Christopher Ward C60 Sapphire Bedienungsanleitung
1
Time on your side
Your Christopher Ward watch has been designed in Britain
and engineered in Switzerland by highly talented craftspeople.
This ensures not only accurate and precise timekeeping, but also
brings a real pride of ownership that only watches of the highest
quality standards can hope to deliver.
You have made an investment, a good one, and the aim of this
manual is to help you make the most of that investment in what
we hope will be a lifetime of ownership.
Mike France
CEO & co-founder
Time on your side
C60 Sapphire-Pages.indd 1C60 Sapphire-Pages.indd 1 16/06/2020 16:0616/06/2020 16:06
22
C60 Sapphire-Pages.indd 2C60 Sapphire-Pages.indd 2 16/06/2020 16:0616/06/2020 16:06
3
C60 Sapphire
Congratulations on becoming the owner of a C60 Sapphire.
The result of years of research, experimentation and hard work,
it’s a timepiece that’s both beautiful and tough. Beautiful, because
of the translucent sapphire dial that lets you see deep into the
mechanics of the watch. Tough, because it’s a Trident: a diving
watch able to function at depths of up to 600m.
The dial is made from pure, lab-grown sapphire crystal, machined
to a thickness of just 0.6mm. It’s backed with a layer of blue
polycarbonate that adds a subtle, mesmerising glow. Not only
is sapphire crystal alluring, but its durability means it will continue
looking perfect and unblemished for far longer than virtually any
other material used for dials, including ceramic and enamel.
Powering the watch is a Sellita SW200, a Swiss-made self-winding
movement known for its accuracy and reliability. You’ll be able to
see it working through both the front and back of the watch.
We want to thank you for buying this watch. Wear it in good health.
C60 Sapphire-Pages.indd 3C60 Sapphire-Pages.indd 3 16/06/2020 16:0616/06/2020 16:06
4
Features
• Swiss made
• 26 jewel self-winding mechanical
movement
• 38-hour power reserve
• Christopher Ward ‘Colimaçone’ nish
on rotor
• Anti-shock system
• Brushed and polished marine-grade 316L
stainless steel case
• Screw-down exhibition caseback with
sapphire crystal
• Unidirectional stainless steel bezel
• Unique engraved serial number
• Anti-reective sapphire crystal
• Sapphire crystal dial with twin-ag matte
motif at 12 o’clock
• Date calendar
• Central hacking seconds
• Top-brushed indexes with diamond
polished facets
• Signature Trident counter-balance on
seconds hand
• Super-LumiNova®Grade X1 GL C1-lled
hands and indexes
• Marine-grade stainless steel bracelet or
hybrid rubber strap both with quick-release
mechanism
• Eco-friendly luxury presentation case and
owner’s handbook
C60 Sapphire-Pages.indd 4C60 Sapphire-Pages.indd 4 16/06/2020 16:0616/06/2020 16:06
5
Technical Information
Calibre Sellita SW200
Case 316L stainless steel
Diameter 40mm
Height 12.95mm
Weight 83g
Water resistance 60 ATM (600 metres)
Vibrations 28,800 per hour
Timing tolerance -20/+20 seconds per day
Lug to lug 47.46mm
Strap width 20mm
C60 Sapphire-Pages.indd 5C60 Sapphire-Pages.indd 5 16/06/2020 16:0716/06/2020 16:07
6
How to operate your C60 Sapphire
For a superior water resistance your crown is of the screw-in type.
The crown should sit ush to the case (position 1) in order to
maintain water resistance.
• First unscrew the crown anti-clockwise from the case to position
2for winding in power. Wind in a clockwise direction to re-power
the watch. Your C60 Sapphire has a maximum power reserve of
38 hours when fully wound. Normal wearing will allow the rotor to
start re-powering the watch over time after putting on your wrist.
• Pull gently into position 3. For rapid date correction, turn in a
clockwise direction.
• Pull gently into position 4. This position is used for handsetting
and stopping of the seconds hand. For precise time setting it is
recommended to pass beyond the desired minute and to set the
hand backwards.
Setting the time and date
C60 Sapphire-Pages.indd 6C60 Sapphire-Pages.indd 6 16/06/2020 16:0716/06/2020 16:07
7
1234
Unscrew and then pull
PLEASE NOTE:
Date correction should not be carried out between 20.00 hr and
02.00 hr as the watch gearing will already be aligning itself to
change the date. The crown should always be pushed in after
adjustment, and it is best to do so from position 3to avoid
advancing beyond the desired date. You must always ensure the
crown is fully tightened before any use in water.
1. Crown screw-in position
2. Manual winding
3.Date setting
4.Time setting
C60 Sapphire-Pages.indd 7C60 Sapphire-Pages.indd 7 16/06/2020 16:0716/06/2020 16:07
8
How to operate your C60 Sapphire
If using the bezel for a dive and let’s say the recognised maximum
“no-stop time” is 55 minutes, then in this example (shown right)
the time at the surface immediately before the dive is 10.08am.
However the bezel marker is at the 12.00 hr position.
• Move the bezel marker anti-clockwise so that it aligns with the
8 minute position.
• You can now read that the 55 minute no decompression limit
will occur at 3 minutes past the next hour.
Diving with your watch
PLEASE NOTE:
It is always useful and best practice to make a note on a dive slate
before entering the water and to carry a set of dive tables should the
dive plan change during the course of a dive. A safety stop for 3 to 5
minutes at 15ft is recommended at the end of all dives. A safety stop
for 3 minutes at 15ft is required any time you come within 3 pressure
groups of a no decompression limit, and for any dive to a depth of
100ft or deeper.
C60 Sapphire-Pages.indd 8C60 Sapphire-Pages.indd 8 16/06/2020 16:0716/06/2020 16:07
9
Bezel marker No decompression limit
Start of dive
C60 Sapphire-Pages.indd 9C60 Sapphire-Pages.indd 9 16/06/2020 16:0716/06/2020 16:07
10
How to operate your C60 Sapphire
Straps and bracelets
As you would expect, we place as much
emphasis on the quality of our straps and
bracelets as we do our watches. We only
use the nest materials in our straps,
with quick-release pins also included for
your convenience.
The following guidelines explain how easy
it is to use, adjust and replace your
Christopher Ward strap or bracelet.
1. Locate the quick-release pin (or pins)
on your strap (A) or bracelet (B).
Pull the pin(s) inwards to detach.
2. To reattach your strap (C) or bracelet (D),
pull the pin(s) inwards, and align the
spring bars so that they click securely into
the lug holes on each side.
Using the quick-release pins on your strap/bracelet
A B C D
C60 Sapphire-Pages.indd 10C60 Sapphire-Pages.indd 10 16/06/2020 16:0716/06/2020 16:07
Inhaltsverzeichnis
Andere Christopher Ward Betrachten Handbücher
Christopher Ward
Christopher Ward C60 Trident Bronze Ombre COSC Limited... Benutzerhandbuch
Christopher Ward
Christopher Ward C65 Cranwell 2 Series Benutzerhandbuch
Christopher Ward
Christopher Ward C8 Pilot Revival Special Edition Benutzerhandbuch
Christopher Ward
Christopher Ward C60 Trident Pro 300 Benutzerhandbuch
Christopher Ward
Christopher Ward C65 Sandhurst Bronze 2 Series Benutzerhandbuch
Christopher Ward
Christopher Ward 1 Series Benutzerhandbuch
Christopher Ward
Christopher Ward The Twelve Halo Benutzerhandbuch
Christopher Ward
Christopher Ward C900 Benutzerhandbuch
Christopher Ward
Christopher Ward C60 Trident Elite 1000 Benutzerhandbuch
Christopher Ward
Christopher Ward Lido Bedienungsanleitung
Christopher Ward
Christopher Ward C60 Elite 1000 Benutzerhandbuch
Christopher Ward
Christopher Ward C60 Trident Bronze Benutzerhandbuch
Christopher Ward
Christopher Ward R9 Benutzerhandbuch
Christopher Ward
Christopher Ward C9 PULSOMETER Bedienungsanleitung
Christopher Ward
Christopher Ward C63 Colchester Benutzerhandbuch
Christopher Ward
Christopher Ward C65 trident CLASSIC Benutzerhandbuch
Christopher Ward
Christopher Ward C70MC Grand Prix Series Benutzerhandbuch
Christopher Ward
Christopher Ward C8 'Al Deere' TMB Benutzerhandbuch
Christopher Ward
Christopher Ward C3 Malvern Mk III Benutzerhandbuch
Christopher Ward
Christopher Ward C1 Morgan 3 Wheeler Benutzerhandbuch
