Christopher Ward C1 Moonglow Benutzerhandbuch

C1 Moonglow

Owner’s Handbook

Time on your side

Your Christopher Ward watch has been designed in Britain

and engineered in Switzerland by highly talented craftspeople.

This ensures not only accurate and precise timekeeping, but also

brings a real pride of ownership that only watches of the highest

quality standards can hope to deliver.

You have made an investment, a good one, and the aim of this

manual is to help you make the most of that investment in what

we hope will be a lifetime of ownership.

Chris, Mike and Peter

(Co-founders)

2222

C1 Moonglow

If there’s a generalisation that rings true of moonphase watches,

it’s that they tend to conform to a particularly understated formula.

The C1 Moonglow is the antithesis of this. 50 years after Neil

Armstrong rst set foot on the Moon’s dusty surface, the Moonglow

oers a distinctively modern take on the most classical of

watchmaking genres.

Most distinctive is the inclusion of two moons that perpetually circle

around the Moonglow’s dial. Powered by Calibre JJ04, Christopher

Ward’s in-house modication (could it be described as our own lunar

module?), the position of the moon will remain unerringly accurate

to a day every 128 years if kept wound.

Yet the most dramatic inclusion here is that of the premium-grade

Grade X1 GL C1 Super-LumiNova®that coats the C1’s moons, hands,

indexes and date wheel; in particular, the latter feature replaces a

conventional date window with an entire lumed ring visible around

the outside of the dial, save for one non-lumed section that indicates

the date when read against the numbers outside it.

A watch as innovative as the C1 Moonglow deserves the best possible

lume to match; and like the pearly presence in the night’s sky that

has fascinated humankind for millennia, we hope you’ll nd the

Moonglow just as enchanting.

4444

How to operate your C1 Moonglow

Crown

Minute hand

Hour hand

Seconds hand

Date indicator

C1 Moonglow has a maximum power reserve of 38 hours when

fully wound. To re-power the watch after a period of non-use,

simply wind the crown in a clockwise direction for approximately

20 revolutions. Normal wearing will very quickly allow the rotor

to start re-powering the watch over time after putting it on

your wrist.

Display and control buttons

Features

• Swiss made

• Self-winding 26 jewel movement with

‘JJ04’ in-house Moonphase module

• 38 hour power reserve

• Lumed date ring with shaded section

• Black diamond-like carbon (DLC)

nished rotor

• Brushed and polished marine-grade

stainless steel case

• Anti-reective domed sapphire crystal

• Push-down crown with twin ag motif

• Polished and smoked sapphire dial

• 3D-stamped luminescent Moonphase

disc visible through unique wide and

curved aperture

• Raised and polished indexes

• Brushed and polished steel hands

• Super-LumiNova Grade®X1 GL C1 moons,

hands, indexes, numerals and outer

date ring

• Exhibition backplate with unique engraved

serial number

• Eco-friendly luxury presentation case

and owner’s handbook

• Italian hand-stitched Shell Cordovan

quick-release strap with Bader deployment,

or ‘Milanese’ mesh bracelet

Technical Information

Calibre Sellita SW220 with ‘JJ04’ module

Case 316L stainless steel

Diameter 40.5mm

Height 12.35mm

Weight 61g

Water resistance 3 ATM (30 metres)

Vibrations 28,800 per hour (4Hz)

Timing tolerance -10/+20 seconds per day

Lug to lug 48.55mm

Strap width 20mm

How to operate your C1 Moonglow

The crown should sit ush to the case (position 1) in order to

maintain water resistance.

• To re-power the watch after a period of non-use, simply wind

the crown in a clockwise direction. Your C1 Moonglow has a

maximum power reserve of 38 hours when fully wound. Normal

wearing will allow the rotor to start re-powering the watch over

time after putting on your wrist.

• To set the date pull out the crown gently into position

. Turn in

a clockwise direction until the red shaded section on the date ring

aligns with the correct date at the edge of the dial.

• To set the time pull out the crown gently into position 3.

This position is used for handsetting and stopping of the

second hand. Turn the crown until you reach the correct time

e.g. 10.08 hr. For precise time setting it is recommended to pass

beyond the desired minute and to set the hand backwards.

• Setting the moon phase is relatively simple. For perfect

synchronization, you will need the date of the last full or new

moon. To adjust the moon phase pull gently into position

Turn in an anti-clockwise direction to rotate the moonphase disk

into the desired position. Rapid correction of the moonphase is

possible at any time without risk of damaging the mechanism.

Setting the time and date

123

PLEASE NOTE:

Date correction should not be carried out between 18.00 hr

and 02.00 hr as the watch gearing will already be aligning itself

to change the date. The crown should always be pushed in after

adjustment, and it is best to do so from position 3 to avoid

advancing beyond the desired date.

1. Manual winding

2. Date and moon phase setting

3.Time setting

Inhaltsverzeichnis

Andere Christopher Ward Betrachten Handbücher

Christopher Ward

Christopher Ward C1 Grand Malvern Worldtimer Benutzerhandbuch

Christopher Ward

Christopher Ward Emily Benutzerhandbuch

Christopher Ward

Christopher Ward C8 UTC Worldtimer Benutzerhandbuch

Christopher Ward

Christopher Ward C60 Shadow Special Edition Benutzerhandbuch

Christopher Ward

Christopher Ward 1 Series Benutzerhandbuch

Christopher Ward

Christopher Ward C60 Abyss SH21 Benutzerhandbuch

Christopher Ward

Christopher Ward Lido Bedienungsanleitung

Christopher Ward

Christopher Ward C65 Black Gold Limited Edition Benutzerhandbuch

Christopher Ward

Christopher Ward C65 Sandhurst Series Benutzerhandbuch

Christopher Ward

Christopher Ward C900 Benutzerhandbuch

Christopher Ward

Christopher Ward C8 Flyer Quartz Benutzerhandbuch

Christopher Ward

Christopher Ward C1 Grand Malvern Moonphase Benutzerhandbuch

Christopher Ward

Christopher Ward C63 Colchester Benutzerhandbuch

Christopher Ward

Christopher Ward C65 Aquitaine GMT Benutzerhandbuch

Christopher Ward

Christopher Ward C9 P2725 TM-B Benutzerhandbuch

Christopher Ward

Christopher Ward C70 DBR1/2 Benutzerhandbuch

Christopher Ward

Christopher Ward C3 Malvern Mk III Benutzerhandbuch

Christopher Ward

Christopher Ward C60 Trident Pro 300 Benutzerhandbuch

Christopher Ward

Christopher Ward C60 Trident Pro COSC Benutzerhandbuch

Christopher Ward

Christopher Ward C7 Rapide ChronographAutomatic Benutzerhandbuch

Christopher Ward

Christopher Ward C700 Benutzerhandbuch

Christopher Ward

Christopher Ward C3 Grand Tourer Benutzerhandbuch

Christopher Ward

Christopher Ward C63 SH21 Snow Leopard Benutzerhandbuch

Christopher Ward

Christopher Ward C60 Sapphire Bedienungsanleitung

Beliebte Betrachten Handbücher anderer Marken

Pandora

Pandora WATCH2 Bedienungsanleitung

Casio

Casio QW-4343 Bedienungsanleitung

Suunto

Suunto X6 Bedienungsanleitung

Seiko

Seiko N830 Bedienungsanleitung

MotionX

MotionX 365 Bedienungsanleitung

Garmin

Garmin VENU SQ 2 Bedienungsanleitung

QCY

QCY Watch GTC Bedienungsanleitung

Canyon

Canyon Cindy CNE-KW41WP Bedienungsanleitung

Esq

Esq Watches Installationsanleitung

Crane

Crane AA5-CDSM-3A Bedienungsanleitung

Timex

Timex W-214 Bedienungsanleitung

DETOMASO

DETOMASO MATERA Bedienungsanleitung

Geemarc

Geemarc Watch N Shake Bedienungsanleitung

LORUS

LORUS W590 Bedienungsanleitung

STENLILLE

STENLILLE Actío Bedienungsanleitung

Casio

Casio 5594 Bedienungsanleitung

Sinn

Sinn HUNTER'S WATCH 3. Edition Bedienungsanleitung

Slazenger

Slazenger SLZ800 Bedienungsanleitung