hearing protection used for

appropriate conditions will reduce

personal injuries.

Prevent unintentional starting.c.

Ensure the switch is in the off-

position before connecting to

power source and/or battery pack,

picking up or carrying the tool.

Carrying power tools with your nger

on the switch or energizing power

tools that have the switch on invites

accidents.

Do not overreach. Keep properd.

footing and balance at all times.

This enables better control of the

power tool in unexpected situations.

Dress properly. Do not weare.

loose clothing or jewelry. Keep

your hair, clothing and gloves

away from moving parts. Loose

clothes, jewelry or long hair can be

caught in moving parts.

Only use safety equipmentf.

that has been approved by an

appropriate standards agency.

Unapproved safety equipment may

not provide adequate protection.

Eye protection must be ANSI-

approved and breathing protection

must be NIOSH-approved for the

specic hazards in the work area.

Page 4 For technical questions, please call 1-800-444-3353. SKU 67429

Power tool use and care4.

Do not force the power tool. Usea.

the correct power tool for your

application. The correct power tool

will do the job better and safer at the

rate for which it was designed.

Do not use the power tool if theb.

switch does not turn it on and

off. Any power tool that cannot

be controlled with the switch is

dangerous and must be repaired.

Store idle power tools out ofc.

the reach of children and do not

allow persons unfamiliar with the

power tool or these instructions

to operate the power tool. Power

tools are dangerous in the hands of

untrained users.

Maintain power tools. Checkd.

for misalignment or binding of

moving parts, breakage of parts

and any other condition that may

affect the power tool’s operation.

If damaged, have the power

tool repaired before use. Many

accidents are caused by poorly

maintained power tools.

Keep cutting tools sharp ande.

clean. Properly maintained cutting

tools with sharp cutting edges are

less likely to bind and are easier to

control.

Use the power tool, accessoriesf.

and tool bits etc. in accordance

with these instructions, taking

into account the working

conditions and the work to be

performed. Use of the power tool

for operations different from those

intended could result in a hazardous

situation.

Service5.

Have your power tool serviced bya.

a qualied repair person using

only identical replacement parts.

This will ensure that the safety of the

power tool is maintained.

Specic Safety Warnings

Maintain labels and nameplates on1.

the tool. These carry important safety

information. If unreadable or missing,

contact Harbor Freight Tools for a

replacement.

Avoid unintentional starting. Prepare2.

to begin work before turning on the

tool.

Do not lay the tool down until it has3.

come to a complete stop. Moving

parts can grab the surface and pull

the tool out of your control.

Do not leave the tool unattended4.

when the Battery Pack (sold

separately) is attached. Turn off the

tool, and remove the Battery Pack

before leaving.

Read and adhere to the instruction5.

manual of the Battery Charger

(67104) (sold separately) for

important safety warnings and

instructions on how to properly

operate the Lithium Battery Charger.

Do not use this Rotary tool with any6.

other Battery or Charger.

CAUTION: Avoid accidental injury.7.

Keep hands and ngers safely away

from the bits (sold separately).

This product is not a toy. Keep it out8.

of reach of children.

Page 5For technical questions, please call 1-800-444-3353.SKU 67429

People with pacemakers should9.

consult their physician(s) before

use. Electromagnetic elds in close

proximity to heart pacemaker could

cause pacemaker interference or

pacemaker failure. In addition,

people with pacemakers should:

• Avoid operating alone.

• Do not use with power switch locked

on.

• Properly maintain and inspect to

avoid electrical shock.

WARNING: Some dust created by10.

power sanding, sawing, grinding,

drilling, and other construction

activities, contains chemicals

known [to the State of California] to

cause cancer, birth defects or other

reproductive harm. Some examples

of these chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and

cement or other masonry products

• Arsenic and chromium from

chemically treated lumber

Your risk from these exposures

varies, depending on how often you

do this type of work. To reduce your

exposure to these chemicals: work in

a well ventilated area, and work with

approved safety equipment, such as

those dust masks that are specially

designed to lter out microscopic

particles. (California Health & Safety

Code § 25249.5, et seq.)

The warnings, precautions,11.

and instructions discussed in

this instruction manual cannot

cover all possible conditions and

situations that may occur. It must

be understood by the operator that

common sense and caution are

factors which cannot be built into this

product, but must be supplied by the

operator.

Vibration Safety

This tool vibrates during use.

Repeated or long-term exposure to

vibration may cause temporary or

permanent physical injury, particularly

to the hands, arms and shoulders. To

reduce the risk of vibration-related

injury:

Anyone using vibrating tools regularly1.

or for an extended period should

rst be examined by a doctor and

then have regular medical check-

ups to ensure medical problems are

not being caused or worsened from

use. Pregnant women or people

who have impaired blood circulation

to the hand, past hand injuries,

nervous system disorders, diabetes,

or Raynaud’s Disease should not use

this tool. If you feel any symptoms

related to vibration (such as tingling,

numbness, and white or blue ngers),

seek medical advice as soon as

possible.

Do not smoke during use. Nicotine2.

reduces the blood supply to the

hands and ngers, increasing the risk

of vibration-related injury.

Wear suitable gloves to reduce the3.

vibration effects on the user.

Use tools with the lowest vibration4.

when there is a choice.

Include vibration-free periods each5.

day of work.

Grip tool as lightly as possible (while6.

still keeping safe control of it). Let

the tool do the work.

Page 6 For technical questions, please call 1-800-444-3353. SKU 67429

To reduce vibration, maintain the tool7.

as explained in this manual. If any

abnormal vibration occurs, stop use

immediately.

Extension Cords

Note: Extension cords must not be used

with this item’s charger.

SAVE THESE

INSTRUCTIONS.

SPECIFICATIONS

Power

Requirement 12 V Li-Ion Battery Pack

No Load RPM 5000 ~ 25,000 RPM, variable

Collet Size 1/8”

Power Settings 0 (Off), 1 (slowest speed) to 6

(highest speed)

Accessories

(sold separately)

Battery Pack (SKU 67120)

Battery Charger (SKU 67104)

UNPACKING

When unpacking, make sure that the

item is intact and undamaged. If any parts

are missing or broken, please call Harbor

Freight Tools at 1-800-444-3353 as soon

as possible.

OPERATING INSTRUCTIONS

Read the ENTIRE IMPORTANT

SAFETY INFORMATION

section at the beginning of this

manual including all text under

subheadings therein before set

up or use of this product.

Components

Figure 1 Collet (2)

Power Dial (12)

Spindle Lock Button (7)

Insert

Battery

Pack

here

Chuck (1)

Page 7For technical questions, please call 1-800-444-3353.SKU 67429

Tool Set Up - Adding Bits

Note: Only use accessories that are rated

at or above the 25,000 RPM rating of

the Rotary Tool.

WARNING: Always allow the motor to

come to a complete stop before

engaging the Spindle Lock Button (7).

WARNING: Always remove the Battery

Pack before making any adjustments

or changing bits, to prevent

accidental starting of the tool.

WARNING: If you are changing a bit

immediately after use, be careful not

to touch the bit. It may be very hot

from use. Allow the bit to cool before

handling.

Depress the Spindle Lock Button1.

(7) and rotate the Chuck (1) until the

shaft is engaged by the lock.

Loosen the Chuck by turning it2.

counterclockwise to open the Chuck.

Slide the bit out of the Collet, or insert3.

new bit fully into the Collet.

While still pressing down on the4.

Spindle Lock Button (7), tighten the

Chuck by turning it clockwise.

WARNING: Be sure the Chuck is securely

tightened before turning on the tool.

Bits may be ejected from a tool if the

Chuck is loose, potentially causing

severe personal or property damage.

General Operating Instructions

Designate a work area that is clean1.

and well-lit. The work area must not

allow access by children or pets to

prevent injury and distraction.

Keep ammables away from 2.

immediate work area. Sparks

generated from grinding/polishing

ignite ammables.

Before installing the Battery Pack,3.

check that the Power Dial (12) is in

the Off (zero) position and that the

accessory is secured in the Chuck.

Note: Only turn the Chuck

counterclockwise to prevent

loosening the bit.

Once the Battery Pack is fully4.

charged, align the anges and slide

it into the back of the housing until it

snaps in securely in place.

Rotate the Power Dial to the left to5.

the desired rotation speed to activate.

Note: This is a variable speed switch.

The tool bit speed is dependent on

the position of the Switch. Use a

speed appropriate to the bit and the

material being worked on. In general

harder materials require faster

speeds and softer materials require

slower speeds. Relative speeds are

indicated by the numbers on the

Switch.

Apply the tool bit to the work material6.

as needed.

Do not apply excessive pressure on7.

the tool. Allow the tool to do the work.

When nished, rotate the Power Dial 8.

to off.

Page 8 For technical questions, please call 1-800-444-3353. SKU 67429

Remove the Battery Pack, allow time9.

for it to cool, and then place in the

Charger, making sure the Charger

is out of reach of children. Remove

the Bit, then store the tool and

accessories indoors out of children’s

reach.

MAINTENANCE AND

SERVICING

Procedures not specically

explained in this manual

must be performed only by a

qualied technician.

TO PREVENT

SERIOUS INJURY

FROM ACCIDENTAL

OPERATION:

Turn the Power Dial of the tool

off and remove the Battery

Pack before performing any

inspection, maintenance, or

cleaning procedures.

TO PREVENT SERIOUS

INJURY FROM TOOL

FAILURE:

Do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

Cleaning, Maintenance, and

Lubrication

BEFORE EACH USE,1. inspect the

general condition of the tool. Check

for loose hardware, misalignment or

binding of moving parts, cracked or

broken parts, and any other condition

that may affect its safe operation.

AFTER USE,2. wipe external surfaces

of the tool with a clean cloth.

Note: Keep Collar (3) securely in place

at all times. There are no lubricating

point inside the Collar.

WARNING! Do not use if either

the Battery Pack or Charger are

damaged in any way.

BATTERY MUST BE RECYCLED OR

DISPOSED OF PROPERLY. Do not

short, incinerate or open battery.

Page 9For technical questions, please call 1-800-444-3353.SKU 67429

Troubleshooting

Problem Possible Causes Likely Solutions

Tool will not start. Battery Pack not properly seated.1.

Battery Pack needs charging2.

Connection to Battery pack3.

damaged.

Damaged / Bad Battery.4.

Check that Battery Pack is fully inserted1.

into tool so that it snaps into place.

Charge Battery Pack.2.

Check that the terminals inside the tool3.

are not bent or missing. Have repaired by

a qualied technician if needed.

Replace Battery Pack.4.

Tool operates slowly. Battery Pack needs charging.1.

Applying excessive pressure on2.

the bit.

Charge Battery Pack.1.

Reduce pressure on the bit.2.

Performance

decreases over time.

Accessories dull or damaged.1.

Carbon brushes worn or2.

damaged.

Keep cutting accessories sharp.1.

Replace as needed.

Have qualied technician replace 2.

brushes.

Excessive noise or

rattling.

Internal damage or wear.1.

(Carbon brushes or bearings, for

example.)

Damaged Spindle.2.

Have technician service tool.1.

Have technician service tool.2.

Overheating. Forcing tool to work too fast.1.

Blocked motor housing vents.2.

Allow tool to work at its own rate.1.

Wear ANSI-approved safety goggles and2.

NIOSH-approved dust mask/respirator

while blowing dust out of motor using

compressed air.

Follow all safety precautions whenever diagnosing or servicing the

tool. Disconnect power supply before service.

Page 10 For technical questions, please call 1-800-444-3353. SKU 67429

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR

DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT

HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS

QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/

OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD

BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE

BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER

INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not

available individually as replacement parts.

Inhaltsverzeichnis

Andere Chicago Electric Elektrowerkzeuge Handbücher

Chicago Electric

Chicago Electric 33710 Kurzanleitung

Chicago Electric

Chicago Electric 66301 Montageanleitung

Chicago Electric

Chicago Electric 91618 Bedienungsanleitung

Chicago Electric

Chicago Electric 61423 Bedienungsanleitung

Chicago Electric

Chicago Electric 35 LB Original Bedienungsanleitung

Chicago Electric

Chicago Electric 68012 Bedienungsanleitung

Chicago Electric

Chicago Electric Chicago Electric Power Tools 1600W Heavy Duty Heat... Montageanleitung

Chicago Electric

Chicago Electric 40039 Bedienungsanleitung

Chicago Electric

Chicago Electric 68199 Bedienungsanleitung

Chicago Electric

Chicago Electric 62397 Bedienungsanleitung

Chicago Electric

Chicago Electric 66098 Installationshandbuch

Chicago Electric

Chicago Electric 61737 Montageanleitung

Chicago Electric

Chicago Electric 42831 Bedienungsanleitung

Chicago Electric

Chicago Electric 66182 Installationshandbuch

Chicago Electric

Chicago Electric 68221 Montageanleitung

Chicago Electric

Chicago Electric 67845 Installationshandbuch

Chicago Electric

Chicago Electric 68821 Bedienungsanleitung

Chicago Electric

Chicago Electric 47937 Bedienungsanleitung

Chicago Electric

Chicago Electric 68848 Bedienungsanleitung

Chicago Electric

Chicago Electric 95380 Installationshandbuch

Chicago Electric

Chicago Electric 60713 Original Bedienungsanleitung

Chicago Electric

Chicago Electric 93213 Installationshandbuch

Chicago Electric

Chicago Electric 67632 Installationshandbuch

Chicago Electric

Chicago Electric 38437 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch