Christie SUHD983-P Bedienungsanleitung

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 1

020-001868-01 Rev. 1 (11-2020)

This document provides firmware update instructions and describes what is new in this firmware version for

the SUHD983-P.

Learn what has been updated in this release.

Scaler Firmware, v1.0.2.1

• Added RS232 control command for setting OPS/HDMI4 EDID:

• EDU: EDID UHD

• EDF: EDID FHD

• EDI: EDID information

• Resolved the issue where the OPS displayed a black screen.

• Added multi-window configuration in portrait mode.

• Resolved the issue where there was white noise from the panel after a factory reset.

Ethernet Firmware, v11

• Updated the web interface.

• Moved the Multi-window page under Picture settings.

• Added the Preset settings page.

• Added the UHD or FHD OPS/HDMI4 EDID options.

System connection for uploading

1. Plug in a USB memory to the service terminal.

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 2

020-001868-01 Rev. 1 (11-2020)

2. Enter the Factory-Menu.

To enter the Factory-Menu by remote control:

SOURCE UP RIGHT LEFT DOWN

Before version 1.0.2.1-11

After version 1.0.2.1-11

3. Select Software Update (USB) and press the SEL button on the remote control.

You cannot enter Factory-Menu when set to Multi-Windows mode.

You must change Multi-Window mode to off to enter Factory-Menu.

USB Storage device

(That firmware for A/D B/D is stored)

(The file name of firmware is a 'SUHD983P.bin' )

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 3

020-001868-01 Rev. 1 (11-2020)

4. Select USB Update.

In the case of proper USB storage devices, “Connected” appears.

5. If “Connected” appears, select USB Update again.

The firmware is updated automatically and the panel goes into standby mode after a successful

firmware update (about 30 seconds).

a. Reset the main power switch to turn the panel back on.

b. Once the firmware update is complete, perform an Initial Setting in the Factory-Menu.

c. After Initial Setting, power off the panel using the rocker-switch.

d. Wait at least 10 seconds and power the panel back on.

6. If the USB storage device is not compatible, a “Can’t Detect USB” message appears.

7. Ensure the filename is always be SUHD983P.bin regardless of the software version to upload correctly.

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 4

020-001868-01 Rev. 1 (11-2020)

1. To use a static IP address, select Disable under DHCP.

Notice. The default static IP address is 192.168.10.10.

2. Select DHCP Enable to use a dynamic IP address.

If there is router, the IP address starts with 192.166.

If there is no router, the IP address starts with 169.254.

1. Go to Local Network Setting > Internet protocol version 4 (TCP/IPv4).

2. If DHCP is disabled, set the IP address and Subnet mask.

IP address must be a different address than the display.

IP address : 192.168.10.50

Subnet Mask : 255.255.255.0

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 5

020-001868-01 Rev. 1 (11-2020)

3. If DHCP is enabled, select Obtain an IP address automatically.

The ping test checks the Ethernet connection.

1. Press Windows + R.

2. Type cmd and click OK.

3. Type ping –t 192.168.10.10.

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 6

020-001868-01 Rev. 1 (11-2020)

4. Replace the IP address with the address of the display panel.

A response similar to below indicates the ping test was successful.

A response similar to below indicates the ping test failed.

Connect to the built-in web server open a Web browser (for example, Internet Explorer, Chrome) and follow

the instructions below.

1. In a web browser, go to the address of the display panel.

The web page provides all menu controls on the on-screen display.

2. To set a value, click Apply.

3. To display the current value, click Read.

4. To upgrade the Ethernet or Scaler firmware, go to the General settings page.

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 7

020-001868-01 Rev. 1 (11-2020)

• Ethernet firmware update time: about 5 minutes.

File name : Ethernet_FW_V*.bin (* = version)

• Scaler firmware update time: about 8 minutes

File name : SUHD983-P.bin

For installation, setup, and user information, see the product documentation available on the Christie

website. Read all instructions before using or servicing this product.

1. Access the documentation from the Christie website:

• Go to this URL:http://bit.ly/2rO6SF6.

• Scan the QR code using a QR code reader app on a smartphone or tablet.

2. On the product page, select the model and switch to the Downloads tab.

Additional information on the LCD panels is available in the following documents.

• SUHD983-P LCD Panels Product Safety Guide (P/N: 020-001714-XX)

• SUHD983-P LCD Display Panels External Commands (P/N: 020-001766-XX)

• SUHD983-P LCD Panels Service Guide (P/N: 020-001723-XX)

Software Release Notes

SUHD983-P Release Notes–Scaler Firmware v1.0.2.1, Ethernet v11 8

020-001868-01 Rev. 1 (11-2020)

Technical support for Christie products is available at:

• North and South America: +1-800-221-8025 or [email protected]

• Europe, Middle East, and Africa: +44 (0) 1189 778111 or [email protected]

• Asia Pacific

• Australia: +61 (0)7 3624 4888

• China: +86 10 6561 0240

• India: +91 (80) 6708 9999

• Japan: 81-3-3599-7481

• Singapore: +65 6877-8737

• South Korea: +82 2 702 1601

• Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com

Andere Handbücher für SUHD983-P

Inhaltsverzeichnis

Andere Christie Monitor Handbücher

Christie

Christie UHD551-L Benutzerhandbuch

Christie

Christie SUHD983-P-A LCD Bedienungsanleitung

Christie

Christie Velvet Core Series Montageanleitung

Christie

Christie QUADHD84 Bedienungsanleitung

Christie

Christie 38-FP0002-01 Bedienungsanleitung

Christie

Christie CS50-D100U Bedienungsanleitung

Christie

Christie Velvet Core Series Bedienungsanleitung

Christie

Christie II Series Gebrauchs- und Pflegehandbuch

Christie

Christie MicroTiles Montageanleitung

Christie

Christie Secure II Series Bedienungsanleitung

Christie

Christie Velvet Apex LED009-AL Montageanleitung

Christie

Christie UHD551-L Bedienungsanleitung

Christie

Christie MicroTiles Gebrauchs- und Pflegehandbuch

Christie

Christie 38-FP0001-01 Bedienungsanleitung

Christie

Christie Velvet CorePlus LED014-CP-I Montageanleitung

Christie

Christie SUHD983-P Gebrauchs- und Pflegehandbuch

Christie

Christie Secure Series Montageanleitung

Christie

Christie FHQ841-T Bedienungsanleitung

Christie

Christie FHD552-X Bedienungsanleitung

Christie

Christie FHD554-XZ Bedienungsanleitung

Christie

Christie Access Series Bedienungsanleitung

Christie

Christie CC50-2301 Bedienungsanleitung

Christie

Christie FHD553-X Gebrauchs- und Pflegehandbuch

Christie

Christie MicroTiles Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung