Choice 407LETCUT1 Bedienungsanleitung
User Manual
Item #407LETCUT1
1” x 1” Cut
Item #407LETCUT12
1/2” x 1/2” Cut
07/2020
Lettuce Cutters
Safety Instructions
Be careful when handling and operating the machine, as the blades are very sharp. Always keep
your hands away from the blades.
Operation
1) Remove ring pin from lockdown position hole.
2) Insert ring pin into hole on handle.
3) Lift and hold the handle in the upright position and place a head of lettuce on the blade
surface.
4) Removehandsandngersfromthecuttingarea.
5) Firmly push the handle down so that the push plate forces the product completely
through the blades.
6) Clean the machine after chopping is complete using the cleaning instructions below.
7) Do not attempt to cut produce larger than the surface of the blade assembly.
Cleaning and Maintenance
1) Remove ring pin and use handle to lift push plate off of the guide rods.
2) Remove hold down clips and remove the blade assembly from the frame.
3) Use a damp cloth or sponge to wipe down the frame. Clean the push plate and blade
assembly thoroughly.
4) Make sure frame, blade assembly, and all other components are dried thoroughly.
5) Replace blade assembly, and then re-attach hold down clips.
6) Whennecessary,lubricateguiderodswithmineraloil,foodgradegrease,orparafn.Do
not use cooking oil.
7) Replace push plate then return handle to down position. Replace the ring pin for safe
storage.
Please read and comply with the instructions listed on this document. To get the best service
life and performance from your machine, clean it thoroughly before and after each use by
following the instructions listed below. Minimize the use of alkaline cleaners as they may dull
thenishandcausepitting.
User Manual
Lettuce Cutters
Replacement Parts
User Manual
Lettuce Cutters
Blade Assembly ½” x ½”
#407LETBLD12
Bushing
#181BUSHING2
Chain and Pin Assembly
#181CHAINPIN
Bumper
#181BUMPER2
Blade Assembly 1” x 1”
#407LETBLD1
Non-Skid Feet
#407NSKIDFEET
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Choice Cutter Handbücher
Beliebte Cutter Handbücher anderer Marken
Milwaukee
Milwaukee HEAVY DUTY M12 FCOT Bedienungsanleitung
Makita
Makita DCS552 Bedienungsanleitung
SignWarehouse.com
SignWarehouse.com Bobcat BA-60 Bedienungsanleitung
Makita
Makita 4112HS Bedienungsanleitung
GEISMAR STUMEC
GEISMAR STUMEC MTZ 350S Bedienungsanleitung
Hitachi
Hitachi CM 4SB2 Fehlerbehebungshandbuch
