BACnet/IPSettings
On this screen, a user can configure the following parameters
1.
IP Address
–IP address of device.
2. Network Mask –Subnet mask for the subnet your device is on.
3.
Default Gateway
–IP address of default gateway
4. BACnet UDP Port –BACnet UDP port (Default is 47808. In some cases e.g. a situation
where it is desirable for two groups of BACnet devices to coexist independently on the
same IP subnet, the UDP port may be configured locally to a different value.
5. BACnet Device Number –Or Device ID. It is a numeric code that is used to identify the
BACnet Device. Default ID is generated from the MAC address of B6060.
6.
BBMD IP Address
–If you want B6060 to be a foreign device then here you specify IP
address of target BBMD. It will enable Foreign Device mode.
To find out more about Foreign device and BBMD visit:
http://www.bacnet.org/Bibliography/ES-7-
99/IPPART2.HTM
http://www.bacnet.org/Tutorial/BACnetIP/sld015.html
7.
A Description for the Device
–Location/application string (0-63 characters) to help user
find the Device Object Name.
Advanced Setting
–If you enabled B6060 as a foreign device specify here Subscription
time to live (TTL). It is recommended you leave default value in this field.
Upon receipt of the message, the BBMD adds the foreign device to its Foreign-Device-Table
(FDT) and starts a timer equal to the Time-to-Live parameter (hereafter "TTL") plus a fixed
"grace period" of 30 seconds. If the foreign device fails to re-register before the timer
expires, the BBMD may delete the foreign device from its FDT.
