Christie CP2415-Xe Montageanleitung

Installation and Setup Guide

020-103584-02

CP2415-Xe

NOTICES

All brand names and product names are trademarks, registered trademarks or trade names of their respective holders.

GENERAL

Every effort has been made to ensure accuracy, however in some cases changes in the products or availability could occur which may not be reflected in this

document. Christie reserves the right to make changes to specifications at any time without notice. Performance specifications are typical, but may vary

depending on conditions beyond Christie's control such as maintenance of the product in proper working conditions. Performance specifications are based on

information available at the time of printing. Christie makes no warranty of any kind with regard to this material, including, but not limited to, implied

warranties of fitness for a particular purpose. Christie will not be liable for errors contained herein or for incidental or consequential damages in connection

with the performance or use of this material. Our centers of excellence for manufacturing in Kitchener, Ontario, Canada and in Shenzhen, China are ISO

9001:2015 Quality Management System-certified.

For the most current technical documentation and office contact information, visit http://www.christiedigital.com.

Warranty

Products are warranted under Christie’s standard limited warranty, the details of which are available at https://www.christiedigital.com/help-center/

warranties/ or by contacting your Christie dealer or Christie.

PREVENTATIVE MAINTENANCE

Preventative maintenance is an important part of the continued and proper operation of your product. Failure to perform maintenance as required, and in

accordance with the maintenance schedule specified by Christie, will void the warranty.

ENVIRONMENTAL

The product is designed and manufactured with high-quality materials and components that can be recycled and reused. This symbol means that electrical

and electronic equipment, at their end-of-life, should be disposed of separately from regular waste. Please dispose of the product appropriately and according

to local regulations. In the European Union, there are separate collection systems for used electrical and electronic products.

If printing this document, consider printing only the pages you need and select the double-sided option.

Please help us to conserve the environment we live in!

Content

Introduction...................................................... 5

Product documentation................................................5

Related documentation..............................................5

Safety precautions...................................................5

General precautions................................................6

AC power precautions...............................................6

Lamp precautions.................................................7

Light intensity hazard distance.........................................8

Product labels...................................................10

Projector overview..................................................12

Key features......................................................13

List of components..................................................13

Accessories.................................................... 13

CineMaster cinema calculator tool........................................ 14

Contact your dealer.................................................15

Technical support...................................................15

Installation and setup..............................................16

Site requirements.................................................. 16

Power specifications...............................................16

Projector components................................................17

Preparing the installation site...........................................17

Required tools and components..........................................18

Lifting and positioning the projector.......................................18

Adjusting the projector tilt and level.......................................18

Optionally connecting the exhaust duct.....................................19

Installing the lens..................................................19

Installing the lamp..................................................21

Installing the IMB.................................................. 23

Connecting power..................................................24

Turning the projector on for the first time................................. 25

Disposing of the product packaging....................................... 25

Connecting devices and establishing communication.....................26

CP2415-Xe Installation and Setup Guide 3

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Video Input panel.................................................. 26

Using the Remote user interface (UI)......................................27

Turning the projector on or off.......................................... 28

Logging on to the projector............................................ 28

Turning the light source on or off.........................................28

Selecting IMB preferences.............................................29

Activating marriage.................................................29

Operation....................................................... 30

Turning the projector on..............................................30

Turning the projector off..............................................30

Projector states....................................................30

Adjusting the image............................................... 32

Maximizing light output...............................................32

Calibrating the Intelligent Lens System.....................................32

Aligning the image..................................................32

Adjusting offset by using an ILS .........................................33

Correcting vignetting................................................ 33

Correcting keystone effect.............................................33

Adjusting DMD convergence ........................................... 34

Electronically adjusting convergence.......................................36

Adjusting the left and right boresight ......................................37

Adjusting the top and bottom boresight ....................................40

Rotating the integrator rod ............................................43

Adjusting the fold mirror ..............................................44

Calibrating the color.................................................45

Regulatory...................................................... 46

Safety......................................................... 46

Electro-magnetic compatibility.......................................... 46

Emissions..................................................... 46

Immunity..................................................... 46

California law on security..............................................46

Environmental.................................................... 47

Content

CP2415-Xe Installation and Setup Guide 4

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Introduction

This manual is intended for qualified installers and trained operators of Christie CP2415-Xe projection

systems.

Product documentation

For installation, setup, and user information, see the product documentation available on the Christie

website. Read all instructions before using or servicing this product.

To access the documentation from the Christie website:

• Go to this URL: https://bit.ly/3vxrm4Y or

https://www.christiedigital.com/products/cinema/projection/cinelife-plus-series/.

• Scan the QR code using a QR code reader app on a smartphone or tablet.

• On the product page, select the model and switch to the Downloads tab.

Related documentation

Additional information on this product is available in the following documents.

•CP2415-Xe Product Safety Guide (P/N: 020-103673-XX)

•CineLife+ User Guide (P/N: 020-103073-XX)

•CineLife+ Serial Commands Guide (P/N: 020-103075-XX)

•CP2415-Xe Service Guide (P/N: 020-103582-XX)

Safety precautions

When installing the projector, observe these important safety rules to avoid personal injury or damage

to the projector.

This projector must be operated in an environment that meets the operating range specified in the

environmental specifications (on page 16).

CP2415-Xe Installation and Setup Guide 5

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

General precautions

Read all safety and warning guidelines before installing or operating the projector.

Warning! If not avoided, the following could result in death or serious injury.

• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated

light beam of the projector.

• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be

tripped over, or damaged by persons walking on or objects rolling over the cables.

• This product must be installed within a restricted access location not accessible by the general

public.

• Only personnel who are trained on the precautions for the restricted access location can be

granted entry to the area.

• Install the product so users and the audience cannot enter the restricted area at eye level.

• ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.

• High leakage current present when connected to IT power systems.

• FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts

specified by Christie.

• Do not install or operate the projector in any position that does not meet the stated product

specifications for alignment and orientation.

• Do not look directly into the lens when the light source is on. The extremely high brightness can

cause permanent eye damage.

• UV EXPOSURE! For protection from harmful radiation, keep all product housings intact during

operation.

• Protective safety gear and goggles are recommended when servicing.

AC power precautions

Read all safety and warning guidelines before connecting to AC power.

If you cannot insert the plug into the existing outlet, contact an electrician to have the outlet replaced.

Introduction

CP2415-Xe Installation and Setup Guide 6

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Warning! If not avoided, the following could result in death or serious injury.

• SHOCK HAZARD! Only use the AC power cord provided with the product or recommended by

Christie.

• FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and

power plug meet the appropriate local rating standards.

• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage

and current, as specified on the license label.

• SHOCK HAZARD! The optional UPS power cord must be inserted into an outlet with grounding.

• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,

removing components, or opening any enclosure.

• SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product

by Christie qualified technicians or electricians before it can be connected to power.

• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be

tripped over, or damaged by persons walking on or objects rolling over the cables.

• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.

• Install the product near an easily accessible AC receptacle.

Caution! If not avoided, the following could result in minor or moderate injury.

• Only Christie qualified technicians are permitted to open product enclosures.

• FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.

• FIRE OR SHOCK HAZARD! Do not overload power outlets and extension cords.

• SHOCK HAZARD! Power supply uses double pole/neutral fusing.

Lamp precautions

Before opening the lamp door or handling the lamp, make sure that everyone within the vicinity of the

projector is wearing the required protective clothing.

Warning! If not avoided, the following could result in death or serious injury.

• EXPLOSION HAZARD! Always wear protective safety clothing (gloves, jacket, face shield)

approved by the manufacturer whenever the lamp door is open or when handling the lamp. Any

local or federal specifications take precedence over Christie's protective clothing

recommendations.

• Do not open the lamp door while the lamp is on.

• EXPLOSION HAZARD! Allow sufficient time for the lamp to cool down before powering down the

product, disconnecting it from AC, and opening the lamp door.

• EXPLOSION HAZARD! Lamps and bare bulbs, even when packaged, may explode if dropped or

mishandled.

Introduction

CP2415-Xe Installation and Setup Guide 7

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Light intensity hazard distance

This projector has been classified as Risk Group 3 as per the IEC 62471-5:2015 standard due to

possible hazardous optical and thermal radiation being emitted.

Warning! If not avoided, the following could result in serious injury.

• PERMANENT/TEMPORARY BLINDNESS HAZARD! No direct exposure to the beam must be

permitted.

• PERMANENT/TEMPORARY BLINDNESS HAZARD! Operators must control access to the beam

within the hazard distance or install the product at the height that prevents exposure of

spectators' eyes within the hazard distance. The hazard zone must be no lower than 2.5 meters

(US installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand and the horizontal clearance to the hazard zone must be a minimum 1.0

meters.

• EXTREME BRIGHTNESS! Do not place reflective objects in the product light path.

The following show the zones for ocular and skin hazard distances.

• A—Hazard zone. The region of space where the projection light from the projector is above

emission limits for Risk Group 2. The light intensity may cause eye damage after a momentary

or brief exposure (before a person can avert his or her eyes away from the light source). The

light may cause skin burns to occur.

• B—Hazard distance. Operators must control access to the beam within the hazard distance or

install the product preventing potential exposure of the spectators' eyes from being in the

hazard distance.

• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 1.0

meters.

• D—Vertical distance to hazard zone. The hazard zone must be no lower than 2.5 meters (US

installations) or 2.0 meters (global installations) above any surface upon which any persons

are permitted to stand.

If the vertical distance to hazard zone requirement (Zone D) is satisfied, the horizontal

clearance distance (Zone C) is not needed.

• E—Represents the top view of the projector.

Introduction

CP2415-Xe Installation and Setup Guide 8

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

• F—Represents the side view of the projector.

Projection lens Part number

1.05:1 DLP CINE zoom 108-319104-XX

1.2-1.75:1 DLP CINE zoom 108-350109-XX

1.39-1.9:1 DLP CINE zoom 108-327103-XX

1.5-2.2:1 DLP CINE zoom 108-329105-XX

1.75-2.4:1 DLP CINE zoom 108-321107-XX

1.9-3.0:1 DLP CINE zoom 108-328104-XX

2.4-3.9:1 DLP CINE zoom 108-322108-XX

3.9-6.5:1 DLP CINE zoom 108-323109-XX

CP2415-Xe hazard distances

Hazard

distance

(m)

Throw ratio

Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.

Introduction

CP2415-Xe Installation and Setup Guide 9

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or

black and white.

General hazards

Hazard warnings also apply to accessories once they are installed in a Christie product that is

connected to power.

Fire and Shock Hazard

To prevent fire or shock hazards, do not expose this product to rain or moisture.

Do not alter the power plug, overload the power outlet, or use it with extension cords.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Electrical Hazard

Risk of electric shock.

Do not remove the product enclosure.

Only Christie qualified technicians are authorized to service the product.

Warning! If not avoided, the following could result in death or serious injury.

Electric shock hazard. To avoid personal injury, disconnect all power sources before

performing maintenance or service.

Electrocution hazard. To avoid personal injury, always disconnect all power sources

before performing maintenance or service procedures.

Explosive material hazard. To avoid personal injury, disconnect all power sources

before performing maintenance or service, and wear Christie-approved protective

clothing.

Optical radiation hazard. To avoid personal injury, never look directly at the light

source.

Voltage hazard. To avoid personal injury, always disconnect all power sources before

performing maintenance or service procedures.

Introduction

CP2415-Xe Installation and Setup Guide 10

020-103584-02 Rev. 1 (09-2022)

If printed, please recycle this document after use.

Inhaltsverzeichnis

Andere Christie Projektor Handbücher

Christie

Christie LX450 103-010100-01 Bedienungsanleitung

Christie

Christie LX66 Bedienungsanleitung

Christie

Christie CP2315-RGB Montageanleitung

Christie

Christie J Series Bedienungsanleitung

Christie

Christie RoadRunner LX100 Bedienungsanleitung

Christie

Christie VIVID 38-VIV205-01 Bedienungsanleitung

Christie

Christie Vista S3 Bedienungsanleitung

Christie

Christie L2K1500 Bedienungsanleitung

Christie

Christie LX501 Bedienungsanleitung

Christie

Christie LX750 Bedienungsanleitung

Christie

Christie D13HD-HS Bedienungsanleitung

Christie

Christie 38-VIV403-01 Bedienungsanleitung

Christie

Christie Mirage SST Montageanleitung

Christie

Christie Mirage HD Bedienungsanleitung

Christie

Christie HD2Kc Bedienungsanleitung

Christie

Christie HS Series Betriebsanleitung

Christie

Christie Q Series Bedienungsanleitung

Christie

Christie LX505 Bedienungsanleitung

Christie

Christie Vivid LX35 Bedienungsanleitung

Christie

Christie CP4415-RGB Gen2 Montageanleitung

Christie

Christie Solaria CP2210 Bedienungsanleitung

Christie

Christie M Series Bedienungsanleitung

Christie

Christie CineLife+ Series Betriebsanleitung

Christie

Christie LX1500 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung