Chicago Pneumatic CP86500 Bedienungsanleitung

CP86300 / CP86500 / CP86750 / CP86100 - Instructions for lifting and lowering the table

www.cp.com

SAFETY INSTRUCTIONS

• Never exceed the rated capacity of the press.

• Keep unauthorised persons, particularly children, away from the work area.

• Do not introduce hands or any other part of the body in the work area.

• Always use ocular and facial protection.

• Never wear baggy clothes, ties, watches, rings, chains, etc. when using the

press.

• Long hair should be tied up.

• Prior to use, make sure the press is securely anchored.

• Use appropriate guarding to contain any pieces that may break or fly apart

when applying force.

• Use only press accessories having a capacity rating equal to or greater than

the capacity of the press.

• Verify lift cables are slack before pressing on the bolster.

• Avoid off-center loads.

• The V-blocks must be used in pair, not by piece!

• Only one person at a time should operate the press.

• The operator must wear protective cloth, gloves, safety helmet, shoes and

ear protector during operating.

• To avoid accidents, always be aware of any on-going work on the machine.

Also, always stay focused on the job to be done.

Page 1/2

WARNING

Lower lock pins

Table

Upper lock pins

Winch

Cable

Safety

8940174875 Rev.02 - 02/2017

CP86300 / CP86500 / CP86750 / CP86100 - Instructions for lifting and lowering the table

www.cp.com

Page 2/2

Lifting the table

•

WARNING

While lifting the table, the 2

lower lock pins must remain in position.

1. Remove the upper lock pins.

2. Lift the table using the winch and adjust the height of the

table to allow the positionning of the lock pins in the holes.

3. Insert the upper lock pins with the safety pins.

4. Remove and Insert the lower lock pins to a new position.

Insert the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

Lowering the table

1. Remove and insert the 2 lower lock pins to a new

postion.

WARNING

While lowering the table, the 2

lower lock pins must remain in lock position.

2. Apply tension on the table using the winch and remove

the upper lock pins.

3. Lower the table using the winch and adjust the height

of the table to allow the positionning of the lock pins.

4. Insert the upper lock pins with the safety pins.

5. Always operate the winch in order to release tension

of the cables.

Caution

When using the press,

The cables must always be loose. The cables

must not carry any load.

INSTRUCTIONS FOR MOVING THE TABLE

Caution

Never lower or lift the table with a load, the table must be free of load.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Chicago Pneumatic Elektrowerkzeuge Handbücher

Chicago Pneumatic

Chicago Pneumatic CP8848-2 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP871C Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP873C-HD Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP3109-13AC Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP 4131 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic RX 2 Wartungs- und Serviceanleitung

Chicago Pneumatic

Chicago Pneumatic CP772H Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP825C Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP611 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP7748 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP826 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic Quiet CP7830Q Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic RediPower RP9426 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP86150 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP86150 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP825 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP7778 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP5000 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic MS 690 Wartungs- und Serviceanleitung

Chicago Pneumatic

Chicago Pneumatic CP6500 series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP828 Series Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP86150 Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic B20L Bedienungsanleitung

Chicago Pneumatic

Chicago Pneumatic CP826 Bedienungsanleitung

Beliebte Elektrowerkzeuge Handbücher anderer Marken

AEG

AEG OMNI-JS Bedienungsanleitung

SIP

SIP 01533 Bedienungsanleitung

Ribimex

Ribimex PRS499 Bedienungsanleitung

3M Fiber Optic Connector Crimp Tool Bedienungsanleitung

Ryobi

Ryobi P524 Bedienungsanleitung

ROJEK

ROJEK FSN 300A Bedienungsanleitung

Kemper

Kemper 1740PRO Bedienungsanleitung

WABCO

WABCO OptiTire Bedienungsanleitung

EINHELL

EINHELL TE-MS 18/210 Li Bedienungsanleitung

Orgapack

Orgapack OR-T 85 Kurzanleitung

TOUGHCUT

TOUGHCUT Diamond 400 Bedienungsanleitung

Yaros

Yaros PB-3603 Bedienungsanleitung

Fein

Fein BSS 2.0 E Einrichtungshandbuch

Baileigh Industrial

Baileigh Industrial SS-2725 Bedienungsanleitung

Milwaukee

Milwaukee 2674-20 Bedienungsanleitung

Fein

Fein BLs 1.6 Bedienungsanleitung

Princess

Princess Electric Multi Sharpener Bedienungsanleitung

FOREDOM

FOREDOM K.1050 Handbuch