Chipsee PPC-CM4-150 Bedienungsanleitung

Industrial PC

PPC-CM4-150

PN: CS10768RA4150

Revision 1.1

www.chipsee.com

Contents

31. PPC-CM4-150

51.1. Product Overview

61.2. Ordering Options

61.2.1. Pi CM4 Module

61.2.2. Operating System

61.2.3. Optional Features

71.3. Specications

91.4. Power Input

101.5. Touch Screen

111.6. Connectivity

111.6.1. RS232/RS485/CAN

121.6.2. GPIO Port

141.6.3. USB Connectors

151.6.4. LAN Connectors

151.6.5. WiFi & BT Module

161.6.6. 3G/4G/LTE Module

171.6.7. Zigbee Module

201.7. TF Card Slot

211.8. Audio Connectors

221.9. PROG Button

231.10. Mounting Procedure

241.11. Mechanical Specications

241.11.1. CS10768RA4150P

251.12. Disclaimer

251.13. Technical Support

Chipsee IPC Page 2 of 25

PPC-CM4-150

Front View

Rear View

PPC-CM4-150

Chipsee IPC Page 3 of 25

Side View 1

Side View 2

PPC-CM4-150

Chipsee IPC Page 4 of 25

Product Overview

The Cortex -A72 Raspberry Pi series PPC-CM4-150 (PN: CS10768RA4150) is a high-quality

industrial Pi PC. It features a 15” Ten-point capacitive touch screen with a resolution of 1024

x 768 pixels and brightness of 400 cd/m .

Key Applications

Human Machine Interface HMI

Process Control

Process Monitoring

HMI

IIoT node

Environmental Monitoring

PLC

Automotive applications

ATM…

It is available both as an embedded solution and as a device hosed in a casing with bezels,

thus facilitating dierent installation options:

Installation on an industrial cabinet

Integration with the existing equipment

The PPC-CM4-150 industrial Pi PC is based around the powerful Raspberry Pi Compute

Module 4, powered by the Quad Cortex -A72 processor with a processor speed of 1.5GHz.

® ®

•

PPC-CM4-150 Product Overview

Chipsee IPC Page 5 of 25

Ordering Options

Chipsee products can be customized during the ordering process. The product will be

shipped with the pre-installed factory defaults if no extra requirements are specied. The

table in the Specications section provides information about the default options bundled

with the product.

Pi CM4 Module

The Pi Compute Module 4 appears in dierent versions depending on the size of the DDR4

and eMMC.

The PPC-CM4-150 industrial Pi PC does not include the CM4 Raspberry Pi module by

default. If you would like to purchase it with a CM4, you can select it at the Chipsee store

during the ordering process.

Operating System

This product comes with a pre-installed Debian OS. Chipsee software engineers have

created all the drivers, so every hardware feature is readily available for any standard

development tool.

If your project requires a dierent OS, please Contact us, and we’ll make a customized

version that suits your needs.

Optional Features

The PPC-CM4-150 industrial Pi PC does not include the 3G/4G/LTE modules by default.

These modules are optional and can be selected at the Chipsee store during the ordering

process.

Note

You can order PPC-CM4-150 from the ocial Chipsee Store or from your nearest distributor.



Warning

Installation, repair, and maintenance tasks should be performed by trained personnel only.

Chipsee does not bear any responsibility for damage caused by inadequate handling of the product.



PPC-CM4-150 Ordering Options

Chipsee IPC Page 6 of 25

Specifications

The PPC-CM4-150 industrial Pi PC oers a broad range of performance and connectivity

options for scalable integration, providing expandability according to future needs. Some of

the key features are listed in the table below.

PPC-CM4-150

CPU Raspberry Pi CM4, CM4 Lite; Quad Cortex-A72 at 1.5GHz

Storage Support for 1 x TF Card3

RAM 2/4/8 GB, Based on CM4

eMMC 16/32 GB, Based on CM4

Display 15” IPS LCD, 1024 x 768 resolution px, brightness 400 cd/m

Touch 10-point capacitive touch with 1mm Armored Glass

USB 2 x USB 3.0 Host, 1 x USB OTG

LAN 1 x Channel Giga LAN

Audio 3.5mm Audio Out Connector, 2W Speaker Internal

Buzzer Onboard Buzzer, driven by GPIO

RTC Yes, High Accuracy RTC with Lithium Button Coin battery (lithium battery not

included)

RS232 Default to 2 x RS232, up to 4 x RS232

RS485 Default to 2 x RS4851, these 2 x RS485 can be congured as 2 x RS232

CAN 1 x CAN-BUS

GPIO 8 Channels, 4 Input, 4 Output

I2C Not Supported

WiFi/BT Supported but depending on the CM4 selected2

ZIGBEE Onboard Zigbee module, not mounted by default

HDMI Not Supported

SATA II Not Supported

3G/4G/LTE Supported, not mounted by default

Camera No

Power Input From 12V to 36V

Current at 12V 1400mA Max

Power Consumption 17W Typical

Working

Temperature From 0°C to +80°C

PPC-CM4-150 Specications

Chipsee IPC Page 7 of 25

The RS485 circuit controls the Input and Output direction automatically, there’s no need to control it from

within the software.

The default product without the CM4 does not include a Wi-Fi/BT module. You can include a CM4 that has the

Wi-Fi/BT module at the Chipsee store during the ordering process.

This TF card is designed for storage expansion, as the TF card uses the same pins with WiFi, it can’t be used

with WiFi at the same time

PPC-CM4-150

OS Debian

Dimensions CS10768RA4150P: 376 x 300 x 57mm

Weight CS10768RA4150P: 4500g

Table 243 Key Features

PPC-CM4-150 Specications

Chipsee IPC Page 8 of 25

Power Input

The PPC-CM4-150 industrial Pi PC can be powered by a wide range of input voltages: From

12V to 36V DC. It is a 3 Pin, 3.81mm screw terminal connector. As shown in the gure

below.

Power Input

Note that the “+” sign represents the positive power input, and it is printed both at the

casing and as a silk-screen on the board of the embedded version. The “-” terminal is

shorted to the ground.

Power Input Denition

Pin Number Denition Description

Pin 1 Positive Input DC Power Positive Terminal

Pin 2 Negative Input DC Power Negative Terminal

Pin 3 Ground Power System Ground

Table 244 Power Connector

Note

The system ground “G” is connected to power negative “-” on board.



PPC-CM4-150 Power Input

Chipsee IPC Page 9 of 25

Touch Screen

The PPC-CM4-150 industrial Pi PC uses a 10-point capacitive touch screen. However, the

Debian OS supports only One-Point touch.

The gure below shows the capacitive touch screen connected to the motherboard via the

USB connector.

Capacitive Touch Connector

Attention

A capacitive touch screen is susceptible to power noise and Electromagnetic Radiation (EMR). It may cause LCD ripples

or even capacitive touch malfunction. If using a capacitive multi-touch test application, you might notice the touch

points oat erratically across the display. There are several solutions to this problem:

Use a high-quality Power Adapter Unit (PSU) with low EMR. You can also provide power from a battery.

Make sure that the PPC-CM4-150 Power Input connector (pin 3) is properly connected to the Power System

Ground to provide sucient EMI shielding and eliminate the problem entirely.

Bad GND problems can also be conrmed by touching pin 3 of the Power Input connector with one hand while

operating the capacitive touch screen with the other hand. In this case, the operator’s body acts as the Power

System Ground.



PPC-CM4-150 Touch Screen

Chipsee IPC Page 10 of 25

Inhaltsverzeichnis

Andere Chipsee Industrie-PC Handbücher

Chipsee

Chipsee PPC-CM4-236 Bedienungsanleitung

Chipsee

Chipsee EPC-A72-101-C Bedienungsanleitung

Chipsee

Chipsee PPC-A55-121 Bedienungsanleitung

Chipsee

Chipsee AIO-CM4-156 Bedienungsanleitung

Chipsee

Chipsee PPC-A72-133-P Bedienungsanleitung

Chipsee

Chipsee EPC/PPC-A9-097-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-101 Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-070 Bedienungsanleitung

Chipsee

Chipsee PPC-A8-097-C Bedienungsanleitung

Chipsee

Chipsee PPC-J6412-156-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-150-C Bedienungsanleitung

Chipsee

Chipsee AM335X Bedienungsanleitung

Chipsee

Chipsee PPC-A9-121-U-C Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-101 Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-133 Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-215 Bedienungsanleitung

Chipsee

Chipsee PPC-A55-101 Bedienungsanleitung

Chipsee

Chipsee EPC-CM4-050 Bedienungsanleitung

Chipsee

Chipsee PPC-A55-150 Bedienungsanleitung

Chipsee

Chipsee PPC-A9-150-C Bedienungsanleitung

Chipsee

Chipsee PPC-CM4-190 Bedienungsanleitung

Chipsee

Chipsee CS19108R125 Bedienungsanleitung

Chipsee

Chipsee EPC/PPC-A72-070-C Bedienungsanleitung

Chipsee

Chipsee PPC-A72-150-P Bedienungsanleitung

Beliebte Industrie-PC Handbücher anderer Marken

Advantech

Advantech UNO-2184G Bedienungsanleitung

MSI

MSI MS-9A76 Bedienungsanleitung

Stackrack

Stackrack THOR200 Bedienungsanleitung

Moxa Technologies

Moxa Technologies DA-682C Series Bedienungsanleitung

Nodka

Nodka eBOX-3000-ETC Bedienungsanleitung

Siemens

Siemens SIMATIC IPC627E Bedienungsanleitung

MSI

MSI MS-9A89 Bedienungsanleitung

Artila

Artila Matrix-516 Bedienungsanleitung

Siemens

Siemens SIMATIC Rack PC 840 V2 Bedienungsanleitung

Advantech

Advantech IPPC-6152A Bedienungsanleitung

Beckhoff

Beckhoff CX9020 Bedienungsanleitung

Dell

Dell Embedded Box PC 5000 Bedienungsanleitung

IBASE Technology

IBASE Technology ASB200-918 Series Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M90q Betriebsanleitung

IXXAT

IXXAT Econ 100 Bedienungsanleitung

Kontron

Kontron KBox A-151-TGL Bedienungsanleitung

AXIOMTEK

AXIOMTEK ICO500-518 Series Bedienungsanleitung

JLT

JLT 1214N Bedienungsanleitung