Chino MR9504 Bedienungsanleitung

INST NO.MR-45A

INSTRUCTION MANUAL

CARD LOGGER DATA READOUT UNIT&

DATAANALYSIS SOFTWARE FOR WINDOWS

MR9504 USERS GUIDE

Always keep this instruction manual carefully in a safe

place near this product where all concerned

personnel can refer to it immediately

Introduction ··························································································3

Before starting up the program ··························································3

Program

Cautions on program

Safety Precautions ··············································································4

Operating environment and system requirements···························6

Name of each part ················································································6

Installing the Software ·········································································7

Procedure of installation

Uninstalling the Software ··································································12

Procedure of uninstalling

System configuration and start ·························································14

Connection of data readout unit and Card Logger

Starting up the Software

1. Composition of screen (p16)

2. Basic operation (p17)

2-1. Menu ································································································17

2-2. Selection and execution of menu ·······························································17

2-3. Tool button ·························································································17

2-4. Operation in a box ················································································18

3. Logger (p19)

3-1. Reading out data from your Card Logger ·····················································19

3-2. Programming your Card Logger

1. Logger Settings ············································································20

2. Parameter Settings········································································22

3-3. Setting a serial port

1. Auto Setting ···············································································23

2.Manual Settings ············································································23

3-4. Usual Communication

1. Execute [Usual Communication] ························································24

2. [Usual Communication] Settings ························································25

Topic:Communications mode of your Card Logger ···················································25

4. Graph (p26)

4-1. Displaying a graph ···············································································26

4-2. Graph Menu

1. Programming scales of a graph ·······················································27

2. Print 2-1.Printing a graph ····························································28

INTRODUCTION

CONTENTS

2-2. Page Setup ·································································28

2-3. Printer Setup ·······························································29

3. Parameter

3-1. Label·········································································29

3-2. Line Width···································································29

3-3. Base Line ···································································30

4. Exiting from the graph menu ·····························································30

5. File (p31)

5-1. Reading out data from a file ·····································································31

5-2. Saving data in a file (Rewrite) ··································································31

5-3. Saving data in a file ··············································································32

5-4. Saving data in text form ········································································32

5-5. Print

1. Printing out all data ·······································································33

2. Printing out a part of data ······························································34

3. Printing out parameters ··································································34

4. Setting up a printer ······································································34

5-6. Inserting single data ·············································································35

5-7. Quitting the program ·············································································35

6. Channel (p36)

7. Help (p37)

7-1. Analysis Software Help ··········································································37

7-2. Version information ·············································································37

8. Troubleshooting (p38)

9. Specifications (p39)

Thank you for your purchasing of this MR9504 Data Readout Units.

Introduction

This instructions manual is the software for data analysis for utilizing effectively the data,

which connected data reading unit MR9504 with Card Logger MR Series, and was

recorded by Card Logger. It is creating on the assumption that it is used with the

personal computer which operates under Windows®XP, Windows Vista®, 7, or the

environment of 8. Please refer to the manual of Card Logger for the matter that relates to

the main body of Card Logger.

Before starting up the program

This clause has notes to use software and the main bodies of Card Logger and

necessary preparations have been described. Be sure to read before using it.

Please keep this book importantly after it reads.

Program

When unpacking this product, carefully check the package contents. If any package

contents are missing, contact your local sales representative or sales office

[ The program is consisted of ]

Instruction manual (this manual)

Software CD-ROM

Data readout unit

Cautions on program

Handling Precautions

When this unit is used in the following conditions or environment, please pay attention to

use it by keeping on the safe side of ratings and functions, or to safety measures like

failsafe, and also please consult our sales engineer.

1.Usage in a condition or environment not described in this instruction manual.

2.Usage in nuclear control, railroad, aviation, vehicle, combustion equipment,

medical equipment, amenity equipment, safety equipment, etc.

3.Usage in applications that big influence to human life or properties is estimated and safety

is especially requested.

Safety Precautions

Cautions stated in this manual indicate important contents about operational safety. Therefore,

carefully read the contents and strictly follow the instructions.

In this instruction manual, the following warning labels are provided to indicate possible hazards and

ensure operational safety.

WARNING

This denotes hazards which COULD result in death or severe

personal injury, if not avoided.

CAUTION

This denotes hazards which COULD result in minor personal

injury and/or product or property damage, if not avoided.

[ Safety precautions ]

WARNING

Do not use this unit for measurement other than the specified.

CAUTION

Never attempt to disassemble or modify this unit.

Do not flaw or put dirt on the data reading window.

Do not operate or store this unit in a place where it is exposed to the high temperature.

Additionally, do not leave this unit in a place where the high temperature continues for an

extended period of time, such as inside of a car. Otherwise, the discoloration may occur on

the unit.

Please do not put Card Logger on the main body with getting wet.

Please do not use it in the following environment.

The place which receives heat from heating apparatus directly.

A place with a possibility of getting wet from water or oil,A place with dust and

corrosive gas (sulfuration gas, ammonia gas, etc.)

The intense place of temperature change.

A place with fear of freezing and dew condensation.

The place where vibration and the influence of a shock are large.

Keep this unit away from any equipment producing the strong high frequency or

surge as much as possible. Otherwise, malfunction or trouble may occur.

Please use alcohol on the market without using thinners when washing.

Even though this product is used together with other units, always strictly follow the safety

precautions stated in this manual. CHINO shall not be held responsible for any defect arising from

negligence of such cautions and instructions.

Any relevant measures for safety such as sufficient tolerance and failsafe means shall be taken into

consideration when using this unit for an application that may seriously affect the human life or

property.

Subject to change without notice.

“Microsoft” and “Windows” are the trademarks or registered trademarks of Microsoft Corporation in the United

States.

Operating environment and system requirements

Personal Computer :Windows®XP Service Pack 3

Windows Vista®Service Pack 2 (32bit)

Windows 7 (32bit/64bit)

Windows 8 (32bit/64bit)

Communication port : One USB 1.1/2.0 compatible port

Hard disk drive : At least 10MB is required to install this software

CD-ROM drive : Required for the setup of an application driver

Printer : Color printer recommendation

Printer driver :Printer driver allowing of correct operation of the

printer on the OS listed above

Corresponding model : MR5300

,MR5320,MR6661,MR6662,MR7300

Data readout unit : MR9504

* Administrator privileges are required for installation.

Name of each part

USB Connector

Data communications windows

Installing the Software

Caution:・If other applications are running when installing this software, such application may

adversely affect the installation of the software. To avoid such troubles, exit all

currently running applications completely before starting the installation.

・In case of Windows Vista / 7/ 8, Confirmation screen appears when booting

the installer by UAC control. When appears this screen, Please select “Yes”.

・Administrator privileges are required for installation.

Installation procedure

Caution: Please do not tie a main part to a personal computer in the

stage of this installation

When apparatus is connected, although the following screens are displayed, please choose

"No, not this time" or "Ask me again later".

Power ON the personal computer to start up Windows.

Set the software CD-ROM supplied with this data read software package in the

CD drive.

【XP】

【Vista】

The installation begins automatically.

The drive No. (such as “C:＼”) that appears in the window may vary depending

on the system configuration of the personal computer you are using. When

reading the message shown in the above window, change the drive No. to that

corresponding to your personal computer environment.

CAUTION

If the installation of the software is not started up even though the CD-ROM is set,

double-click the [setup.exe] file contained in the CD-ROM to start installing the software.

In case of Windows Vista / 7/ 8, Confirmation screen appears when booting

the installer by UAC control. When appears this screen, Please select “Allow”or “Yes”.

Installation is started

Installation is

interrupted.

The installation place of a

program is changed.

Click "Next" to continue.

After verifying the license agreement,

click "Next" to continue.

Input the user information. The user information for the

currently logged in user will be displayed.

Click "Next" to continue.

(Next Page)

Inhaltsverzeichnis

Andere Chino Datenlogger Handbücher

Chino

Chino AL4000 series Bedienungsanleitung

Beliebte Datenlogger Handbücher anderer Marken

TESTO

TESTO 176 Bedienungsanleitung

HT Italia

HT Italia XL421 Bedienungsanleitung

HBM

HBM SOMAT XR CX22B-R Bedienungsanleitung

Agtrix

Agtrix 380i Bedienungsanleitung

Hobo

Hobo H8 Pro Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech PCI2320 Bedienungsanleitung

Athena

Athena GET SL1 Bedienungsanleitung

Motec Systems

Motec Systems C185 Bedienungsanleitung

Beijing ART Tech

Beijing ART Tech USB2832 Bedienungsanleitung

Rotronic

Rotronic HygroLog HL20 Bedienungsanleitung

MRC

MRC DW-6092 Bedienungsanleitung

Racelogic

Racelogic VBOX LapTimer Bedienungsanleitung

Edu-Logger

Edu-Logger 900-240 Bedienungsanleitung

Elma

Elma DT173 Bedienungsanleitung

MadgeTech

MadgeTech PRTemp140 Technisches Datenblatt

Comet

Comet U0121M Bedienungsanleitung

pico Technology

pico Technology PT-104 Bedienungsanleitung

Soil Instruments

Soil Instruments GTecLink Bedienungsanleitung