Chieftec CEB-2355S Bedienungsanleitung
1
**Please read this manual carefully before you use the product**
Description：
The CEB-2355S is a multifunction storage device designed in a special
body structure, which can be simply connected to the PC by either
USB2.0 or eSATA. It supports 2 SATA HDDs with entirely screw free
patent design for easy installation and is additionally equipped with ball
bearing fans to keep the HDDs cool !!
MODE:
zDual Mode: 2 HDDs appear on your computer and can be used
/ accessed simultaneously
zJBOD Mode: Your computer displays 1 HDD with the capacity
of two HDDs combined
zRaid 0 Mode**: This mode involves no redundancy and splits
the files equally into each HDD. The advantage of this mode is
the data transfer speed, but the disadvantage is data might be
damaged if one of the HDDs is defect.
zRaid 1 Mode** (mirroring): One HDD has its data duplicated
on another HDD. If either drive fails, the other continues to
function as a single drive and thus provides full redundancy.
zSAFE50 Mode*：½ (50%) of the HDD volume is used for
mirroring and the rest is used for Raid 0.
zSAFE33 Mode*：1/3 (33%) of the HDD volume is used for
mirroring and the rest is used for Raid 0.
* The SAFE33 & SAFE50 modes only perform when your motherboard
/ PCI card contains Silicon IC
** Some WD (Western Digital) Desktop Edition HDDs do not support
the RAID function. Please check the website below for more
information.
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php
?p_faqid=1397&p_created=1131638613&p_sid=PV5Aepsj&p_acce
ssibility
2
FEATURES:
1. Entirely screw-free patent design for easy installation
2. Aluminum and unique casing with ball bearing fan to provide best
possible heat dissipation
3. Support 2.5” & 3.5” SATA HDD.
4. Support 6 modes: Dual / JBOD / RAID 0 / RAID 1 / SAFE33 /
SAFE50.
5. Plug and Play / Hot Swapping.
6. OS support Windows 2000 / XP / Vista/ Windows7 / Mac OS 10.4.8
above/ Linux.
SPECIFICATIONS
Material Aluminum
HDD Type 3.5" and 2.5" SATA Ⅰ/ⅡHDD
Interface & Transfer
Rate
USB2.0 up to 480 Mbps
eSATA up to 3.0 Gbps
System
Requirements
Windows 2000 / XP / Vista /WIindows7 /
Mac 10.4.8+/Linux
RAID Modes Dual/JBOD/RAID0/RAID1/SAFE33/SAFE50
LED
-Green for Power
-Blue for Access、HDD1 and HDD2
-Red for Error
Dimension 165 x 116 x 197 mm (L x W x H)
Power AC Input：100 ~ 240V, DC Output：12V 3A.
3
SYSTEM REQUIREMENTS:
Intel Pentium-Ⅱ500MHz, 64MB RAM
Windows 2000/XP/Vista/windows 7or Mac OS 10.4.8
above/Linux
250 MB of free disk space
eSATA Connection：SteelVine Host Bus Adapter card and
associated software drivers, or any other SATA Host Card
with Port Multiplier support.
USB Connection：USB 1.1 or 2.0 direct host connection
or USB Hub.
Strongly recommended to use Intel Pentium 4
systems or higher
PACKAGE CONTENT:
USB 2.0 + eSATA
Item Quantity
Dual HDD enclosure 1 PC
Installation Guide / Manual 1 PC
eSATA cable 1 PC
USB cable 1 PC
PCI bracket for eSATA 1 PC
Adapter (12V/3A) 1 PC
RB 4PCS
4
PANEL DESCRIPTION:
Front Panel
1、Power LED: Lights up when the product is turning on
2、Access LED: Blinks while transferring data
3、HDD1: LED light on indicates successful connection of HDD1
4、HDD2: LED light on indicates successful connection of HDD2
5、Error LED: When Error LED turns on, please check the product
settings, software or HDD status
Back Panel
1、eSATA Interface
2、USB2.0 Interface
3、DC-(JACK) Connection: Adapter OUTPUT (DC 12V)
4、Reset button: Please press the reset button after selecting the mode.
5、Mode selection switch: Select your preferred mode and see under
“MODE SELECTION” for further instruction
6、Power ON/OFF switch.
5
INSTALLATION GUIDE:
1. Press the side button to open the cover
2. Plug-in the HDDs and ensure that everything is well connected
3. Close the cover.
6
4. Connect the DC adapter (into) with the enclosure and the socket.
5. Plug USB or eSATA cable into the enclosure and PC.(USB &
eSATA interface can not be used at the same time)
7
6. Select your mode. (The SAFE33 & SAFE50 modes are only
available with motherboards/PCI cards that contain Silicon IC)
** Please see “MODE SELECTION for further details **
7. Please wait 1~2 minutes when CEB-2355S is connected to the PC
for the first time. (Recognition time varies with different OS)
8. Installation of 2.5 HDDs
9. Plug the HDDs into the enclosure and ensure everything is well
connected. For more stabilization insert the EVA
MODE SELECTION:
Please select your desired mode by following the illustration below and
press “Reset”once the mode is selected.
8
MODE SWITCH MODE SWITCH
DUAL
JBOD
RAID 0
RAID 1
SAFE 33
SAFE 50
Attention：
1、The RESET button will not work when button no. 4 is pressed
down. Therefore select your desired mode first before you press
down button no. 4 to prevent an error function
2、Please follow the illustrations and select your desired mode by
adjusting the switch. Press “RESET once the mode is selected.
4 3 2 1
43 2 1
4321
4321
4321
4321
4321
9
3、For certain mode change, you will be requested to reformat your
HDDs. For example, if you switch from JBOD to DUAL mode.
4、If you select Raid 0 mode, it is necessary to format the hard drive
before using it.
5、If you select Raid 1 mode, the HDDs need to be formatted (in
Dual Mode) first and switch it to Raid 1 mode. If you would like to
see the mirroring HDD, you need to switch it to Dual Mode to see
it.
6、When you use the eSATA connection, if your motherboard does
not either contain Silicon Image IC controller or have the port
multiplier function, it is very important to know that there is only
JBOD mode can be used.
7、If you would like to switch from Raid 0/Raid 1/Safe 33/Safe 50 to
the other mode, please make sure to remove the old partition first
and create a new partition after resetting a new mode. (Right-click
the My Computer icon Æselect Manage Æselect Disk
Management under Storage)
8、If the HDD does not react after changing the mode, please
initialize and format it before doing the partition
9、Under Windows XP 32 OS, the maximum total capacity of 2
HDDs is 3TB. If the capacity exceeds this limit, the HDDs will not
function. (Please check the official Windows website for detailed
information)
Partitioning Volumes
MS Windows
Important: Before reconfiguring a volume, back up your
data.
1. Right-click the My Computer icon on your desktop and
Inhaltsverzeichnis
Andere Chieftec Lagerung Handbücher
Beliebte Lagerung Handbücher anderer Marken
Spectra Logic
Spectra Logic T-Series Spectra T50e Bedienungsanleitung
Panasonic
Panasonic LKM-F931-1 Bedienungsanleitung
Tabernus
Tabernus Enterprise Erase E2400 Bedienungsanleitung
Rocstor
Rocstor COMMANDER 3F series Bedienungsanleitung
HP
HP P9000 Bedienungsanleitung
Western Digital
Western Digital Ultrastar Data60 Bedienungsanleitung