CHROMATEQ Wi-Light 2 Bedienungsanleitung

English –V.202201

Wi-Light 2 1 User Manual

English –V.202201

Wi-Light 2 2 User Manual

Welcome to the world of CHROMATEQ lighting control software.

Please read this manual carefully and thoroughly before using Wi-Light 2.

The information presented here provides a useful introduction to the wide range of features, settings and functions

available in this mobile application.

This Wi-Light 2 Manual is written in English and French.

(Le manuel technique Wi-Light 2 est rédigé en anglais et en français.)

All products and software are developed and designed in France.

CHROMATEQ SARL

191 Allée de Lauzard

34980 St Gély du Fesc

FRANCE

VAT: FR18521458034

Siret: 52145803400027

Web & E-mail: www.chromateq.com

Phone: +33 952210755 / +86 13422062209

Whatsapp:+8613422062209

Wechat: Chromateq

QQ: 2908265661

Twitter: https://twitter.com/Chromateq

Facebook: https://www.facebook.com/ChromateqCompany/

YouTube : https://www.youtube.com/c/chromateq

- - - - - - - - - - -

No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including

photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher,

except in the case of brief quotations embodied in critical reviews and certain other none commercial uses permitted by

For permission requests, write to the publisher, addressed “Attention: Permissions Coordinator,” at the address above.

Wi-Light 2

User Manual

English –V.202201 
Wi-Light 2 3 User Manual 
SUMMARY 
SUMMARY......................................................................................................................................................................................................3 
QUICK START GUIDE ......................................................................................................................................................................................4 
SMARTPHONE SERVER OR STANDALONE CONNECTION..............................................................................................................................4 
WIFI/ETHERNET/DMX NETWORK EXAMPLE DIAGRAM .............................................................................................................................4 
CONNECT ON ANDROID.............................................................................................................................................................................5 
CONNECT ON IOS ......................................................................................................................................................................................5 
LAUNCHING THE WI-LIGHT 2 APP .................................................................................................................................................................6 
PAGE DESCRIPTIONS.....................................................................................................................................................................................6 
TRIGGER BUTTON PAGE ................................................................................................................................................................................7 
CUSTOMIZING ZONES AND BUTTONS ......................................................................................................................................................7 
COLOUR AND LIVE CONTROL PAGE...............................................................................................................................................................9 
CHANNELS PAGE AND CUSTOM CURSOR ...................................................................................................................................................10 
SINGLE CHANNELS..................................................................................................................................................................................10 
CUSTOM CURSORS..................................................................................................................................................................................11 
SOFTWARE TIMELINE PAGE ........................................................................................................................................................................12 
INTERFACE SETTINGS .................................................................................................................................................................................12 
GENERAL SETTINGS ....................................................................................................................................................................................13 
DISPLAY OPTIONS...................................................................................................................................................................................14 
ADVANCED NETWORK MODE ..................................................................................................................................................................14 
HOW TO USE WI-LIGHT 2 VIA INTERNET .....................................................................................................................................................15 
CREATE YOUR WI-LIGHT 2 ACCOUNT......................................................................................................................................................15 
ADD / REMOVE YOUR INTERFACE TO YOUR ACCOUNT...........................................................................................................................15 
CONTROL THE INTERFACE VIA INTERNET ..............................................................................................................................................16 
DELETE YOUR ACCOUNT .........................................................................................................................................................................16 
TROUBLESHOOTING................................................................................................................................................................................16

English –V.202201

Wi-Light 2 4 User Manual

QUICK START GUIDE

To control an Ethernet DMX interface: 1) Connect the DMX Ethernet interface to the WiFi router

To control a lighting software: 1) Launch the software on a computer connected to the WiFi network

2) Connect the Mobile device to the same WiFi network.

3) Launch the Wi Light 2 App

4) Begin configuring and using the Wi Light 2 app

SMARTPHONE SERVER OR STANDALONE CONNECTION

With the Wi-light 2 application, you can communicate with lighting control software or with standalone Ethernet interfaces.

First, connect your smartphone/tablet to the same WiFi network or WiFi access point as your computer or interface.

Software Smartphone Server: Launch the software, open the Tools menu and click on Start Smartphones server.

Ethernet Interfaces: When the interface is powered, press and hold the button for 4 seconds to enter Advanced Function

mode.

Then go to F2 select DHCP (dh) or static IP (iP) mode. Press to activate the selected mode (DHCP is recommended)

WIFI/ETHERNET/DMX NETWORK EXAMPLE DIAGRAM

English –V.202201

Wi-Light 2 5 User Manual

CONNECT ON ANDROID

After a few seconds, your mobile device will connect to the network and you can now launch the Wi Light 2 app.

The app will detect the control software or DMX Ethernet devices automatically and display them in the settings page.

CONNECT ON IOS

New network connections on Apple devices

may require a few minutes to establish

After a few seconds, the mobile will be connected to the network and you can now launch the Wi Light 2 app.

The app will detect the control software or DMX Ethernet devices automatically and display them in the settings page.

IP addresses are managed by the WiFi router. In DHCP mode, the IP addresses are assigned automatically, but it is also

possible to set static IP addresses for the smartphone/tablet, device and computer. DHCP mode is recommended to

simplify connections.

2- Turn on Wi-Fi on your

mobile

3- Select the desired Wi-Fi

network and enter the

password if needed

1- Go to the general settings

and click on “Wi-Fi”

1- Go to the general settings

and click on “Wi-Fi”

2- Turn on the Wi-Fi on your

mobile

3- Select the desired Wi-Fi

network and enter the

password if needed

English –V.202201

Wi-Light 2 6 User Manual

LAUNCHING THE WI-LIGHT 2 APP

When you launch the Wi-Light 2 app, it will automatically detect the interface or software smartphone server on the network

where your smartphone/tablet is connected. Each detected device is listed and displayed in the Settings page of the App. If

multiple interfaces are connected to the same network, select the interface you want to use. You can select and control

only 1 device per time.

NOTE: In the Settings page, the Application will show if your interface or software is connected to internet or locally.

PAGE DESCRIPTIONS

Display the desired app page by selecting its icon in the lower menu bar.

1- Go to Settings page

2- Select your device or

computer with software

3- The content of your device

or project is displayed in

each zone. Press buttons

to start/stop content.

Triggers, to start/stop

buttons

RGBW Colours and live

controls

Single or customizable Channel

controls, to adjust channels manually

Advanced

Settings page

Exit APP

-Control the software Timeline

-Change the interface clock settings

and parameters

English –V.202201

Wi-Light 2 7 User Manual

TRIGGER BUTTON PAGE

Select the Scene page icon to display the list of scenes saved in the interface.

On top there is the list of zones setup in the interface. (x5 zones maximum)

CUSTOMIZING ZONES AND BUTTONS

Hold a Scene button or Zone icon for several seconds to change its associated display icon.

Hold a Zones button:

Program or

Trigger buttons

Zones

Scene buttons

Show / Hide button

customizations

Menu of available

icons

Show/Hide a

background

image

Change the Zone

name

Displayed scenes

Confirm

Check/Uncheck to

choose displayed

scenes

English –V.202201

Wi-Light 2 8 User Manual

RGB Colour

picker

Change the

Button name

Button countdown

Slide ON/OFF to activate

the timer function

Activate the timer

Stop the scene at the

end of the timer

Display a pie chart on the icon

Display a countdown

from 59s to 0s

Set the timer :

Hours:Minutes:Seconds

Hold a Scene button:

For each scene you can customise a countdown timer and choose if you want to stop the scene at its end.

Show / Hide

customizations

Confirm

Menu of available icons

Icons

Show/Hide a

background

image

English –V.202201

Wi-Light 2 9 User Manual

1- Open the browser

2- Select the desired picture

4 - Confirm

3 - Validate the picture

Background image

For each zone and scene button, to add a picture as a background click to “Display/Hide a background image” in the button

customization mode.

COLOUR AND LIVE CONTROL PAGE

Select the colour page icon to display colour controls.

3 modes are available: colour picker (wheel), sliders and basic controls.

Use the RGB

palette or sliders to

apply a colour

English –V.202201

Wi-Light 2 10 User Manual

CHANNELS PAGE AND CUSTOM CURSOR

SINGLE CHANNELS

Select the channel page icon to manually control individual channels.

This mode can be used to adjust the light intensity of simple cool or warm white devices with a single DMX channel.

Speed: change the speed of

the current scene

Dimmer: adjust light output

intensity of the current

scene in the selected zone

Black-out: all fixtures

light output off

Highlight: all fixtures output

white at maximum intensity

Next: jump to the next scene

in the list

Pause: current scene pauses

Slide ON/OFF to resume the current scene

values and cancel the Live colour

Click to cancel the

modification

Click to apply

the modification

Scroll through 32 cells at a time to browse

the 512 channels of the current universe

Select a DMX universe

(from 1 to 4)

Slide ON/OFF to cancel the

changes on all channels

The level settings remain

active until they are

deactivated

Click on the channel and set

the DMX level manually

Inhaltsverzeichnis

Andere CHROMATEQ USB-Schnittstelle Handbücher

CHROMATEQ

CHROMATEQ CQSA-E 1024 Bedienungsanleitung

CHROMATEQ

CHROMATEQ CQSA 512 Bedienungsanleitung

Beliebte USB-Schnittstelle Handbücher anderer Marken

PASCO

PASCO SCIENCEWORKSHOP 750 Bedienungsanleitung

Phonic

Phonic FIREFLY 302 USB Bedienungsanleitung

OHAUS

OHAUS Scout STX Series Bedienungsanleitung

Denon

Denon DN-HC4500 - DJ Mixer USB Controller Bedienungsanleitung

Lutron Electronics

Lutron Electronics Stanza SZ-CI-USB-CPN5138 Bedienungsanleitung

Paradox

Paradox PMC5-TI00 Bedienungsanleitung

System Sensor

System Sensor M200WC-RF Leitfaden

Philips

Philips PDIUSBD12 Bedienungsanleitung

KNX

KNX Module IC-USB-S.1 Bedienungsanleitung

Velleman

Velleman KSR10/USB Bedienungsanleitung

NIEUWKOOP

NIEUWKOOP RG7100 Installationsanleitung

Alldaq

Alldaq ADQ-USB 2.0-ISO Bedienungsanleitung

Thorsis Technologies

Thorsis Technologies isDNet USB Bedienungsanleitung

Thorsis Technologies

Thorsis Technologies isHRT USB Bedienungsanleitung

microHAM

microHAM DigiKeyer Bedienungsanleitung

Apogee

Apogee Jam X Bedienungsanleitung

RigExpert

RigExpert TI-3000 Bedienungsanleitung

microHAM

microHAM USB Interface II Bedienungsanleitung