Chima STCS4012 Series Bedienungsanleitung
STCS4012 Series Layer 3 Switch Installation Guide
陈泽科技有限公司
www.stephen-tele.com
STCS4012 Series Routing Switches
Installtion Guide Manual
ER:1.0.0
STEPHEN TECHNOLOGIES CO.,LIMITED
ALL RIGHTS RESER ED
STCS4012 Series Layer 3 Switch Installation Guide
陈泽科技有限公司
www.stephen-tele.com
About This Manual
Release Notes
This manual applies to STCS4012 Series Routing Switches.
Related Manuals
The related manuals are listed in the following table.
《STCS4012 Series Routing Switches Installation Guide Manu》
《STCS4012 Series Routing Switches Configuration Guide Manu》
Intended Audience
The manual is intended for the following readers:
Network engineers
Network administrators
Customers who are familiar with network fundamentals
Conventions
The manual uses the following conventions:
I. General conventions
Convention Description
Arial Normal paragraphs are in Arial.
Arial Narrow Warnings, Cautions, Notes and Tips are in Arial Narrow.
Boldface Headings are in Boldface.
Courier New Terminal Display is in Courier New.
II. Command conventions
Convention
Description
Boldface
The keywords of a command line are in Boldface.
italic
Command arguments are in italic.
STCS4012 Series Layer 3 Switch Installation Guide
陈泽科技有限公司
www.stephen-tele.com
[ ]
Items (keywords or arguments) in square brackets [ ] are optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by vertical bars. One is
selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets and separated by
vertical bars. One or none is selected.
III. GUI conventions
Convention
Description
< >
Button names are inside angle brackets. For example, click the <OK> button.
[ ]
Window names, menu items, data table and field names are inside square
brackets. For example, pop up the [New User] window.
/
Multi-level menus are separated by forward slashes. For example,
[File/Create/Folder].
I . Keyboard operation
Format
Description
<Key>
Press the key with the key name inside angle brackets. For example, <Enter>,
<Tab>, <Backspace>, or <A>.
<Key1+Key2>
Press the keys concurrently. For example, <Ctrl+Alt+A>
means the three keys should be pressed concurrently.
<Key1, Key2>
Press the keys in turn. For example, <Alt, A> means the two
keys should be pressed in turn.
. Mouse operation
Action
Description
Click
Press the left button or right button quickly (left button bydefault).
Double Click
Press the left button twice continuously and quickly.
Drag
Press and hold the left button and drag it to a certain position.
I. Symbols
STCS4012 Series Layer 3 Switch Installation Guide
陈泽科技有限公司
www.stephen-tele.com
Eye-catching symbols are also used in the manual to highlight the points worthy of
special attention during the operation. They are defined as follows:
֠
֠֠
֠Caution: Means reader be extremely careful during the operation.
Note: Means a complementary description.
STCS4012 Series Layer 3 Switch Installation Guide
陈泽科技有限公司
www.stephen-tele.com
Chapter 1 Overview .......................................................................................................................- 1 -
1.1 Brief Introduction ............................................................................................................- 1 -
1.1.1 Hardware Architecture .........................................................................................- 1 -
1.1.2 Services ................................................................................................................- 1 -
1.2 Typical Application ..........................................................................................................- 1 -
1.2.1 Networking of Residential Area for Broadband Ethernet Access .........................- 1 -
1.2.2 Networking of Medium/Small Enterprise or Large Enterprise Branch .................- 2 -
1.2.3 Networking of Large Enterprise and Campus .......................................................- 2 -
Chapter 2 Specifications and Features ..........................................................................................- 2 -
2.1 Front Panel ......................................................................................................................- 2 -
2.1.1 STCS4012S Front Panel .........................................................................................- 2 -
2.1.2 STCS4012ST Front Panel .......................................................................................- 3 -
2.1.3 STCS4012TF Front Panel .......................................................................................- 4 -
2.1.4 Console Port .........................................................................................................- 5 -
2.1.5 AUX Port ...............................................................................................................- 5 -
2.2 Rear Panel .......................................................................................................................- 5 -
2.3 Switch Performance ........................................................................................................- 5 -
Chapter 3 Installation Preparation ................................................................................................- 7 -
3.1 Precautions......................................................................................................................- 7 -
3.2 Requirements on Environment .......................................................................................- 7 -
3.2.1 Temperature/Humidity Requirements .................................................................- 8 -
3.2.2 Laser Safety ..........................................................................................................- 8 -
3.3 Installation Tools .............................................................................................................- 8 -
Chapter 4 Installation ....................................................................................................................- 9 -
4.1 Hardware Installation ......................................................................................................- 9 -
4.1.1 Installing the Switch in 19-inch Standard Cabinet ................................................- 9 -
4.1.2 Installing the switch on the Workbench ...............................................................- 9 -
4.2 Connecting Power Cord ...................................................................................................- 9 -
4.3 Connecting Console Cable ............................................................................................ - 10 -
4.4 Connecting AUX Cable .................................................................................................. - 11 -
4.5 Post-installation Checklist ............................................................................................ - 11 -
Chapter 5 Booting and Configuration ........................................................................................ - 11 -
5.1 Setting up the Configuration Environment .................................................................. - 11 -
5.2 Connecting the Console Cable ..................................................................................... - 11 -
5.3 Setting Parameters of the Terminal .............................................................................. - 11 -
5.4 Booting Switch ............................................................................................................. - 14 -
5.4.1 Checking before Powered on ............................................................................ - 14 -
5.4.2 Powering on and Booting .................................................................................. - 14 -
STCS4012 Series Layer 3 Switch Installation Guide
- - 1 - -
www.stephen-tele.com
Chapter 1 Overview
1.1 Brief Introduction
STCS4012 series Ethernet Switches are type of box-shaped L2/L3 wire speed Ethernet Switches, applied on the convergence
layer of the medium- and small-sized enterprise networks, IP Metropolitan Area Network (MAN) and Ethernet residential areas.
1.1.1 Hardware Architecture
STCS4012 Series Routing Switches
Configurations include:
STCS4012S:12 SFP ports
STCS4012ST:8 SFP ports and 4 Ethernet 10/100/1000 ports
STCS4012TF:12 Ethernet 10/100/1000 ports and 4 SFP
combo ports
1.1.2 Services
Based on the SPROS Network OS, over which CHIMA has the independent intelligent property, STCS4012 Series Routing Switches
can provide various routing protocols, LAN management, traffic control and Qos guarantee etc., and it also provides perfect
service control and user management function.
STCS4012 Series Routing Switches support online upgrade through various approaches such as FTP/TFTP. It also supports local
configuration and remote configuration.
1.2 Typical Application
STCS4012 Series Routing Switches can be used flexibly in different networking environment such as access to enterprise network
and broadband network. The following sections introduce some typical application cases of it.
1.2.1 Networking of Residential Area for Broadband Ethernet Access
In the networking of residential area with broadband Ethernet access, STCS4012 Series Routing Switches are located in the
STCS4012 Series Layer 3 Switch Installation Guide
- - 2 - -
www.stephen-tele.com
residential area center. It connects to Ethernet users via the L2 switches such as SPEED S2026 Switch. Its Uplink is connected to
the core L3 switch through the GE extended module and thus connected to the MAN backbone.
1.2.2 Networking of Medium/Small Enterprise or Large Enterprise Branch
In the medium/small enterprises or the branches of large enterprises, STCS4012 Series Routing Switches can serve as the
backbone switch, which is connected to the head office or other branches through the router. As the enterprise or organization
scale grows, STCS4012 Series Routing Switches can provide the larger scale backbone by cascade.
1.2.3 Networking of Large Enterprise and Campus
In large-scale enterprise networks and campus networks, STCS4012 Series Routing Switches are located on the convergence layer
and connected to several L2 Ethernet switches such as SPEED S2026 Switch on the downlink and the backbone GE switch via the
GE extended port on the uplink. In this way, STCS4012 Series Routing Switches provide a complete enterprise networking
solution, which provides 1000M bandwidth to backbone and 100M bandwidth to desktop users.
Chapter 2 Specifications and Features
2.1 Front Panel
2.1.1 STCS4012S Front Panel
There are 12 pairs of Link/ACT led indicators, 12 SFP ports, a Console port in sequence, 1 AUX port, 1 system led indicator, 1
Power led indicator, 1 pair of AUX Link/ACT led indicators in the front panel.
The table below describes the indicators on the front panel of STCS4012S Ethernet Switch
Table 2-1 Front panel indicators
Indicator Sign State Meaning
Power indicator
PWR
On The switch is powered on.
Off The switch is powered off.
System status indicator STATUS
Off The switch is powered off
Blinking System work nomal
AUX interface indicator Active (Green) Off No data is being transmitted or
STCS4012 Series Layer 3 Switch Installation Guide
- - 3 - -
www.stephen-tele.com
received.
Blinking
Data is being transmitted or
received.
Link (Green)
On Normal connection.
Off No connection
interface indicator
Active
(Green/Orange)
Off
No data is being transmitted or
received.
Blinking
Data is being transmitted or
received
Link (Green)
On Normal connection.
Off No connection.
2.1.2 STCS4012ST Front Panel
There are 12 pairs of Link/ACT led indicators, 8 SFP ports and 4 Ethernet 10/100/1000 ports, a Console port in sequence, 1 AUX
port, 1 system led indicator, 1 Power led indicator, 1 pair of AUX Link/ACT led indicators in the front panel.
The table below describes the indicators on the front panel of STCS4012ST Ethernet Switch
Table 2-2 Front panel indicators
Indicator Sign State Meaning
Power indicator
PWR
On The switch is powered on.
Off The switch is powered off.
System status indicator STATUS
Off The switch is powered off
Blinking System work nomal
AUX interface indicator
Active (Green)
Off
No data is being transmitted or
received.
Blinking
Data is being transmitted or
received.
Link (Green)
On Normal connection.
Off No connection
interface indicator
Active
(Green/Orange)
Off
No data is being transmitted or
received.
STCS4012 Series Layer 3 Switch Installation Guide
- - 4 - -
www.stephen-tele.com
Blinking
Data is being transmitted or
received.
Link (Green)
On Normal connection.
Off No connection.
2.1.3 STCS4012TF Front Panel
There are 12 pairs of Link/ACT led indicators, 12 Ethernet 10/100/1000 ports and 4 SFP
combo ports, a Console port in sequence,
1 AUX port, 1 system led indicator, 1 Power led indicator, 1 pair of AUX Link/ACT led indicators in the front panel.
The table below describes the indicators on the front panel of STCS4012TF Ethernet Switch
Table 2-3 Front panel indicators
Indicator Sign State Meaning
Power indicator
PWR
On The switch is powered on.
Off The switch is powered off.
System status indicator STATUS
Off The switch is powered off
Blinking System work nomal
AUX interface indicator
Active (Green)
Off
No data is being transmitted or
received.
Blinking
Data is being transmitted or
received.
Link (Green)
On Normal connection.
Off No connection
interface indicator
Active
(Green/Orange)
Off
No data is being transmitted or
received.
Blinking
Data is being transmitted or
received.
Link (Green)
On Normal connection.
Off No connection.
STCS4012 Series Layer 3 Switch Installation Guide
- - 5 - -
www.stephen-tele.com
2.1.4 Console Port
The Console port complies with the EIA/TIA-232 asynchronous serial criterion. ia this port, Users can perform configuration
locally or remotely.
Table 2-4 Console port attributes
Attribute Description
Connector type RJ-45
Interface complying with Asynchronous EIA/TIA-232
Baud rate 9600bps ( by default)
Supported services
Connection with the character terminal
Connection with the local or remote PC serial port (through a pair of
Modems when connected remotely) and the execution of terminal
simulator on PC.
2.1.5 AUX Port
The AUX port is an assistant management port . ia this port, Users can perform configuration locally or remotely trough telnet
or web management.
2.2 Rear Panel
On the rear panel of switch there are a AC power input socket and the power switch .
2.3 Switch Performance
Table 2-5 STCS4012 Series Routing Switches Specification and Performance
Feature STCS4012S STCS4012ST STCS4012TF
Port Configuration 12 ports 1000M
SFP interfaces
8 ports 1000M SFP
interfaces,4 ports
10/100/1000 Base-T
12 ports 10/100/1000 Base-T,4
ports 1000M SFP combo
interfaces
Switching Capacity 24G
Packet Forward Capability 17.8Mpps
Inhaltsverzeichnis
Andere Chima Schalten Handbücher
