Chroma A190519 Bedienungsanleitung

Get more product & global distributor information in Chroma ATE APP

HV Contact Check Box

A190519

Quick Start Guide

Version 1.1

October 2021

P/N ITM-0257488

Legal Notices

The information in this document is subject to change without notice.

Chroma ATE INC. makes no warranty of any kind with regard to this

manual, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Chroma ATE INC. shall

not be held liable for errors contained herein or direct, indirect, special,

incidental or consequential damages in connection with the furnishing,

performance, or use of this material.

CHROMA ATE INC.

88 Wenmao Rd., Guishan Dist., Taoyuan City 333001, Taiwan

Reproduction, adaptation, or translation of this document without prior

written permission is prohibited, except as allowed under the copyright

laws.

iii

Warranty

All of Chroma’s instruments are warranted against defects in material and

workmanship for a period of one year from date of shipment. Chroma agrees to

repair or replace any assembly or component found to be defective, under normal

use during this period. Chroma’s obligation under this warranty is limited solely to

repairing any such instrument, which in Chroma’s sole opinion proves to be

defective within the scope of the warranty when returned to the factory or to an

authorized service center. Purchaser is responsible for the shipping and cost of the

service item to Chroma factory or service center. Shipment should not be made

without prior authorization by Chroma.

This warranty does not apply to any products repaired or altered by persons not

authorized by Chroma, or not in accordance with instructions furnished by Chroma.

If the instrument is defective as a result of misuse, improper repair, or abnormal

conditions or operations, repairs will be billed at cost.

Chroma assumes no responsibility for its product being used in a hazardous or

dangerous manner either alone or in conjunction with other equipment. High voltage

used in some instruments may be dangerous if misused. Special disclaimers apply

to these instruments. Chroma assumes no liability for secondary charges or

consequential damages and in any event, Chroma’s liability for breach of warranty

under any contract or otherwise, shall not exceed the purchase price of the specific

instrument shipped and against which a claim is made.

Any recommendations made by Chroma regarding the use of its products are

based upon tests believed to be reliable; Chroma makes no warranty of the results

to be obtained. This warranty is in lieu of all other warranties, expressed or implied,

and no representative or person is authorized to represent or assume for Chroma

any liability in connection with the sale of our products other than set forth herein.

CHROMA ATE INC.

88 Wenmao Rd., Guishan Dist.,

Taoyuan City 333001, Taiwan

Tel: 886-3-327-9999

Fax: 886-3-327-8898

e-mail: [email protected]

www.chromaate.com

Material Contents Declaration

The recycling label shown on the product indicates the Hazardous Substances contained in

the product as the table listed below.

: See <Table 1>.

: See <Table 2>.

Part Name

Hazardous Substances

Lead

Mercury

Cadmium

Hexavalent

Chromium

Polybrominated

Biphenyls/

Polybromodiphenyl

Ethers

Selected Phthalates

Group

Cr6+

PBB/PBDE

DEHP/BBP/DBP/DIBP

PCBA

CHASSIS

ACCESSORY

PACKAGE

“O” indicates that the level of the specified chemical substance is less than the threshold level specified in

the standards of SJ/T-11363-2006, EU Directive 2011/65/EU, and 2015/863/EU.

“” indicates that the level of the specified chemical substance exceeds the threshold level specified in the

standards of SJ/T-11363-2006, EU Directive 2011/65/EU, and 2015/863/EU.

Remarks:

1. The CE marking on product is a declaration of product compliance with EU Directive 2011/65/EU, and

2015/863/EU.

2. This product is complied with EU REACH regulation and no SVHC in use.

Disposal

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems

available. If electrical appliances are disposed of in landfills or dumps, hazardous substances

can leak into the groundwater and get into the food chain, damaging your health and well-

being. When replacing old appliances with new one, the retailer is legally obligated to take

back your old appliances for disposal at least for free of charge.

Part Name

Hazardous Substances

Lead

Mercury

Cadmium

Hexavalent

Chromium

Polybrominated

Biphenyls/

Polybromodiphenyl

Ethers

Selected Phthalates

Group

Cr6+

PBB/PBDE

DEHP/BBP/DBP/DIBP

PCBA



CHASSIS



ACCESSORY



PACKAGE

“O” indicates that the level of the specified chemical substance is less than the threshold level specified in

the standards of SJ/T-11363-2006, EU Directive 2011/65/EU, and 2015/863/EU.

“” indicates that the level of the specified chemical substance exceeds the threshold level specified in the

standards of SJ/T-11363-2006, EU Directive 2011/65/EU, and 2015/863/EU.

1. Chroma is not fully transitioned to lead-free solder assembly at this moment; however, most of the

components used are RoHS compliant.

2. The environment-friendly usage period of the product is assumed under the operating environment

specified in each product’s specification.

3. This product is complied with EU REACH regulation and no SVHC in use.

Disposal

Do not dispose of electrical appliances as unsorted municipal waste, use separate collection

facilities. Contact your local government for information regarding the collection systems

available. If electrical appliances are disposed of in landfills or dumps, hazardous substances

can leak into the groundwater and get into the food chain, damaging your health and well-

being. When replacing old appliances with new one, the retailer is legally obligated to take

back your old appliances for disposal at least for free of charge.

Safety Summary

The following general safety precautions must be observed during all phases of

operation, service, and repair of this instrument. Failure to comply with these

precautions or specific WARNINGS given elsewhere in this manual will violate

safety standards of design, manufacture, and intended use of the instrument.

Chroma assumes no liability for the customer’s failure to comply with these

requirements.

BEFORE APPLYING POWER

Verify that the power is set to match the rated input of this

power supply.

PROTECTIVE GROUNDING

Make sure to connect the protective grounding to prevent an

electric shock before turning on the power.

NECESSITY OF PROTECTIVE GROUNDING

Never cut off the internal or external protective grounding

wire, or disconnect the wiring of protective grounding

terminal. Doing so will cause a potential shock hazard that

may bring injury to a person.

FUSES

Only fuses with the required rated current, voltage, and

specified type (normal blow, time delay, etc.) should be

used. Do not use repaired fuses or short-circuited fuse

holders. To do so could cause a shock or fire hazard.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

Do not operate the instrument in the presence of flammable

gases or fumes.

DO NOT REMOVE THE COVER OF THE INSTRUMENT

Operating personnel must not remove the cover of the

instrument. Component replacement and internal adjustment

can be done only by qualified service personnel.

1. Dangerous voltage, the output can up to 20kV.

2. Touching theoutputterminal on the front/rear panel or connecting

the circuitto theoutput when the Electrical Safety/Hipot Analyzer

poweris connectedorundertestingstatus mayresult in death.

WARNING

vii

Safety Symbols

DANGER –High voltage.

Explanation: To avoid injury, death of personnel, or

damage to the instrument, the operator must refer to the

explanation in the instruction manual.

High temperature: This symbol indicates the temperature

is hazardous to human beings. Do not touch it to avoid

any personal injury.

Protective grounding terminal: This symbol indicates

that the terminal must be connected to ground before

operation of the equipment to protect against electrical

shock in case of a fault.

Earth (ground) terminal

Frame or chassis: To identify a frame or chassis

terminal.

Alternating Current (AC)

Direct Current (DC) / Alternating Current (AC)

Direct Current (DC)

Push-on/Push-off power switch

The WARNING sign highlights an essential operating or

maintenance procedure, practice, condition, statement,

etc., which if not strictly observed, could result in injury to,

or death of, personnel or long term health hazards.

The CAUTION sign highlights an essential operating or

maintenance procedure, practice, condition, statement,

etc., which if not strictly observed, could result in damage

to, or destruction of, equipment.

The Notice sign highlights an essential operating or

maintenance procedure, condition, or statement.

WARNING

CAUTION

viii

Inspection and Examination

Before the instrument exit the factory, we have a series of inspection and

measurement on mechanical and electrical characteristics. Make sure its

function of operating for the quality warranty of the product. As soon as the

instrument is unpacked, inspect for any damage that may have occurred in

transit. Save all packing materials in case that the instrument has to be

returned. If damage is found, please file claim with carrier immediately. Do

not return the instrument to Chroma without prior approval.

Standard Accessory

Standard Requirement

Main Unit

Quick Start Guide

Standard Requirement (Cable)

HV Test Cable

4 pcs

HV Test Cable

1 pcs

RTN/LOW

Test Cable

1pcs

24V/0.75A

Power Adaptor

Note

When additional item is required, just inform Chroma the item

name.

Inhaltsverzeichnis

Andere Chroma Prüfgeräte Handbücher

Chroma

Chroma 63200 Series Bedienungsanleitung

Chroma

Chroma 3300 Bedienungsanleitung

Chroma

Chroma 63200 Series Bedienungsanleitung

Chroma

Chroma 63200A Series Betriebsanleitung

Chroma

Chroma 63200 Series Betriebsanleitung

Chroma

Chroma 19572 Bedienungsanleitung

Chroma

Chroma 19501 Series Bedienungsanleitung

Chroma

Chroma 11210 Bedienungsanleitung

Chroma

Chroma 19071 Bedienungsanleitung

Chroma

Chroma 69225 Series Bedienungsanleitung

Chroma

Chroma 63800 Series Betriebsanleitung

Chroma

Chroma 19020 Bedienungsanleitung

Chroma

Chroma 19071 Bedienungsanleitung

Chroma

Chroma 19501-K Bedienungsanleitung

Chroma

Chroma 19020 Bedienungsanleitung

Chroma

Chroma A195001 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung