ChoiceMMed CFT-308 Bedienungsanleitung

Infrared Thermometer

User Manual

Issue Date：April 10, 2020

Version：1.0

Contents

Introduction················································································································1

Precautions ················································································································1

Indications for Use·······································································································2

Symbol Definitions ·····································································································2

Product Features·········································································································2

Appearance················································································································3

Battery Installation·······································································································3

Select Age Range········································································································3

Measure Forehead Temperature·····················································································4

Measure Object Temperature·························································································5

Change the Temperature Scale ·····················································································5

Memory Search···········································································································6

Power off····················································································································6

Troubleshooting··········································································································6

Maintenance and Storage ·····························································································6

Specifications·············································································································7

Warranty and Repair ····································································································7

Box Content ···············································································································8

Declaration·················································································································8

Introduction

Thank you for choosing Choicemmed infrared Thermometer (CFT-308).

This thermometer is a high-quality product incorporating the latest technology and tested in accordance

with international measurement.

Please read these instructions carefully before using this product.

Precautions

Attentions

• Use of this thermometer is not intended as a substitute for consultation with your physician.

• Never use the thermometer for purposes other than those for which it has intended.

• Never immerse the thermometer into water or other liquids.

• Never insert a sharp object into the scanner or any other opened surface on the thermometer.

• Do not scratch the probe membrane, if not the thermometer shall lose the efficacy.

• Do not expose the thermometer to sunlight.

• Do not expose this thermometer to electric shock.

• Do not use near strongelectromagnetic fields, i.e. Keep it away from any radio systems and mobile

phones.

• Do not modify this device without authorization of the manufacturer.

• Do not impact the thermometer, otherwise it may affect the accuracy of the measurement.

• Do not let children take their temperatures unattended.

• This device must always be kept in a clean, dry area.

• This device includes small parts, don’t inhale or swallow it.

• Follow local ordinances and recycling instructions regarding disposal or recycling of the device and

device components, including batteries.

• The thermometer needs to acclimate to the temperature of the room in which the measurement will

be taken for 10 minutes.

• This equipment complies with IEC 60601-1-2:2014 for electromagnetic compatibility for medical

electrical equipment and/or systems. However, because of the proliferation of radio-frequency

transmitting equipment and other sources of electrical noise in healthcare and other environments, it

is possible that high levels of such interference due to close proximity or strength of a source might

disrupt the performance of this device.

• The material that contacts with the user’s skin contains ABS plastic enclosure and passes the

ISO10993-5 Tests for invitro cytotoxicity and ISO10993-10 Tests for irritation and delayed-type

hypersensitivity.

• Portable RF communications equipment (including peripherals such as antenna cables and external

antennas) should be used no closer than 30 cm (12 inches) to any part of the device, including

cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment

could result.

• The essential performance of the device: display the body temperature accurately. If the Essential

Performance is lost or degraded due to EM disturbances, the reading may inaccurate. Please do not

reference.

Intended Use

Infrared Thermometer is a reusable thermometer intended for the intermittent determination of human

body temperature in a no touch mode using the center of the forehead as the measurement site on

people of all ages. It can be used by consumers in the household environment and by healthcare

provider.

Symbol Definitions

Symbols

Definitions

Follow instructions for use

Attention

Manufacturer’s name and address

Manufacturing Date

Type BF applied part

WEEE disposal

Serial No.

Authorized representative in the European community

European union approval

Storage temperature and relative humidity

IP22

Protected against dust and Water

Battery Indication

Object Temperature Mode

Memory Symbol/Record Count

°C °F

Temperature Scale

Normal Temperature Range (human temperature mode)

Fever Temperature Range (human temperature mode)

Product Features

EASY TO USE

Smart appearance with only 2 buttons, very easy to use.

MULTI-MODE THERMOMETER

The infrared thermometer is designed for all ages, adults, infant and elders. It not only supports for

human, but is able to take room/object temperature. Two modes are easily switchable.

BEST THERMOMETER FOR BABY

1 second fast measurement with instant reading, just take the temperature without wake your baby up.

FEVER INDICATING SYSTEM

Equipped with fever warning system, the thermometer for fever will indicate temperature status with

corresponding face expression and beeps. Get better noticed of your temperature, urge you to take

corresponding actions.

CONVENIENT MEMORY FUNCTION

10*2 sets of readings are recorded for better tracking the changes of body temperature.

SAFE AND HYGIENIC

No touch helps minimize spreading of germs, completely safe for use on Children and adults.

AGE TEMPRERATURE DISTINCTION

Clinical research shows the definition of fever changes as newborns grow into Children grow into adults.

Select the appropriate age setting, take a temperature and the display will be different face expression

and beeps.

Appearance

Battery Installation

To install or replace the batteries, follow the steps:

1. Slide the battery cover off.

2. Install two AAA batteries into the battery compartment. Make sure to align the positive and negative

ends properly as indicated inside the compartment.

3. Replace the battery cover.

Notes:

• Please remove the batteries from the product if it is not required for extended periodsof time in order

to avoid leakage.

• To protect the environment, dispose of empty batteries at appropriate collection sites according to

national or local regulations.

Select Age Range

1. Power the thermometer on with a short press on power button. Each time you power it on, the

device will default to age range selecting mode.

2. Press and release power button to cycle through three age ranges. You may select:

36+months, 0-3 months, 3-36 months, the device will display as below:

Note:

The default age range is “36+months”.

Measure Forehead Temperature

Prepare for measurement:

Follow these guidelines to take an accurate and reliable measurement.

1. The individuals being measured should be indoors for 30 minutes before taking a measurement.

2. Individuals should not drink, eat, or be physically active before/while taking the measurement.

3. Ensure that the individual’s forehead is prepared for measurement.

• Remove any sweat prior to measurement.

• Remove hats and wait 10 minutes before taking the measurement.

• Remove dirt or hair from the forehead area and wait 10 minutes after cleaning before taking the

measurement.

• Avoid any cooling or warming cloths on the forehead for at least 30 minutes prior to measurement.

4. Keep the measurement sensor and lens clean. Avoid directly touching the sensor.

Take a measurement:

1. Select an age range (refer to selection “Select Age Range”);

2. Press scan button to enter “measuring” operation sequence;

3. Short press power button to toggle between human temperature mode (face symbol ) and object

temperature mode (house symbol ).

4. Position the thermometer on or up to 0.4 inch (1cm) away from center of

the forehead, between eyebrows. Do not directly contact with the

forehead.

Notes:

• Always take the temperature exactly as directed. Temperature results

may vary if positioned in wrong locations.

• Do not take temperature measurement over scar tissue, open sores, or abrasions.

• Hold the device and forehead steady.

5. Press scan button again. Read the temperature from the screen.

If the individual temperature being measured is normal, one “beep” will sound and smile face icon

will appear on the screen (see Fig. 1).

Fig. 1

If the individual temperature being measured is in the fever range, four “beeps” will be heard and upset

face icon will appear on the screen (see Fig. 2). If so, please take three temperatures at same location

and take the highest one as the reading (Wait at least 5 seconds between consecutive readings).

Fig. 2

Notes:

• The measurements can be recorded and transmitted via Bluetooth (Bluetooth transmission is optional).

The Bluetooth symbol will be lighted once the Bluetooth starts up, otherwise it will keep flashed.

• The battery symbol indicates the remaining battery capacity. When voltage of the battery is low,

the display flashes the low battery warningsymbol . The device can still work until the battery life has

0% left.

Read temperature

Age range Normal Fever High fever

0-3 Months ≥35.8-

≤37.4°C

(≥96.4-≤99.4°F)

N/A

>37.4°C

(>99.4°F)

3-36 Months

≥35.4-≤37.6°C

(≥95.7-≤99.6°F)

>37.6-≤38.5°C

(>99.6-≤101.3°C)

>38.5°C

(>101.3°F)

36+ Months ≥35.4-

≤37.7°C

(≥95.7-≤99.9°F)

>37.7-≤39.4°C

(>99.9-≤103.0°F)

>39.4°C

(>103.0°F)

Measure Object Temperature

1. Short press power button to turn the thermometer on;

2. Press scan button to enter “measuring” operation sequence;

3. Press power button to alternate and set object temperature mode (refer to “Take a Measurement”);

4. Position the object being measured;

5. Press scan button again, read the temperature from the screen (the display will show the result after

an audible “beep”.)

Fig. 3

Change the Temperature Scale

Long press power button to turn the device on and wait until temperature scale appears. Press and hold

power button to switch displays between °C and °F (shown as below). Release the button to confirm.

Fig. 4

Memory Search

1. Short press power button + scan button, the device will be powered on and default to records.

2. Short press scan button to alternate and check last ten measurements (M1-M10), shown as in Fig.

Fig. 5

Notes:

• Latest ten measurements of human temperatures can be memorized.

• Long press the scan button to revert to age range selecting mode.

Power Off

• Long press power button for about 4s to turn the thermometer off.

• The thermometer shall automatically shut off without manipulating in 30 seconds.

• The thermometer will power off if the batteries expire completely. The device will display the low

battery warning symbol “ ” and make beep sound.

Troubleshooting

Symbol Situation Solution

When themeasured forehead temperature is higher than 43℃

Re-measure the temperature

When the measured forehead temperature is lower than 32

℃

Re-measure the temperature

Battery exhausted Replace batteries

Maintenance and Storage

Please protect the thermometer from mechanical shock or heavy impact. Do not disassemble the unit or

attempt to repair it.

Cleaning:

1. Clean the lens before and after each use.

2. Use an alcohol swab or cotton swab moistened with alcohol (70% medical alcohol) to clean the

thermometer casing and the measuring probe. Wait 10 minutes and allow the thermometer to air-dry

before take a measurement. Ensure that no liquid enters the interior of the thermometer.

3. Never use abrasive cleaning agents, thinners or detergents for cleaning and never immerse the

instrument in water or other cleaning liquids. Take care not to scratch the surface of the probe

membrane or display.

Storage:

1. Store thermometer in a dry location free from dust and contamination and away from direct sunlight.

2. The ambient temperature at the storage location should remain fairly constant and within the range of

13°F to 158°F ( -25°C～70°C).

Specifications

Type: No touch forehead thermometer

Model: CFT-308

Lifetime: 5 years

Power: 2 x AAA batteries

Measuring distance: ≤0.4in (≤1cm)

Measurement Range: 89.6°F～109.4°F (32°C～43°C)

Resolution temperature range: 0.1°F（0.1°C）

Laboratory Accuracy: 0.4°F for 95°F～107.6°F（0.2°C for the range 35°C～42°C）; Outside that range

±0.5°F/0.3°C

Operation Temperature: 41°F～104°F (5°C～40°C)

Storage/transport temperature: 13°F～158°F（-25°C～70°C）

Ambient Humidity: 15%~93% (non-condensing) in operation;

≤93% (non-condensing) in storage/transport

Atmosphere pressure: 70kPa~106kPa

Dimension: 6.0*1.5*2.0 inches (151*38*50.2 (mm))

Weight: 103±5g (including batteries)

Classification

According to the type of protection against electric shock: INTERNALLY POWERED EQUIPMENT

According to the degree of protection against ingress of water: IP22

According to the mode of operation: CONTINUOUS OPERATION

Warranty and Repair

The warranty is valid for 12 months from the date of supply of Choicemmed.

User Guarantees

a) Please read user manual carefully before operation.

b) Please operate and make daily maintenance as request of manual and guarantee.

c) Power supply and environment must be maintained under manual specifications.

Exempt and limitation:

a) During the period of validity of the warranty, Choicemmed will repair and/or replace free of

charge all the defected parts due to production reasons. Labor costs and personnel traveling

expenses and packaging not included.

b) All components subject to wear are not included in the warranty.

c) The repair or replacement performed during the warranty period shall not extend the warranty.

d) The warranty is void in the following cases: repairs performed by unauthorized personnel or with

non-original spare parts, defects caused by negligence or incorrect use.

e) The warranty does not apply to damage caused by improper handling, unreasonable use,

accidents, not following the operating instructions or alterations made to the instrument by third

parties.

Box Content

Choicemmed Infrared Thermometer

Two AAA Batteries

Color Box

User Manual

Quick Start Guide

Declaration

FCC DECLARATION

Please take attention that changes or modification not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

Guidance and Manufacturer’s declaration – electromagnetic emissions-For all EQUIPMENT and

SYSTEMS

Guidance and Manufacturer’s declaration - electromagnetic emission

The CFT-308 Infrared Thermometer is intended for use in the electromagnetic environment specified

below. The customer or the user of CFT-308 Infrared Thermometer should assure that it is used in

such an environment.

Emission test

Compliance

Electromagnetic Environment – guidance

RF emissions CISPR 11 Group 1 The CFT-308 Infrared Thermometer uses RF energy

only for its internal function. Therefore

, its RF

emissions are very low

and are not likely to cause

any interference in nearby electronic equipment.

RF emissions CISPR 11

Class B

The Infrared Thermometer (CFT-308) is suitable for

use in all establishment, including domestic

establishments and those directly connected to the

public low-

voltage power supply network that

supplies buildings used for domestic purposes.

Harmonic emissions

IEC 61000-3-2 Not Applicable

Voltage fluctuations/

flicker emissions

IEC 61000-3-3

Not Applicable

Inhaltsverzeichnis

Andere ChoiceMMed Thermometer Handbücher

ChoiceMMed

ChoiceMMed iChoice T1 Bedienungsanleitung

Beliebte Thermometer Handbücher anderer Marken

Delton

Delton 981A Bedienungsanleitung

Baker

Baker MM2P Bedienungsanleitung

Tarmo

Tarmo 320281 Bedienungsanleitung

Citizen

Citizen CTD 504 Bedienungsanleitung

TFA

TFA 14.1500 Bedienungsanleitung

Vive

Vive DMD1010 Bedienungsanleitung

Gotemp

Gotemp THB4002 Bedienungsanleitung

GREISINGER

GREISINGER G 1202 Bedienungsanleitung

Amprobe

Amprobe TMD-53W Bedienungsanleitung

Trotec

Trotec BP10 Bedienungsanleitung

Radiance instruments

Radiance instruments RT616 Series Bedienungsanleitung

Eurolec

Eurolec IR151 Bedienungsanleitung

Scaneo

Scaneo TS42B Bedienungsanleitung

Sper scientific

Sper scientific 800043 Bedienungsanleitung

Motorola

Motorola MBP69SN Konfigurationshandbuch

The MeatStick

The MeatStick The MeatStick Bedienungsanleitung

Hama

Hama TH35-A Bedienungsanleitung

Veridian Healthcare

Veridian Healthcare 09-349 Bedienungsanleitung