CIAT MAGISTER Series Bedienungsanleitung

Instruction manual

MAGISTER

10 - 2015

NA 14.54 B

EN - 1 N 14.54 B

SOMMAIRE PAGE

1 - INTRODUCTION 2

2 - RECEIPT OF GOODS 2

2.1 Checking the equipment 2

2.2 Identifying the equipment 2

2.3 Documents 3

3 - SAFETY INSTRUCTIONS 3

4 - WARRANTY 3

5 - STORAGE OF EQUIPMENT 3

6 - HANDLING 3

6.1 Weights and dimensions: 4

7 - SUPPLY AIR TYPE 5

8 - LOCATION & INSTALLATION 5

9 -

LOCATION AND MARKING OF COMPONENTS

10 - CONNECTIONS 9

10.1 Hydraulic connections (CW) 9

10.2 Refrigerant connections (DXA model) 10

10.3 Electrical connections 12

11 - TECHNICAL SPECIFICATIONS 15

11.1 Basic component 15

11.1.1 Control 15

11.1.2 Fan motor assembly (FMA) 15

11.1.3 Cooling Coil: CW model 17

11.1.4 Direct Expansion Coil and Refrigerant Circuit

: 17

11.1.5 Filter 19

11.1.6 Standard control elements: 19

11.2 Optional components 19

11.2.1 Heating Coil 19

11.2.2 Electric heater 20

11.2.3 Humidifier 21

11.2.4 Condensate drain pump 22

11.2.5 Bases: 23

11.2.6 Plenums: 24

11.2.7 Intake damper on the vertical unit: 25

11.2.8 Optional control elements 25

11.2.9 Lon gateway 28

12 - COMMISSIONING 28

13 - MAINTENANCE 29

13-1 Filters 30

13-2 Cooling coil 31

13-3 Electric heater 31

13-4 Humidifier 32

13-5 Fans 33

13-6 Electrics box 39

14 - SERVICE INTERVALS 39

15 - OPERATING READINGS 39

Original text: English Version

EN - 2 N 14.54 B

1 - INTRODUCTION

2.1 Checking the equipment

In accordance with Article 133-3 of the French Code of Commerce, the recipient is entirely responsible for checking the condition

of the goods received.

In the event of missing items, the customer must provide the exact number of parcels delivered.

Any damaged or missing items must be specified on the delivery note in the presence of the driver before signing the delivery

note.

These comments must be confirmed to the carrier by registered letter within three business days.

The comments "conditional" and "pending unwrapping" shall have no value.

The client must unwrap the goods in the presence of the driver.

Claims must be made at the time of delivery and be described in detail.

Introduction to the range:

Magister is a range of precision close control units (temperature and humidity) that is specifically adapted to meet the needs of

premises with high heat loads or of sensitive locations (data centers, computer rooms, metrology laboratories, etc.).

The MAGISTER range is available with two types of operation:

- Chilled water (CW)

- Direct expansion (DXA) linked to two air-cooled condensers

The description of the unit is indicated using the following format:

MAGISTER X X X

Example of description: MAGISTER CW40 UNDER1 123 4

1Range

2Unit type

3Cooling capacity

4Assembly type (direction of air ow)

2 - RECEIPT OF GOODS

2.2 Identifying the equipment

Each unit has a name plate located at the bottom of the electrics box that bears an identification number. This number must be

quoted in all correspondence.

Designation/Description

30, av Jean Falconnier

01300 CULOZ (FRANCE)

Tél.: 33-(0)4-79-42-42-42

www.ciat.com Made in France

Ref. produit/Item Nbr

An(Year)

N. Serie/Serial Nbr

Fluide - Charge/Fluid - Load Froid/Cold Tension/Voltage

Intensité/CurrentRegimeBP/LP Mini

HP Maxi Chaud/Heat Poids/Weight

N° Declaration CERegime - TypeTemp. Maxi (°C)

Repere/Part

02183458/0008

7323226.333462 MAGISTER CW030 3OVER

7033238.12

2014

- CW: chilled water

- DXA: direct expansion

- UNDER: downwards

- OVER: upwards

Product reference

Product description

Year manufactured

Serial no. (to be quoted in all

correspondence)

Type of fluid used in the exchanger and

operating pressure.

Cooling capacity + water temperature used

- Heating capacity + water temperature used (if heating coil option)

+ usage type (2 stages or TRIAC, if electric heater option)

Cabinet information

- Supply voltage

- Max. current

- Weight of the device

EN - 3 N 14.54 B

Appropriate PPE (Personal Protective Equipment)

must be worn when servicing the units

Warning

The unit must be installed and maintained by a qualified, experienced technician. Follow the operating

precautions to the letter when carrying out work on the unit. Labels have been placed on the unit to remind you

of the safety instructions. As a general rule, follow all applicable safety regulations and standards.

3 - SAFETY INSTRUCTIONS

2.3 Documents

The following documents should be inside the cabinet:

- Instruction manual

- Control manual

- Electrical diagram of the cabinet

- Key to the electrical diagram

- Dimensional drawing with connection diagram

- Additional diagrams depending on options

4 - WARRANTY

See general terms and conditions of sale.

5 - STORAGE OF EQUIPMENT

The cabinet must be stored in a dry, sealed area, away from moisture and frost. The temperature in this area must not exceed 50°C.

6 - HANDLING

The unit must be handled either with a pallet truck or using a spreader beam and slings. This operation must be carried out by

qualified personnel: refer to the information on the label affixed to the equipment.

Warning: The unit must be handled with care and kept vertical.

In all cases, the vertical unit must be raised by its base.

Handling with a pallet truck

EN - 4 N 14.54 B

SIZE Dimensions

H x W x D Weight (kg)

CW 40 1990 x 1190 x 890 350

CW 53 1990 x 1520 x 890 385

CW 78 1990 x 2070 x 890 545

CW 100 1990 x 2620 x 890 635

CW 115 1990 x 3000 x 890 730

Indoor unit Outdoor unit

Size Dimensions

H × W × D

Weight

(kg) Size Quantity Dimensions

H × W × D

Empty unit

weight (kg)

DXA 59 1990 x 2070 x 890 510 CD 100 2 1393 x 1543 x 1053 290

DXA 65 1990 x 2070 x 890 510 CD 120 2 1393 x 1543 x 1053 290

DXA 70 1990 x 2620 x 890 620 CD 120 2 1393 x 1543 x 1053 290

DXA 85 1990 x 2620 x 890 620 CD 150 2 1393 x 1543 x 1053 350

6.1 Weights and dimensions:

Outdoor unit: please refer to the Condenciat CD N06.130 manual

1100

2500 mini

If the unit is lifted using a spreader beam and slings:

- Protect the panels.

- First remove all the caps covering the holes for the tubing on the lower section of the equipment. (Fig. 1).

- Use tubing (Ø max. = 40mm) with a sufficient lifting capacity (see weight table).

- Use fabric slings.

Handling with a spreader beam

and slings

To be removed while handling,

then replaced once the vertical

unit is in place

EN - 5 N 14.54 B

7 - SUPPLY AIR TYPE

3 supply air types:

1000 mm

500 mm

Fitting UNDER

Return air above

supply air underneath

You must leave space for access to the front and to the right of the unit for maintenance and installation operations.

For free air intake, there must be at least 500 mm above the unit.

8 - LOCATION & INSTALLATION

Fitting OVER

Return air on front, supply

air above except CW115

Return air underneath, supply air

above except CW115 and DXA

EN - 6 N 14.54 B

9 - LOCATION AND MARKING OF COMPONENTS

CW40 to CW100, Under Assembly

Filters

FMA

FMA access

hatch

Control valve

(cooling coil)

Humidifier

(option)

Heating coil

(option)

Control valve

(Heating coil)

Cooling coil

Electrics Box

Cooling coil

Electric heater

(option)

Additional cabinet

Drain pump (option)

Condensate drain

pump (option)

Under no circumstances should these vertical units be installed in an atmosphere that is:

- Explosive

- Flammable

- Corrosive

or dusty.

Once at the place of installation, remove the wooden blocks.

● Different configuration options are possible:

The unit can be placed directly on the floor. In this case:

The unit must be placed on a flat, smooth surface which is as level as possible (ratio of approx. one to one thousand).

The cabinet frame must rest fully on its contact surface.

The unit need not be anchored to the floor if it is operated under normal conditions.

Or on one of the following bases:

Support base, cased base with grids, cased base with damper.

(See the technical characteristics for these options in paragraph 12.2).

It should be placed on a floor that is as level as possible.

Each base comes with feet, which allow the height to be adjusted (in the event of a raised floor) and the base to be levelled

before placing the unit on top.

Before placing the vertical unit on top, an adhesive seal (supplied with the option) is to be placed on the aluminium casing frame

to ensure its tightness.

The cabinet can also come with a plenum with grids or a free-cooling plenum.

(See the technical specifications for these options in paragraph 12.2)

Before placing the plenum on the vertical unit, apply the adhesive seal (supplied with the option) to its tightness.

For some models (CW115 and DXA) and for practical reasons, when the unit is in its final position, the horizontal gussets (with

oblong stamped holes), located at the bottom of the unit, can be removed (see photo).

Horizontal

gussets

EN - 7 N 14.54 B

CW40 to CW100, Over Assembly

FMA

Electrics Box

Control valve

(Heating coil)

Cooling coil

Heating coil

(option)

Control valve

(cooling coil)

Humidifier

(option)

Filters

Cooling coil

Electric heater

(option)

Condensate drain

pump (option)

Additional cabinet

Drain pump (option)

CW115, Under Assembly

Electric heater

(option)

Access

hatches

Filters

Electrics Box

Cooling coil

Control valve

FMA

EN - 8 N 14.54 B

Electrics Box

FMA

Direct

expansion coil

Expansion valve

Liquid sight glass

Solenoid valve

Tank

Humidifier (option)

FMA

access hatches

Filters

Direct

expansion

coil

Electric

heater

(option)

Additional cabinet

for pump (option) Condensate drain

pump (optional)

DXA 59 to 85, Over Assembly

Filters

Direct

expansion coil

Expansion valve

Liquid sight glass

Solenoid valve

Liquid tank

Humidifier

FMA

Electrics Box

FMA

access hatches

Condensate drain

pump (optional)

Additional cabinet

Drain pump

(option)

Electric

heater

(option)

Direct

expansion coil

DXA 59 to 85, Under Assembly

Electrics Box

Andere Handbücher für MAGISTER Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere CIAT Klimaanlage Handbücher

CIAT

CIAT EREBA 8H Bedienungsanleitung

CIAT

CIAT MELODY Leitfaden

CIAT

CIAT 42HV09JSC Bedienungsanleitung

CIAT

CIAT COADIS LINE 600 Bedienungsanleitung

CIAT

CIAT 42HU18VSC Bedienungsanleitung

CIAT

CIAT 42HK09VSC Bedienungsanleitung

CIAT

CIAT Melody 2 Bedienungsanleitung

CIAT

CIAT Ciatronic EG 5 Leitfaden

CIAT

CIAT 42HU18VSC Bedienungsanleitung

CIAT

CIAT CLIMACIAT COMPACT Bedienungsanleitung

CIAT

CIAT 42HY09VSC Bedienungsanleitung

CIAT

CIAT CiatCooler LC Bedienungsanleitung

CIAT

CIAT 42HY18V Bedienungsanleitung

CIAT

CIAT Climaciat Bedienungsanleitung

CIAT

CIAT COADIS LINE 600 Bedienungsanleitung

CIAT

CIAT twist SW Series Bedienungsanleitung

CIAT

CIAT SPACE ZV Series Leitfaden

CIAT

CIAT Coadis 235/11 Bedienungsanleitung

CIAT

CIAT Major2 NCH Leitfaden

CIAT

CIAT MAJOR LINE Bedienungsanleitung

CIAT

CIAT condenciat CD Bedienungsanleitung

CIAT

CIAT 42HC09VSC Bedienungsanleitung

CIAT

CIAT CONDENCIAT CL2 Bedienungsanleitung

CIAT

CIAT Splitciat SEO Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung

Carrier

Carrier 42HVM109303 Bedienungsanleitung