Christie Vivid Red Leitfaden

When the lamp reaches the end of its service life, the image will become

darker and colors lose their richness. When the lamp has been operating for

1400 hours or longer, the lamp status LED indicator will flash green, and the

message "The lamp is reaching its limits. Please replace the lamp as soon as

possible" will be displayed on the screen. Even though the lamp may still be

working, replace the lamp to maintain optimal projector performance. When

the lamp has been operated for 1500 hours, the message " LAMP

EXPIRED!!" will be shown on the screen, replace the lamp immediately.

DO NOT TOUCH THE LAMP immediately after it has been used. It will be

extremely hot. Allow the fan to finish its cooling process, then turn the

projector off, and disconnect the power cord. Allow at least for

the lamp to cool down before handling.

DO NOT REMOVE ANY SCREWS except the lamp cover screw and two

lamp housing screws. Removing other screws could result in electric

shock to the user.

If continuing to use the lamp after the replacing lamp message has been

displayed on screen, the lamp bulb may shatter, and pieces of glass

may scatter inside the projector and out into the room. Do not touch

them as the pieces of glass may cause injury. If this happens, contact

your dealer for lamp replacement.

one hour

CAUTION

VIVID Red

Lamp Replacement Instructions

To Replace the Lamp:

To Reset the Lamp Timer:

1. Loosen the lamp cover screw and remove the lamp cover.

2. Loosen the two screws securing the lamp housing. Remove the lamp

housing by pulling on the handle.

3. Insert a new lamp housing until it is plugged into the socket.

4. Secure it in place with the two screws.

5. Re-attach the lamp cover.

6. Tighten the lamp cover screw.

7. Reset the lamp timer.

1. Press Left button, Menu button, and Up button within one second on the

control keypad or remote control to enter engineering menu as shown:

2. Go to lamp reset sub-menu and move the cursor to Reset option. Press

Right button to select.

3. Lamp timer will reset to 0 hour usage.

There are two air filter sponges in the bottom of the Vivid Red projector to

capture dust or dirt and should be replaced whenever the lamp module is

replaced. The temperature will rise and the lamp will fail to light when the air

filters inside of the projector become dirty and clogged. Replacement will be

required more often if the projector is used in the a particularly dusty

environment.

Replacing the

Air Filter

1. Unplug the power cord from the socket.

2. Remove the small filter holder and

unscrew the big air filter screw.

3. Detach the air filters.

4. Replace the air filters.

5. Install the air filters.

6. Re-install the filter covers.

Inhaltsverzeichnis

Andere Christie Projektor Handbücher

Christie

Christie DHD600-G Bedienungsanleitung

Christie

Christie GS Series Gebrauchs- und Pflegehandbuch

Christie

Christie J Series Bedienungsanleitung

Christie

Christie Roadie 25K Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Christie

Christie CineLife+ RGB PLF Montageanleitung

Christie

Christie GraphXMASTER DLV1400-DX Bedienungsanleitung

Christie

Christie 38-MX3001-01 Bedienungsanleitung

Christie

Christie Mirage S+3K Bedienungsanleitung

Christie

Christie Q Series Installations- und Betriebsanleitung

Christie

Christie DHD630-GS Bedienungsanleitung

Christie

Christie 38-VIV303-01 Bedienungsanleitung

Christie

Christie 4K40-RGB Series Bedienungsanleitung

Christie

Christie LX750 Bedienungsanleitung

Christie

Christie Mirage SIM Bedienungsanleitung

Christie

Christie DS Series Bedienungsanleitung

Christie

Christie RPMX-D120U Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Christie

Christie Mirage S+ Bedienungsanleitung

Christie

Christie LX400 Bedienungsanleitung

Christie

Christie IMB Bedienungsanleitung

Christie

Christie GS Series Bedienungsanleitung

Christie

Christie Mirage WU-L Bedienungsanleitung

Christie

Christie APS Series Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung